2. Home
  3. Domestic appliances
  4. Floor care
  5. Vacuum cleaners
  6. Shark
  7. HV345

Shark HV345 Quick start guide

  • Hello! I am an AI chatbot trained to assist you with the Shark HV345 Quick start guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
  • What's included with the Shark HV345 Corded Ultra-Light Vacuum?
    How can I assemble the Shark HV345 vacuum?
    How do I empty the dust cup on the Shark HV345?
    How do I maintain the brushroll on the Shark HV345?
    What are the different settings on the Shark HV345?
    How do I use the Shark HV345 in above-floor mode?
Please be sure to read the enclosed Shark® Owner’s Guide prior to using your vacuum.
A
Handheld Vacuum
B
Zero•M™ Cleaner Head
C
Wand
D
5˝ Crevice Tool
E
Pet Multi-Tool
F
Flexible Hose
G
OnBoard Clip
H
Wall Mount
WHAT’S INSIDE
HV345_QSG_MP_180622
D E F
QUICK START GUIDE
Corded Ultra-Light Vacuum
H
Rocket
®
CLEANER HEAD
™
G
STORAGE
MAINTENANCE
Brushroll Maintenance
The Zero•M Cleaner Head delivers powerful Shark suction
performance while actively removing hair from the
brushroll while in use.
Dust Cup
Empty dust cup every time debris reaches the MAX fill line.
Hang the handheld vacuum
on the hook on the bottom
of the wand, and wrap the
power cord around the
cord hooks.
Please see included
instruction sheet for
wall mount installation
information.
Onboard Hook Wall Mount
Empty
Dust Cup
Release
1. Using a coin, turn the locks on the bottom of the
cleaner head counterclockwise to open, then lift o
cover to access Brushroll.
2. Check airway for blockages.
3. Replace cover, pressing down firmly on all sides before
turning the locks clockwise to close.
ASSE MBLY
(Click)
(Click)
1 2
A
B
C
SETTING II
VERSATILE FLOOR-TO-CEILING CLEANING
For questions or to register your product, visit us online at sharkclean.com
NOTE: For deep cleaning per ASTM F 608 (embedded dirt in
carpets) please use setting II, Carpets.
OFF
SETTING I
Slide the Power switch to the appropriate speed setting.
To clean floors, place foot on cleaner head and tilt handheld
vacuum back.
Bare Floor/Small Area Rugs
The brushroll spins slowly to clean bare floors and
delicate arearugs.
Carpets
The brushroll spins faster to pick up debris below the
surface ofyour carpets.
Settings
Above-Floor Mode
Upright Mode
NOTE: All accessories are compatible with both the wand and the
handheld vacuum. Use Setting I for all above-floor accessories.
Press the WAND RELEASE button and lift the handheld
vacuum o the wand.
Stand the vacuum upright. Step on the foot pedal and
pull the wand up to disconnect it from the cleaner head.
WAND
ABOVE-FLOOR HANDHELD
ABOVE-FLOOR WITH WAND
/