Tripp Lite Power Distribution Units Owner's manual

Type
Owner's manual

Tripp Lite Power Distribution Units

Tripp Lite Power Distribution Units provide convenient multiple outlets for powering your electronic devices. They are designed for indoor use in a controlled environment and feature a circuit breaker to protect against overloads. Tripp Lite Power Distribution Units are ideal for use in offices, data centers, and other commercial applications.

Features:

  • Multiple outlets for powering electronic devices
  • Circuit breaker to protect against overloads
  • Grounding lug for added safety
  • Compact design for easy installation
  • Durable construction for long-lasting performance

Tripp Lite Power Distribution Units

Tripp Lite Power Distribution Units provide convenient multiple outlets for powering your electronic devices. They are designed for indoor use in a controlled environment and feature a circuit breaker to protect against overloads. Tripp Lite Power Distribution Units are ideal for use in offices, data centers, and other commercial applications.

Features:

  • Multiple outlets for powering electronic devices
  • Circuit breaker to protect against overloads
  • Grounding lug for added safety
  • Compact design for easy installation
  • Durable construction for long-lasting performance
Owner’s Manual
1
1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support
Power Distribution Unit (PDU)
Español 5
Français 9
Important Warnings
• ThePDUprovidesconvenientmultipleoutletsbutitDOESNOTprovidesurgeorlinenoise
protectionforconnectedequipment.
• ThePDUisdesignedforindooruseonlyinacontrolledenvironmentawayfromexcessmoisture,
temperatureextremes,conductivecontaminants,dustordirectsunlight.
• Useofthisequipmentinlifesupportapplicationswherefailureofthisequipmentcanreasonablybe
expectedtocausethefailureofthelifesupportequipmentortosignificantlyaffectitssafetyor
effectivenessisnotrecommended.Donotusethisequipmentinthepresenceofaflammable
anestheticmixturewithair,oxygenornitrousoxide.
• DonotconnectthePDUtoanungroundedoutletorextensioncordsoradaptersthateliminatethe
connectiontoground.
• ThepowerrequirementforeachpieceofequipmentconnectedtothePDUmustnotexceedthe
individualoutlet'sloadrating.
• ThetotalpowerrequirementforequipmentconnectedtothePDUmustnotexceedthemaximum
loadratingforthePDU.
• DonotdrillintoorattempttoopenanypartofthePDUhousing.Therearenouser-serviceableparts
inside.
• DonotattempttomodifythePDU,includingtheinputplugsandpowercables.
• DonotattempttousethePDUifanypartofitbecomesdamaged.
• DonotattempttomountthePDUtoaninsecureorunstablesurface.
• Neverattempttoinstallelectricalequipmentduringathunderstorm.
Important Safety Instructions
SAVE THESE INSTRUCTIONS
This manual contains instructions and warnings that should be followed
during the installation and operation of this product. Failure to heed these
warnings may affect your warranty.
©2014TrippLite.Allrightsreserved.
14-02-327-932782.indb 1 3/25/2014 2:19:14 PM
1A
1A
1B
Toolless mounting
buttons at the side
of the PDU.
Toolless mounting
buttons at the rear
of the PDU.
2
Installation
Note: Regardless of installation configuration, the user must determine the fitness of hardware and
procedures before mounting. The PDU and included hardware are designed for common rack and rack
enclosure types and may not be appropriate for all applications. Exact mounting configurations may
vary.
1
Mount the PDU.
Option A: Vertical (0U) Rack Mounting with
Toolless Mounting Buttons
InsertthePDU’stoollessmountingbuttonsinto
therack’stoollessmountingslotsandslidethe
PDUdownwardtolockitintoplace.Youcan
eitherusethetoollessmountingbuttonsattherear
ofthePDUoratthesideofthePDU,depending
onthedesiredorientationoftheoutlets.Note: If
you need toolless mounting buttons on the side,
use a screwdriver to remove the toolless mounting
buttons and reattach them on the side.
Option B: Surface Mounting with Standard
Brackets
MountthePDUtoawallorunderacounterby
insertingfouruser-suppliedscrewsthroughthe
bracketsandintoappropriatemountingholes.
Makesurethemountingsurfaceandscrewsare
capableofsupportingthecombinedweightofthe
PDUandanyattachedequipmentcords.Note: If
you need to change the orientation of the PDU,
use a screwdriver to remove the mounting
brackets, rotate them in 90° increments as
required and reattach them before mounting. If
the toolless mounting buttons obstruct the planned
mounting orientation, use a screwdriver to remove
them and retain them for future use.
2
Connect the PDU to a
grounded outlet.
Inserttheplugdirectlyintoaproperlygrounded
ACoutlet.
3
Connect Equipment to the PDU.
Becarefulnottoexceedtheloadratingforeach
outletnorthetotalloadratingforthePDU.
14-02-327-932782.indb 2 3/25/2014 2:19:14 PM
3
Circuit Breaker:IfthecurrentdrawnbytheequipmentconnectedtothePDU
exceedstheMaximumLoadRating,thecircuitbreakerwilltriptopreventpossible
damage.Whenthecircuitbreakertrips,itsplungerwillpopup.Disconnectexcess
equipmentandallowthebreakertocoolatleastoneminutebeforedepressingthe
plungertoresetthebreaker.
Grounding Lug: UsethisscrewtoconnectthePDUtoground.
Features
Service
YourTrippLiteproductiscoveredbythewarrantydescribedinthismanual.AvarietyofExtended
WarrantyandOn-SiteServiceProgramsarealsoavailablefromTrippLite.Formoreinformationon
service,visitwww.tripplite.com/support.Beforereturningyourproductforservice,followthesesteps:
1.Reviewtheinstallationandoperationproceduresinthismanualtoinsurethattheserviceproblem
doesnotoriginatefromamisreadingoftheinstructions.
2.Iftheproblemcontinues,donotcontactorreturntheproducttothedealer.Instead,visit
www.tripplite.com/support.
3.Iftheproblemrequiresservice,visitwww.tripplite.com/supportandclicktheProductReturnslink.
FromhereyoucanrequestaReturnedMaterialAuthorization(RMA)number,whichisrequiredfor
service.Thissimpleon-lineformwillaskforyourunit’smodelandserialnumbers,alongwithother
generalpurchaserinformation.TheRMAnumber,alongwithshippinginstructionswillbeemailedto
you.Anydamages(direct,indirect,specialorconsequential)totheproductincurredduringshipment
toTrippLiteoranauthorizedTrippLiteservicecenterisnotcoveredunderwarranty.Products
shippedtoTrippLiteoranauthorizedTrippLiteservicecentermusthavetransportationcharges
prepaid.MarktheRMAnumberontheoutsideofthepackage.Iftheproductiswithinitswarranty
period,encloseacopyofyoursalesreceipt.Returntheproductforserviceusinganinsuredcarrierto
theaddressgiventoyouwhenyourequesttheRMA.
14-02-327-932782.indb 3 3/25/2014 2:19:14 PM
4
Warranty & Warranty Registration
LIMITED WARRANTY
Seller warrants this product, if used in accordance with all applicable instructions, to be free from original
defects in material and workmanship for a period of 5 years (except internal UPS system batteries outside
USA and Canada, 1 year) from the date of initial purchase. If the product should prove defective in material
or workmanship within that period, Seller will repair or replace the product, in its sole discretion. Service
under this Warranty can only be obtained by your delivering or shipping the product (with all shipping or
delivery charges prepaid) to: Tripp Lite, 1111 W. 35th Street, Chicago, IL 60609 USA. Seller will pay return
shipping charges. Visit www.tripplite.com/support before sending any equipment back for repair.
THIS WARRANTY DOES NOT APPLY TO NORMAL WEAR OR TO DAMAGE RESULTING FROM
ACCIDENT, MISUSE, ABUSE OR NEGLECT. SELLER MAKES NO EXPRESS WARRANTIES OTHER
THAN THE WARRANTY EXPRESSLY SET FORTH HEREIN. EXCEPT TO THE EXTENT PROHIBITED BY
APPLICABLE LAW, ALL IMPLIED WARRANTIES, INCLUDING ALL WARRANTIES OF
MERCHANTABILITY OR FITNESS, ARE LIMITED IN DURATION TO THE WARRANTY PERIOD SET
FORTH ABOVE; THIS WARRANTY EXPRESSLY EXCLUDES ALL INCIDENTAL AND CONSEQUENTIAL
DAMAGES. (Some states do not allow limitations on how long an implied warranty lasts, and some states
do not allow the exclusion or limitation of incidental or consequential damages, so the above limitations or
exclusions may not apply to you. This Warranty gives you specific legal rights, and you may have other
rights which vary from jurisdiction to jurisdiction).
WARNING: The individual user should take care to determine prior to use whether this device is suitable,
adequate or safe for the use intended. Since individual applications are subject to great variation, the
manufacturer makes no representation or warranty as to the suitability or fitness of these devices for any
specific application.
WARRANTY REGISTRATION
Visit www.tripplite.com/warranty today to register the warranty for your new Tripp Lite product. You'll be
automatically entered into a drawing for a chance to win a FREE Tripp Lite product!*
* No purchase necessary. Void where prohibited. Some restrictions apply. See website for details.
Regulatory Compliance Identification Numbers
For the purpose of regulatory compliance certifications and identification, your Tripp Lite product has been
assigned a unique series number. The series number can be found on the product nameplate label, along
with all required approval markings and information. When requesting compliance information for this
product, always refer to the series number. The series number should not be confused with the marking
name or model number of the product.
The policy of Tripp Lite is one of continuous improvement. Specifications are subject to change without
notice.
1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support
14-02-327-932782.indb 4 3/25/2014 2:19:15 PM
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12

Tripp Lite Power Distribution Units Owner's manual

Type
Owner's manual

Tripp Lite Power Distribution Units

Tripp Lite Power Distribution Units provide convenient multiple outlets for powering your electronic devices. They are designed for indoor use in a controlled environment and feature a circuit breaker to protect against overloads. Tripp Lite Power Distribution Units are ideal for use in offices, data centers, and other commercial applications.

Features:

  • Multiple outlets for powering electronic devices
  • Circuit breaker to protect against overloads
  • Grounding lug for added safety
  • Compact design for easy installation
  • Durable construction for long-lasting performance

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI