1. Take off knuckle guard.
2. Take off top hinge with a screw driver.
a. Rotate feet clockwise to heighten;
b. Rotate feet anti-colckwise to lower.
Door Reverse
levelling the appliance
Front door
3. Take off the door of refrigerating chamber
4. Take off middle hinge with a screw driver
5. Take off the door of freezing chamber
6. Take off hinge assembly with a screw
driver
7. Take off top hinge stopple, middle hinge
stopple and adjuster
8. Take off door sleeve and door holder
9. Assemble lower hinge assembly to left
side of the cabinet with a screw driver
10. Assemble the adjuster to the right side
of the cabinet
11. Assemble door shaft sleeve and door
holder of refrigerating chamber to the other
side of the door
12. Assemble the door of refrigerating
chamber on the lower hinge
13. Assemble middle hinge to the left side
of the cabinet with a screw driver
14. Assemble door shaft sleeve and door
holder of freezing chamber to the other side
of the door
15. Assemble the door of freezing chamber
on the middle hinge
16. Assemble top hinge to the left side of the
cabinet with a screw driver
17. Assemble knuckle guard, top hinge
stopple and middle hinge stopple to the
relative positions on the other sid
1
2 3
4
9
10 11
12
13
17
14 15
16
5
6
7
8