Lifetime 0111 Owner's manual

Lifetime
Brand
Lifetime
Model
0111
Type
Owner's manual
MODEL N° 0111
OWNER’S MANUAL
OUTDOOR STORAGE
Keep this Identification Number in case you need to contact our Customer Service Department.
2
Most injuries are caused by misuse and/or not following instructions. Use caution when using this product.
To ensure safety, do not attempt to assemble this product without following the instructions carefully. Check entire box and inside all
packing material for parts and/or additional instruction material. Before beginning assembly, read the instructions and identify parts
using the hardware identifi er and parts list in this document. Proper and complete assembly, use and supervision are essential to
reduce the risk of accident or injury.
FAILURE TO FOLLOW THESE WARNINGS MAY RESULT IN SERIOUS INJURY OR
PROPERTY DAMAGE AND WILL VOID WARRANTY.
s$ONOTUSEORSTOREHOTOBJECTSSUCHASGRILLSBLOWTORCHESWELDINGEQUIPMENTETCNEARTHEPRODUCT
s)FUSINGALADDERDURINGASSEMBLYUSEEXTREMECAUTION
s4WOCAPABLEADULTSAREREQUIREDFORASSEMBLY)TISALSORECOMMENDEDTHATATHIRDADULTFUNCTIONASANINSTRUCTIONREADER
SAFETY INSTRUCTIONS
REGISTER YOUR LIFETIME PRODUCT TODAY!
LIFETIME’S PROMISE TO YOU:
We invite you to read our privacy policy at www.lifetime.com
REGISTER today!
There are benefi ts to registering your Lifetime product. With our new online product registration form, it’s fast and easy! Register with us at www.lifetime.com
and enjoy these great benefi ts:
s2ECEIVEEXCLUSIVEMONEYSAVINGOFFERSFROM"UY,IFETIMECOMOURONLINESTOREASWELLAS.%7PRODUCTNOTIlCATIONSANDSPECIALCLOSEOUT
promotions!
s)NTHEUNLIKELYEVENTOFAPRODUCTRECALLORSAFETYMODIlCATIONWEWILLNOTIFYYOU
s2EGISTERINGYOURPRODUCTGUARANTEESYOUWARRANTYSERVICE)FYOUDONOTREGISTERYOURPRODUCTYOURWARRANTYRIGHTSWILLNOTBEDIMINISHED
But you will need to provide a sales receipt to verify your product purchase date before warranty service will be provided.
Maintaining your privacy is our long-standing policy at Lifetime. And you can rest assured that Lifetime will not sell or provide your
personal data to other third parties, or allow them to use your personal data for their own purposes.
**For customers outside the U.S. or Canada, please contact the store for assistance.**
**U.S. and Canada customers ONLY**
)&!33)34!.#%)3.%%$%$
DO NOT CONTACT THE STORE!
CALL OUR CUSTOMER SERVICE DEPARTMENT at 1 (800) 225-3865
(/523AMTOPM-ONDAYTHROUGH&RIDAY-OUNTAIN3TANDARD4IME
**Call, or visit our Web site for Saturday hours**
INSTRUCTION #1048528 B 8/18/2010
3
Electric Drill 1/4" Drill BitMeasuring Tape

FOREACHPERSON
TOOLS REQUIRED FOR ASSEMBLY
BEFORE BEGINNING ASSEMBLY
+EEPTHEHARDWAREBAGSANDTHEIRCONTENTSSEPARATE)FANYPARTSAREMISSINGCALLOUR
#USTOMER3ERVICE$EPARTMENT
)DENTIFY AND INVENTORY ALL PARTS AND HARDWARE USING THE PARTS AND HARDWARE LISTS AND
identifi ers in this document.
Safety GlassesPhillips Screwdriver
4
This area is located at the top, left-hand
corner of the page and indicates which tools
and hardware are needed to complete the
assembly steps on a page.
This area is located at the top, right-hand
corner of the page and shows an image of the
product with shaded parts indicating which
section is being assembled.
SEC
#
Note:
!
Refer to the following areas throughout the instructions
to assist in the assembly process:
This area is usually located in the bottom,
left-hand corner of a step and indicates that
special attention is needed to perform a
particular part of a step.
These areas are usually located in the bottom,
right-hand corner of a step and indicate that
damage to the product or serious injury may
occur if the caution or warning is not heeded.
Throughout the Parts & Hardware List, Part
& Hardware Identifi ers, and instructions
are three-letter IDs. These IDs are below
the images of the parts and hardware to
help you locate and identify the parts and
hardware during assembly. These IDs are not
necessarily on the parts themselves.
WARNING
ASSEMBLY GUIDES
TOOLS AND HARDWARE REQUIRED FOR THIS PAGE
CAUTION
ADZX
vXv0AN(EAD3CREW
5
ID Description Quantity
Main Parts
!9) 3HUTTER 
BJI Shutter Hardware Bag
!$3 vXv0HILLIPS0AN(EAD3CREW 
PARTS & HARDWARE LIST
HARDWARE IDENTIFIER
PARTS IDENTIFIER
SHUTTER HARDWARE BAG [BJI]
Hardware is shown at actual size
0ARTSHOWNATOFACTUALSIZE
ADSX
X0HILLIPS0AN(EAD3CREW
AYIX
Shutter
Note: Identify the size of your shed (8’ or 11’), and then use the correct section.
8’ Shed instructions start on page 6. 11’ Shed instructions start on page 9.
!
Note: Throughout the Parts & Hardware List, Part & Hardware Identifiers, and instructions are three-
letter IDs. These IDs are below the images of the parts and hardware to help you locate and identify
the parts and hardware during assembly. These IDs are not necessarily on the parts themselves.
!
6
TOOLS AND HARDWARE REQUIRED FOR THIS PAGE
SEC
#1
#3
#3
#1
Grooves from Left
Grooves from right
9 1/2"
32 1/4"
SEC
"ELOWISAMAPOFPOTENTIALSCREWHOLELOCATIONS9OUWILLUSETHESELOCATIONSINTHENEXTSTEP3OMESHEDSWILL
HAVESMALLBUMPSMOLDEDINTOTHEPLASTICATTHELOCATIONSSHOWN)FTHEREARENOBUMPSMEASURECAREFULLYBEFORE
DRILLINGINTHENEXTSTEP4HELEFTSIDEHOLESAREFOUNDINTHElRSTANDTHIRDGROOVESCOUNTINGFROMTHELEFTWALLSEAM
The right side holes are in the fi rst and third grooves, counting from the right wall seam.
SHUTTER INSTALLATION FOR 8’ SHEDS
NO HARDWARE REQUIRED FOR THIS PAGE
1.1
1
7
TOOLS AND HARDWARE REQUIRED FOR THIS PAGE
SEC
Window Panel located here
Left Wall Panel Right Wall Panel
SEC
5SEA"$RILL"ITTODRILLHOLESFROMTHEINSIDEOFTHESHEDATTHELOCATIONSSHOWN2EFERTOPREVIOUSSTEPFOR
measurements.
1/4" Drill Bit
NO HARDWARE REQUIRED FOR THIS PAGE
1.2
1
8
TOOLS AND HARDWARE REQUIRED FOR THIS PAGE
SEC
Outside of Shed
Use hole #1 (the far right hole in
each grouping) for this shutter.
Use hole #2 (the far left hole in
each grouping) for this shutter.
AYI AYI
Back of Shutter
8L
8R
10
8L
8R
10
SEC
,OOKATTHEDIAGRAMSBELOWANDTHEHOLESATTHETOPANDTHEBOTTOMOFTHESHUTTERTODETERMINEWHICHSETYOU
should use.
(AVEONEPERSONLINEUPTHECORRECTHOLESINTHEBACKOFTHESHUTTERSWITHTHEHOLESTHATYOUPREDRILLED!
second person, inside the shed will insert a 1/4" x 3/4" Phillips Pan-Head Screw (ADS) through the shed and into the
Shutter (AYI)$OTHISFOREACHOFYOURPREDRILLEDHOLES
ADSX
1
1.3
9
TOOLS AND HARDWARE REQUIRED FOR THIS PAGE
SEC
#2
#4
#3
#1
Grooves from left
Grooves from right
10"
32 3/4"
SHUTTER INSTALLATION FOR 11’ SHEDS
SEC
"ELOWISAMAPOFPOTENTIALSCREWHOLELOCATIONS9OUWILLUSETHESELOCATIONSINTHENEXTSTEP3OMESHEDS
WILLHAVESMALLBUMPSMOLDEDINTOTHEPLASTICATTHELOCATIONSSHOWN)FTHEREARENOBUMPSMEASURECAREFULLY
BEFOREDRILLINGINTHENEXTSTEP4HE,EFTSIDEHOLESAREFOUNDINTHESECONDANDFOURTHGROOVESCOUNTINGFROM
the left wall seam. The right side holes are in the fi rst and third grooves, counting from the right wall seam.
NO HARDWARE REQUIRED FOR THIS PAGE
2.1
2
10
TOOLS AND HARDWARE REQUIRED FOR THIS PAGE
SEC
Window Panel located here
Left Wall Panel
Right Wall Panel
SEC
5SEA"$RILL"ITTODRILLHOLESFROMTHEINSIDEOFTHESHEDATTHELOCATIONSSHOWN2EFERTOPREVIOUSSTEPFOR
measurements.
1/4" Drill Bit
NO HARDWARE REQUIRED FOR THIS PAGE
2.2
2
11
TOOLS AND HARDWARE REQUIRED FOR THIS PAGE
SEC
Outside of Shed
Use hole N° 3 (the center hole in each
grouping) for this shutter.
Use hole N° 3 (the center hole in
each grouping) for this shutter.
AYI
AYI
Back of Shutter
,
2

,
2

SEC
,OOKATTHEDIAGRAMSBELOWANDTHEHOLESATTHETOPANDBOTTOMOFTHESHUTTERTODETERMINEWHICHSETYOUSHOULD
use.
(AVEONEPERSONLINEUPTHECORRECTHOLESINTHEBACKOFTHESHUTTERSWITHTHEHOLESTHATYOUPREDRILLED!SECOND
person, inside the shed will insert a 1/4” Phillips Pan-Head Screw (ADS) through the shed and into the Shutter (AYI)$O
THISFOREACHOFYOURPREDRILLEDHOLES
ADSX
2.3
2
12
10-YEAR LIMITED FACTORY WARRANTY
THE MANUFACTURER RESERVES THE RIGHT TO MAKE SUBSTITUTIONS TO WARRANTY CLAIMS IF PARTS ARE UNAVAILABLE OR OBSOLETE.
,IFETIMEOUTDOORSHEDSAREWARRANTEDTOTHEORIGINALPURCHASERTOBEFREEFROMDEFECTSINMATERIALORWORKMANSHIP
FORAPERIODOFTENYEARSFROMTHEDATEOFORIGINALRETAILPURCHASE4HEWORDhDEFECTSvISDElNEDASIMPERFECTIONSTHAT
IMPAIRTHEUSEOFTHEPRODUCT$EFECTSRESULTINGFROMMISUSEABUSEORNEGLIGENCEWILLVOIDTHISWARRANTY4HISWARRANTY
does not cover defects due to improper installation, alteration or accident. This warranty does not cover damage caused
BYVANDALISMRUSTINGhACTSOFNATUREvORANYOTHEREVENTBEYONDTHECONTROLOFTHEMANUFACTURER
4HISWARRANTYISNONTRANSFERABLEANDISEXPRESSLYLIMITEDTOTHEREPAIRORREPLACEMENTOFDEFECTIVEPRODUCT)FTHE
PRODUCTISDEFECTIVEWITHINTHETERMSOFTHISWARRANTY,IFETIME0RODUCTS)NCWILLREPAIRORREPLACEDEFECTIVEPARTSAT
no cost to the purchaser. Shipping charges to and from the factory are not covered and are the responsibility of the
PURCHASER,ABORCHARGESANDRELATEDEXPENSESFORREMOVALINSTALLATIONORREPLACEMENTOFTHESHEDORITSCOMPONENTS
are not covered under this warranty.
4HISWARRANTYDOESNOTCOVERSCRATCHINGORSCUFlNGOFTHEPRODUCTTHATMAYRESULTFROMNORMALUSAGE)NADDITION
defects resulting from intentional damage, negligence, unreasonable use or hanging from the truss will void this
warranty.
,IABILITYFORINCIDENTALORCONSEQUENTIALDAMAGESISEXCLUDEDTOTHEEXTENTPERMITTEDBYLAW7HILEEVERYATTEMPTIS
MADETOEMBODYTHEHIGHESTDEGREEOFSAFETYINALLEQUIPMENTFREEDOMFROMINJURYCANNOTBEGUARANTEED4HEUSER
ASSUMESALLRISKOFINJURYRESULTINGFROMTHEUSEOFTHISPRODUCT!LLMERCHANDISEISSOLDONTHISCONDITIONANDNO
representative of the company may waive or change this policy.
4HISPRODUCTISNOTINTENDEDFORINSTITUTIONALORCOMMERCIALUSE,IFETIME0RODUCTS)NCDOESNOTASSUMEANYLIABILITYFOR
SUCHUSE)NSTITUTIONALORCOMMERCIALUSEWILLVOIDTHEWARRANTY
6. This warranty is expressly in lieu of all other warranties, expressed or implied, including warranties of merchantability
ORlTNESSFORUSETOEXTENTPERMITTEDBY&EDERALANDSTATELAW.EITHER,IFETIME0RODUCTS)NCNORANYREPRESENTATIVE
assumes any other liability in connection with this product. This warranty gives you specifi c legal rights, and you may
also have other rights which vary from state to state.
ALL WARRANTY CLAIMS MUST BE ACCOMPANIED BY A SALES RECEIPT.
To register the product, visit our Web site at www.lifetime.com
REPORT PRODUCT DEFECTS IN WRITING TO:
,IFETIME0RODUCTS)NC0/"OX#LEARlELD54
ORCALL-&AMTOPM-34
Please include your dated sales receipt and photographs of damaged parts.
R
www.lifetime.com
©,IFETIME0RODUCTS)NC
0/"OXs&REEPORT#ENTER"LDG$#LEARlELD5TAH
4s&
LIFETIME OUTDOOR SHED EQUIPMENT
13
ENHANCE YOUR LIFETIME
®
PURCHASE BY ADDING ACCESSORIES OR OTHER GREAT PRODUCTS
Or call: 1-800-424-3865
To purchase accessories or other Lifetime Products, visit us at:
www.lifetime.com
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13

Lifetime 0111 Owner's manual

Lifetime
Brand
Lifetime
Model
0111
Type
Owner's manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents