3M 3M-Matic™ Adjustable Case Sealer Stainless Steel 700a-s AccuGlide™ 2 Taping Head, 1 per crate Operating instructions

3M
Brand
3M
Model
3M-Matic™ Adjustable Case Sealer Stainless Steel 700a-s AccuGlide™ 2 Taping Head, 1 per crate
Type
Operating instructions

This manual is also suitable for

3M 3M-Matic™ Adjustable Case Sealer Stainless Steel 700a-s AccuGlide™ 2 Taping Head, 1 per crate comes with a range of impressive features to transform your packaging operation. Here's a closer look at its capabilities:

Features

  • Ideal for applying tape to cases quickly and securely
  • Compatible with a wide range of 3M tapes, providing versatility for different packaging needs
  • Adjustable settings allow for precise tape application, ensuring a professional finish
  • Durable stainless steel construction ensures longevity and resistance to wear and tear

Benefits

  • Enhanced productivity: Streamlines your packaging process, saving time and effort

3M 3M-Matic™ Adjustable Case Sealer Stainless Steel 700a-s AccuGlide™ 2 Taping Head, 1 per crate comes with a range of impressive features to transform your packaging operation. Here's a closer look at its capabilities:

Features

  • Ideal for applying tape to cases quickly and securely
  • Compatible with a wide range of 3M tapes, providing versatility for different packaging needs
  • Adjustable settings allow for precise tape application, ensuring a professional finish
  • Durable stainless steel construction ensures longevity and resistance to wear and tear

Benefits

  • Enhanced productivity: Streamlines your packaging process, saving time and effort
Features:
• Low Cost: List price of $275 as a kit or
$435 factory installed
• Simple to install
• Works on any AccuGlide II series taping
head.
• Works on every 3M-Matic™ Case sealer
• Displays 6 digits
• Push button reset to zero
• Non-contact sensing provides years of
operation without mechanical wear
Uses:
• Keep track of your productivity.
• Know how many cases you are
processing.
• Know when to perform preventa-
tive maintenance on your case
sealer.
Features continued:
• Battery powered by 2 replaceable
N cells, with a nominal life of 4
years.
• Operating temperature range of -
22ºF to 167ºF
• Quick disconnects for easy re-
moval
Step 8:
Install the Counter assem-
bly on top of the tape head
guard. Use the screws that
originally held the guard in
place. The wires from the
sensor assembly fit in the
gap on the guards side.
Step 4:
Install the Sensor Assembly onto the rear tape
head spacer. Use the M5x12 hex head screw
along with the M5 split washer and M5 flat
washer to secure the assembly into the middle
hole of the spacer. The sensor assembly should
be mounted on the inside of the tape head.
Step 2:
Remove the (4) Philips
head screws that fasten
the tape head guard, and
retain them for re-
assembly.
Kit Contents:
1 ea. Counter Assembly
1 ea. Sensor Assembly
1 ea. 1/4” Diameter Magnet
1 ea. M5x12 Hex Head Screw
1 ea. M5 Split Washer
1 ea. M5 Flat Washer
Tools Required:
Phillips Screw Driver
8mm Nut Driver
Step 5:
Install the magnet on the apply-
ing mechanism spacer. Pull the
applying mechanism spacer to-
wards the sensor and check the
alignment of the magnet. The
magnet should be to either side
of the sensor, it won’t function
in the center of the sensor.
Step 6:
Route the sensor wires over
the top of the bracket and un-
der the tape head spacer.
Step 7:
Replace the tape head
guard, and hand tighten the
front (2) screws.
Step 9:
Press the quick disconnect
terminals together. It does-
n’t matter which wire is
connected to which termi-
nal, there is no polarity to
match.
Step 10:
Press the grey reset
button to return the
count to zero. This
completes the in-
stallation of the
Throughput indica-
tor.
Step 3:
Remove the guard and retain for re-
assembly.
Step 1: Turn off and lock out any source of power supply (electrical, pneumatic or other) before installing this kit or performing any
adjustments.
  • Page 1 1
  • Page 2 2

3M 3M-Matic™ Adjustable Case Sealer Stainless Steel 700a-s AccuGlide™ 2 Taping Head, 1 per crate Operating instructions

3M
Brand
3M
Model
3M-Matic™ Adjustable Case Sealer Stainless Steel 700a-s AccuGlide™ 2 Taping Head, 1 per crate
Type
Operating instructions
This manual is also suitable for

3M 3M-Matic™ Adjustable Case Sealer Stainless Steel 700a-s AccuGlide™ 2 Taping Head, 1 per crate comes with a range of impressive features to transform your packaging operation. Here's a closer look at its capabilities:

Features

  • Ideal for applying tape to cases quickly and securely
  • Compatible with a wide range of 3M tapes, providing versatility for different packaging needs
  • Adjustable settings allow for precise tape application, ensuring a professional finish
  • Durable stainless steel construction ensures longevity and resistance to wear and tear

Benefits

  • Enhanced productivity: Streamlines your packaging process, saving time and effort
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents