Miller KD540406 Owner's manual
- Category
- Welding System
- Type
- Owner's manual
This manual is also suitable for
Miller KD540406 is a Pulser Control designed for GTAW-P Welding. It requires a suitable welding power source using a positive reference command signal not to exceed +10 Volts DC and a 14-pin receptacle. This device allows the operator to control pulse waveform with various gases, metals, and joints. It provides control of output (contactor), pulses per second (frequency), peak amperage, % of on time (pulse width), and background amperage. The unit also provides remote peak amperage, remote background amperage, and remote output (contactor) control.
Miller KD540406 is a Pulser Control designed for GTAW-P Welding. It requires a suitable welding power source using a positive reference command signal not to exceed +10 Volts DC and a 14-pin receptacle. This device allows the operator to control pulse waveform with various gases, metals, and joints. It provides control of output (contactor), pulses per second (frequency), peak amperage, % of on time (pulse width), and background amperage. The unit also provides remote peak amperage, remote background amperage, and remote output (contactor) control.
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
Miller KD540406 Owner's manual
- Category
- Welding System
- Type
- Owner's manual
- This manual is also suitable for
Miller KD540406 is a Pulser Control designed for GTAW-P Welding. It requires a suitable welding power source using a positive reference command signal not to exceed +10 Volts DC and a 14-pin receptacle. This device allows the operator to control pulse waveform with various gases, metals, and joints. It provides control of output (contactor), pulses per second (frequency), peak amperage, % of on time (pulse width), and background amperage. The unit also provides remote peak amperage, remote background amperage, and remote output (contactor) control.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Miller PC-300 Owner's manual
-
-
-
-
-
-
-
-
-
Miller JK674521 Owner's manual
