Yealink CPW90 V1.1 DE ES FR Quick start guide

Type
Quick start guide

This manual is also suitable for

CP Wireless Expansion Mic
CPW90
Quick Start Guide (V1.1)
www.yealink.com
English | Deutsch | Español | Français
Table of Contents
English ............................................................ 1
Deutsch .........................................................11
Español ..........................................................21
Français .........................................................31
Mute Button
Built-in Microphone
Battery Indicator
1
2
3
4
Charging Slot
1
2
1
2
Packaging Contents
The CPW90 Component Instruction
Charging the CPW90
The following items are included in your package. If you find anything
missing, contact your system administrator.
Charging Cradle
Wireless Expansion Mic×2
0.3m Micro
USB Cable
Quick Start Guide
0.3m Micro USB Cable
CP960 Conference Phone
Put the CPW90 on the charging cradle.
Connect the micro USB port on the charging cradle to the USB port on the
CP960 using a 0.3m micro USB cable.
During charging, the battery LED indicator on the CPW90 illuminates solid
red. When the battery capacity reaches 100%, the battery LED indicator on
the CPW90 will illuminate solid green.
E
N
G
L
I
S
H
1
When you charge the CPW90, the CPW90 will start up automatically.
If you do not charge the CPW90, long tap the mute button on the CPW90
for 3 seconds to turn on the CPW90.
Note: If it is the first time you use the CPW90, you need to fully charge the
CPW90 for normal use.
If the CPW90 is not in use, we recommend you to charge the CPW90
even when the battery is full.
Registering the CPW90 with the CP960 Conference Phone
LED Instruction
If you buy CP960-WirelessMic, the CPW90 is registered with the CP960
conference phone by default. In this situation, you can skip this chapter.
If the CPW90 is not registered with the CP960 conference phone, you
should register the CPW90 with the CP960 conference phone manually. So
that the CPW90 can work as expansion microphone of the CP960
conference phone.
To register the CPW90 with the CP960 conference phone:
1. Do the following on the CP960 conference phone:
Tap ->Wireless Microphone.
Tap to search for a CPW90.
2. Turn on the CPW90.
The CPW90 enters the registration mode automatically. And the mute
indicator LED on the CPW90 fast flashes yellow.
The CPW90 registers with the CP960 conference phone automatically.
If the registration is successful, the mute indicator LED on the CPW90
goes out and the touch screen of CP960 conference phone prompts the
CPW90 information: battery, work time and standby time.
Note: You can connect up to two wireless expansion microphones to a
CP960 conference phone.
There are two indicators on the CPW90. The indicators display the CPW90
work status.
2
E
N
G
L
I
S
H
Mute indicator LED on the CPW90:
Battery indicator LED on the CPW90:
LED Status Description
LED Status Description
Solid green
The phone enters the pre-dialing screen.
Call mute mode is deactivated.
The phone is receiving an incoming call.
Call mute mode is activated.
The CPW90 is in the registration mode.
The phone is searching for the CPW90
which has registered with it.
The CPW90 is in the idle mode.
The CPW90 has registered with the
phone, but the CPW90 is out of range.
The CPW90 has registered with the
phone, but the CP960 is turned off.
Slowly flashing red
Solid red
Fast flashing yellow
Slowly flashing yellow
Flashing red and green
alternately
Solid green for one second
and then off
Solid green for 3 seconds
and then off
Solid green
Solid red
Fast flashing red 3 times
and then off
The CPW90 is turned on.
The CPW90 is in the idle mode.
The CPW90 is fully charged.
The CPW90 is being charged.
The battery capacity is too low to turn
on the CPW90.
Off
3
E
N
G
L
I
S
H
r=3 m
360-degree audio pickup
CPW90 CPW90
CP960 Conference Phone
r=3 m
360-degree audio pickup
Placing the CPW90
Muting or Unmuting the CPW90
LED Status Description
The battery capacity is less than 10%.
If you tap the mute button, the battery
indicator LED on the CPW90 is still off, it
means the CPW90 is turned off.
Slowly flashing red
Off
The CPW90 is a wireless expansion mic which can work as expansion
microphone of the CP960 conference phone. It supports 360-degree audio
pickup at a radius of up to 3 meters. The CPW90 has a rubber pad on its
base to prevent it from sliding. You can place the CPW90 on a conference
table.
Do the following to ensure optimal voice quality:
The CPW90 should be less than 20 meters distant from the CP960
conference phone, and is not disturbed by obstacles.
Place the CPW90 on a stable surface and keep it away from obstacles so
that it can effectively pick up sounds.
When the CPW90 works as an expansion microphone of the CP960
conference phone of the CP960 conference phone and the CP960
conference phone is in a call, you can tap the mute button on the CPW90 to
mute or unmute the CPW90.
4
E
N
G
L
I
S
H
Frequently Asked Questions
1. How to turn off the CPW90?
Long tap the mute button on the CPW90, until the battery indicator LED
on the CPW90 illuminates solid red for 3 seconds and then goes out.
2. How to find the CPW90 which has registered with the CP960
conference phone?
1) Tap ->Wireless Microphone.
2) Select the desired mic, and then tap Find.
The mute indicator LED on the CPW90 flashes red and green
alternately.
3. How to register the CPW90 with another CP960 conference phone?
The CPW90 can only be registered with one CP960 conference phone.
If you want to register the CPW90 to another CP960 conference phone,
the CPW90 will be deregistered from the previous CP960 conference
phone automatically.
To register the CPW90 with another CP960 conference phone:
1) Do the following on another CP960 conference phone:
Tap ->Wireless Microphone.
Tap to search for a CPW90.
2) Put the CPW90 on the charging cradle and make sure it is charging.
3) Long tap the mute button on the CPW90 for 5 seconds.
The CPW90 enters the registration mode. And the mute indicator LED
on the CPW90 fast flashes yellow.
The CPW90 registers with another CP960 conference phone
automatically, and is deregistered from the previous CP960
conference phone.
4. What is the idle mode?
When the CPW90 registers with the CP960 conference phone
successfully, the CPW90 enters the idle mode.
In idle mode, if you tap the mute button on the CPW90, the battery
indicator LED on the CPW90 will illuminate solid green for 3 seconds and
then go out.
5. How to deregister the CPW90 from the CP960 conference phone?
1) Tap ->Wireless Microphone.
2) Select the desired mic, and then tap Detail.
3) Tap Unbind to deregister the CPW90.
Save these instructions. Read these safety instructions before use!
The following basic safety precautions should always be followed to reduce
risk of fire, electrical shock, and other personal injury.
General Requirements
Before you install and use the device, read the safety instructions
carefully and observe the situation during operation.
During the process of storage, transportation, and operation, please
always keep the device dry and clean.
During the process of storage, transportation, and operation, please
avoid collision and crash of the device.
Please attempt not to dismantle the device by yourself. In case of
any discrepancy, please contact the appointed maintenance center
for repair.
Without prior written consent, no organization or individual is
permitted to make any change to the structure or the safety design
of the device. Yealink is under no circumstance liable to
consequences or legal issues caused by such changes.
Please refer to the relevant laws and statutes while using the device.
Legal rights of others should be respected as well.
Environmental Requirements
Place the device at a well-ventilated place. Do not expose the device
under direct sunlight.
Keep the device dry and free of dusts.
Place the device on a stable and level platform.
Please place no heavy objects on the device in case of damage and
deformation caused by the heavy load.
Keep at least 10 cm between the device and the closest object for
heat dissipation.
Do not place the device on or near any inflammable or
fire-vulnerable object, such as rubber-made materials.
Keep the device away from any heat source or bare fire, such as a
candle or an electric heater.
Keep the device away from any household appliance with strong
magnetic field or electromagnetic field, such as a microwave oven or
a refrigerator.
Operating Requirements
Do not let a child operate the device without guidance.
Do not let a child play with the device or any accessory in case of
accidental swallowing.
Please use the accessories provided or authorized by the
manufacturer only.
The power supply of the device shall meet the requirements of the
input voltage of the device. Please use the provided surge
protection power socket only.
Before plugging or unplugging any cable, make sure that your
hands are completely dry.
Do not spill liquid of any kind on the product or use the equipment
near water, for example, near a bathtub, washbowl, kitchen sink,
wet basement or near a swimming pool.
Do not tread on, pull, or over-bend any cable in case of malfunction
of the device.
During a thunderstorm, stop using the device and disconnect it
from the power supply. Unplug the power plug and the Asymmetric
Digital Subscriber Line (ADSL) twisted pair (the radio frequency
cable) to avoid lightning strike.
If the device is left unused for a rather long time, disconnect it from
the power supply and unplug the power plug.
When there is smoke emitted from the device, or some abnormal
noise or smell, disconnect the device from the power supply, and
unplug the power plug immediately. Contact the specified
maintenance center for repair.
Do not insert any object into equipment slots that is not part of the
product or auxiliary product.
Before connecting a cable, connect the grounding cable of the
device first. Do not disconnect the grounding cable until you
disconnect all other cables.
Cleaning Requirements
Before cleaning the device, stop using it and disconnect it from the
power supply.
Use a piece of soft, dry and anti-static cloth to clean the device.
Keep the power plug clean and dry. Using a dirty or wet power plug
may lead to electric shock or other perils.
5
E
N
G
L
I
S
H
Safety Instructions
Save these instructions. Read these safety instructions before use!
The following basic safety precautions should always be followed to reduce
risk of fire, electrical shock, and other personal injury.
General Requirements
Before you install and use the device, read the safety instructions
carefully and observe the situation during operation.
During the process of storage, transportation, and operation, please
always keep the device dry and clean.
During the process of storage, transportation, and operation, please
avoid collision and crash of the device.
Please attempt not to dismantle the device by yourself. In case of
any discrepancy, please contact the appointed maintenance center
for repair.
Without prior written consent, no organization or individual is
permitted to make any change to the structure or the safety design
of the device. Yealink is under no circumstance liable to
consequences or legal issues caused by such changes.
Please refer to the relevant laws and statutes while using the device.
Legal rights of others should be respected as well.
Environmental Requirements
Place the device at a well-ventilated place. Do not expose the device
under direct sunlight.
Keep the device dry and free of dusts.
Place the device on a stable and level platform.
Please place no heavy objects on the device in case of damage and
deformation caused by the heavy load.
Keep at least 10 cm between the device and the closest object for
heat dissipation.
Do not place the device on or near any inflammable or
fire-vulnerable object, such as rubber-made materials.
Keep the device away from any heat source or bare fire, such as a
candle or an electric heater.
Keep the device away from any household appliance with strong
magnetic field or electromagnetic field, such as a microwave oven or
a refrigerator.
Operating Requirements
Do not let a child operate the device without guidance.
Do not let a child play with the device or any accessory in case of
accidental swallowing.
Please use the accessories provided or authorized by the
manufacturer only.
The power supply of the device shall meet the requirements of the
input voltage of the device. Please use the provided surge
protection power socket only.
Before plugging or unplugging any cable, make sure that your
hands are completely dry.
Do not spill liquid of any kind on the product or use the equipment
near water, for example, near a bathtub, washbowl, kitchen sink,
wet basement or near a swimming pool.
Do not tread on, pull, or over-bend any cable in case of malfunction
of the device.
During a thunderstorm, stop using the device and disconnect it
from the power supply. Unplug the power plug and the Asymmetric
Digital Subscriber Line (ADSL) twisted pair (the radio frequency
cable) to avoid lightning strike.
If the device is left unused for a rather long time, disconnect it from
the power supply and unplug the power plug.
When there is smoke emitted from the device, or some abnormal
noise or smell, disconnect the device from the power supply, and
unplug the power plug immediately. Contact the specified
maintenance center for repair.
Do not insert any object into equipment slots that is not part of the
product or auxiliary product.
Before connecting a cable, connect the grounding cable of the
device first. Do not disconnect the grounding cable until you
disconnect all other cables.
Cleaning Requirements
Before cleaning the device, stop using it and disconnect it from the
power supply.
Use a piece of soft, dry and anti-static cloth to clean the device.
Keep the power plug clean and dry. Using a dirty or wet power plug
may lead to electric shock or other perils.
6
E
N
G
L
I
S
H
Save these instructions. Read these safety instructions before use!
The following basic safety precautions should always be followed to reduce
risk of fire, electrical shock, and other personal injury.
General Requirements
Before you install and use the device, read the safety instructions
carefully and observe the situation during operation.
During the process of storage, transportation, and operation, please
always keep the device dry and clean.
During the process of storage, transportation, and operation, please
avoid collision and crash of the device.
Please attempt not to dismantle the device by yourself. In case of
any discrepancy, please contact the appointed maintenance center
for repair.
Without prior written consent, no organization or individual is
permitted to make any change to the structure or the safety design
of the device. Yealink is under no circumstance liable to
consequences or legal issues caused by such changes.
Please refer to the relevant laws and statutes while using the device.
Legal rights of others should be respected as well.
Environmental Requirements
Place the device at a well-ventilated place. Do not expose the device
under direct sunlight.
Keep the device dry and free of dusts.
Place the device on a stable and level platform.
Please place no heavy objects on the device in case of damage and
deformation caused by the heavy load.
Keep at least 10 cm between the device and the closest object for
heat dissipation.
Do not place the device on or near any inflammable or
fire-vulnerable object, such as rubber-made materials.
Keep the device away from any heat source or bare fire, such as a
candle or an electric heater.
Keep the device away from any household appliance with strong
magnetic field or electromagnetic field, such as a microwave oven or
a refrigerator.
Operating Requirements
Do not let a child operate the device without guidance.
Do not let a child play with the device or any accessory in case of
accidental swallowing.
Please use the accessories provided or authorized by the
manufacturer only.
The power supply of the device shall meet the requirements of the
input voltage of the device. Please use the provided surge
protection power socket only.
Before plugging or unplugging any cable, make sure that your
hands are completely dry.
Do not spill liquid of any kind on the product or use the equipment
near water, for example, near a bathtub, washbowl, kitchen sink,
wet basement or near a swimming pool.
Do not tread on, pull, or over-bend any cable in case of malfunction
of the device.
During a thunderstorm, stop using the device and disconnect it
from the power supply. Unplug the power plug and the Asymmetric
Digital Subscriber Line (ADSL) twisted pair (the radio frequency
cable) to avoid lightning strike.
If the device is left unused for a rather long time, disconnect it from
the power supply and unplug the power plug.
When there is smoke emitted from the device, or some abnormal
noise or smell, disconnect the device from the power supply, and
unplug the power plug immediately. Contact the specified
maintenance center for repair.
Do not insert any object into equipment slots that is not part of the
product or auxiliary product.
Before connecting a cable, connect the grounding cable of the
device first. Do not disconnect the grounding cable until you
disconnect all other cables.
Cleaning Requirements
Before cleaning the device, stop using it and disconnect it from the
power supply.
Use a piece of soft, dry and anti-static cloth to clean the device.
Keep the power plug clean and dry. Using a dirty or wet power plug
may lead to electric shock or other perils.
7
E
N
G
L
I
S
H
Save these instructions. Read these safety instructions before use!
The following basic safety precautions should always be followed to reduce
risk of fire, electrical shock, and other personal injury.
General Requirements
Before you install and use the device, read the safety instructions
carefully and observe the situation during operation.
During the process of storage, transportation, and operation, please
always keep the device dry and clean.
During the process of storage, transportation, and operation, please
avoid collision and crash of the device.
Please attempt not to dismantle the device by yourself. In case of
any discrepancy, please contact the appointed maintenance center
for repair.
Without prior written consent, no organization or individual is
permitted to make any change to the structure or the safety design
of the device. Yealink is under no circumstance liable to
consequences or legal issues caused by such changes.
Please refer to the relevant laws and statutes while using the device.
Legal rights of others should be respected as well.
Environmental Requirements
Place the device at a well-ventilated place. Do not expose the device
under direct sunlight.
Keep the device dry and free of dusts.
Place the device on a stable and level platform.
Please place no heavy objects on the device in case of damage and
deformation caused by the heavy load.
Keep at least 10 cm between the device and the closest object for
heat dissipation.
Do not place the device on or near any inflammable or
fire-vulnerable object, such as rubber-made materials.
Keep the device away from any heat source or bare fire, such as a
candle or an electric heater.
Keep the device away from any household appliance with strong
magnetic field or electromagnetic field, such as a microwave oven or
a refrigerator.
Operating Requirements
Do not let a child operate the device without guidance.
Do not let a child play with the device or any accessory in case of
accidental swallowing.
Please use the accessories provided or authorized by the
manufacturer only.
The power supply of the device shall meet the requirements of the
input voltage of the device. Please use the provided surge
protection power socket only.
Before plugging or unplugging any cable, make sure that your
hands are completely dry.
Do not spill liquid of any kind on the product or use the equipment
near water, for example, near a bathtub, washbowl, kitchen sink,
wet basement or near a swimming pool.
Do not tread on, pull, or over-bend any cable in case of malfunction
of the device.
During a thunderstorm, stop using the device and disconnect it
from the power supply. Unplug the power plug and the Asymmetric
Digital Subscriber Line (ADSL) twisted pair (the radio frequency
cable) to avoid lightning strike.
If the device is left unused for a rather long time, disconnect it from
the power supply and unplug the power plug.
When there is smoke emitted from the device, or some abnormal
noise or smell, disconnect the device from the power supply, and
unplug the power plug immediately. Contact the specified
maintenance center for repair.
Do not insert any object into equipment slots that is not part of the
product or auxiliary product.
Before connecting a cable, connect the grounding cable of the
device first. Do not disconnect the grounding cable until you
disconnect all other cables.
Cleaning Requirements
Before cleaning the device, stop using it and disconnect it from the
power supply.
Use a piece of soft, dry and anti-static cloth to clean the device.
Keep the power plug clean and dry. Using a dirty or wet power plug
may lead to electric shock or other perils.
ENVIRONMENTAL RECYCLING
Never dispose of the device with domestic waste
Ask your Town Council about how to dispose of it in an
environmentally friendly way. The cardboard box, plastic
packaging and player components may be recycled in
accordance with prevailing recycling regulations in your
country.
Always adhere to prevailing regulations
Those who fail to do so may be fined or prosecuted in
accordance with the law. The crossed out garbage can that
appears on the device means that when it has reached the end
of its useful life, it should be taken to a special waste disposal
centre and treated separately to general urban waste.
Addr: 309, 3th Floor, No.16, Yun Ding North Road,
Huli District, Xiamen City, Fujian, P.R. China
Tel: +86-592-5702000
Fax: +86-592-5702455
8
E
N
G
L
I
S
H
YEALINK (XIAMEN) NETWORK TECHNOLOGY CO.,LTD
WWW.YEALINK.COM
Declaration of Conformity
We,
YEALINK (XIAMEN) NETWORK TECHNOLOGY CO.,LTD
Address: 309, 3th Floor, No.16, Yun Ding North Road,
Huli District, Xiamen City, Fujian, P.R. China
CE DATE: 14th/Jane/2017
declare that the product
Type: CP Wireless Expansion Mic
Model: CPW90 (DECT: 1880-1900MHz)
meets the essential requirements and other relevant provisions according to the
following EC directive
Directive: 2014/30/EU, 2014/35/EU, RED 2014/53/EU;
The presumption of conformity with the essential requirement is ensure according to:
Article 3.1 a : (protection of the health &the safety of the user)
Safety: EN 60950-1:2006+A11:2009+A1:2010+A12:2011+ A2:2013
SAR: ETSI EN 62311:2008
Article 3.1 b : (protection requirement with respect to electromagnetic compatibility)
EMC: EN55032:2012/AC:2013, EN55024:2010,
EN301489-6 V2.1.1, EN301489-1 V2.1.1
Article 3.2 (effective use of the radio spectrum)
Radio: ETSI EN 301406 V2.2.2
Directive 2011/65/EU of the European Parliament and of the Council of 8 June
2011 on the restriction of the use of certain hazardous substances in electrical and
electronic equipment (RoHS)
Directive 2012/19/EU of the European Parliament and of the Council of 24 July,
2012 on Waste electrical and electronic equipment (WEEE)
Regulation (EC) No.1907/2006 of the European Parliament and of the Council of
18. December. 2006 on Registration, Evaluation, Authorization, and Restriction of
Chemicals (REACH)
Addr: 309, 3th Floor, No.16, Yun Ding North Road,
Huli District, Xiamen City, Fujian, P.R. China
Tel: +86-592-5702000
Fax: +86-592-5702455
9
YEALINK (EUROPE) NETWORK TECHNOLOGY B.V.
Address: Strawinskylaan 3127, Atrium Building, 8th oor,
1077ZX Amsterdam, the Netherlands
Telephone: +31(0)646111373
About Yealink
Yealink (Stock Code: 300628) is a global leading unified communication (UC) terminal solution provider
that primarily offers video conferencing systems and voice communication solutions. Founded in 2001,
Yealink leverages its independent research and development and innovation to pursue its core mission:
“Easy collaboration, high productivity.” The company’s high-quality UC terminal solutions enhance the
work efficiency and competitive advantages of its customers in over 100 countries. Yealink is the world’s
second-largest SIP phone provider and is number one in the China market.
Technical Support
Visit Yealink WIKI (http://support.yealink.com/) for the latest firmware, guides, FAQ, Product documents, and more.
For better service, we sincerely recommend you to use Yealink Ticketing system (https://ticket.yealink.com) to
submit all your technical issues.
YEALINK(XIAMEN) NETWORK TECHNOLOGY CO.,LTD.
Web: www.yealink.com
Addr: 309, 3th Floor, No.16, Yun Ding North Road,
Huli District, Xiamen City, Fujian, P.R. China
Copyright © 2017 Yealink Inc. All rights reserved.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44

Yealink CPW90 V1.1 DE ES FR Quick start guide

Type
Quick start guide
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI