3M Hookit™ Purple Clean Sanding Abrasive Disc 334U User guide

Type
User guide

This manual is also suitable for

3M Hookit™ Purple Clean Sanding Abrasive Disc 334U is designed to help you achieve a smooth, refined finish on your projects. Engineered with premium ceramic mineral, this disc delivers exceptional cutting performance and long-lasting durability, making it ideal for sanding tasks on various surfaces. The unique design minimizes loading, reducing the need for frequent disc changes and enhancing productivity. Whether you're working on metal, wood, or composite materials, this disc ensures consistent results and a professional-quality finish.

3M Hookit™ Purple Clean Sanding Abrasive Disc 334U is designed to help you achieve a smooth, refined finish on your projects. Engineered with premium ceramic mineral, this disc delivers exceptional cutting performance and long-lasting durability, making it ideal for sanding tasks on various surfaces. The unique design minimizes loading, reducing the need for frequent disc changes and enhancing productivity. Whether you're working on metal, wood, or composite materials, this disc ensures consistent results and a professional-quality finish.

Always follow OEM procedures | For ordering information, contact your 3M Sales Representative
34
Standard Operating Procedures
Product List
3M
Dry Guide Coat,
50 gram applicator kit,
PN 05861
Festool D150 Thin
Interface Pad, PN 30092
3M
Hookit
Purple Clean
Sanding Disc 334U,
6 in., grade P600, PN 30761;
6 in., grade P800, PN 30760
Paint Prep
3M
Cubitron
II Hookit
Clean Sanding Abrasive Disc,
6 in., grade 180+, PN 31374;
6 in., grade 320+, PN 31483;
6 in., grade 400+, PN 31484
3M
Cubitron
II Hookit
Clean Sanding Sheet Roll,
70mm x 12m, grade 320+,
PN 34449
3M
Accuspray
ONE
Pro Spray Gun Kit for
3M
PPS
2.0, PN 26578
Feather-Prime-Block Waterborne
1
Featheredge
Blow off repair area. Featheredge the surrounding
repair area using grade 180 abrasive.
2
Final Sand and Inspect
Final sand surrounding area using grade 320
abrasive disc on a DA sander. Blow off, with clean,
dry air. Clean with wax and grease remover. Inspect
the repair for quality.
3
Mask for Primer
Mask repair area as necessary. Refer to Primer
Masking SOP for 3M specific recommendations.
4
Apply Primer
Apply primer to repair area following manufacturer’s
recommendations. Allow to cure.
5
Apply Dry Guide Coat
Apply 3M
Dry Guide Coat over cured primer.
6
Hand Block Repair
Hand sand or “check block” sand the repair area
using a grade 320 abrasive sheet on an appropriately
sized hand block. Look for imperfections in the repair
area highlighted by the dry guide coat. If necessary,
re-apply dry guide coat and continue block sanding
to repair any defects as required.
7
Re-Apply Dry Guide Coat
Re-apply 3M
Dry Guide Coat over entire
repair area.
8
DA Sand Primer
DA sand repair area using a grade 400 disc and
a soft interface pad until all 3M
Dry Guide Coat
is removed.
9
Re-Apply Dry Guide Coat
Re-apply 3M
Dry Guide Coat over hand blocked
repair area.
10
DA Sand Primer
DA Sand repair area using a grade 600–800 disc
and a soft interface pad until all the 3M
Dry Guide
Coat is removed.
11
Clean the Damaged Area
Clean the repair area with a VOC compliant
surface cleaner.
Visit 3MCollision.com for more SOPs and videos
Think About Your Health
3M
E-A-R
Skull Screws
Ear Plug, PN P1300
3M
Virtua
Protective
Eyewear, PN 11326
3M
Half Facepiece
Respirator, PN 07182
Individual Product Instruction and Safety Information
For individual product instructions and applicable precautions see product labels
and associated literature for the individual product at 3MCollision.com
For product material safety data sheets see 3MCollision.com
3M, Accuspray, Cubitron, E-A-R, Hookit, Perfect-It, Platinum, PPS, Roloc, Scotch, Scotchblok,
Scotch-Brite, Skull Screws, SUN GUN, Trizact, Versao and Virtua are trademarks of 3M.
All other trademarks are property of their respective owners.
Please recycle. Printed in U.S.A. © 3M 2019. All rights reserved. Rev 7/19. 60-4402-8049-7
3M Automotive Aftermarket Division
3M Center, Building 223-6S-07
St. Paul, MN 55144-1000
U.S.A.
Web 3MCollision.com
Technical Information: The technical information, guidance, and other statements contained in this document or otherwise provided by
3M are based upon records, tests, or experience that 3M believes to be reliable, but the accuracy, completeness, and representative nature
of such information is not guaranteed. Such information is intended for people with knowledge and technical skills sucient to assess and apply
their own informed judgment to the information. No license under any 3M or third party intellectual property rights is granted or implied with
this information.
Product Selection and Use: Many factors beyond 3M’s control and uniquely within user’s knowledge and control can aect the use and
performance of a 3M product in a particular application. As a result, customer is solely responsible for evaluating the product and determining
whether it is appropriate and suitable for customer’s application, including conducting a workplace hazard assessment and reviewing all
applicable regulations and standards (e.g., OSHA, ANSI, etc.). Failure to properly evaluate, select, and use a 3M product and appropriate safety
products, or to meet all applicable safety regulations, may result in injury, sickness, death, and/or harm to property.
Warranty, Limited Remedy, and Disclaimer: Unless a dierent warranty is specically stated on the applicable 3M product packaging or
product literature (in which case such warranty governs), 3M warrants that each 3M product meets the applicable 3M product specication
at the time 3M ships the product. 3M MAKES NO OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, INCLUDING, BUT NOT
LIMITED TO, ANY IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR ARISING OUT
OF A COURSE OF DEALING, CUSTOM, OR USAGE OF TRADE. If a 3M product does not conform to this warranty, then the sole and exclusive
remedy is, at 3M’s option, replacement of the 3M product or refund of the purchase price.
Limitation of Liability: Except for the limited remedy stated above, and except to the extent prohibited by law, 3M will not be liable for any loss
or damage arising from or related to the 3M product, whether direct, indirect, special, incidental, or consequential (including, but not limited
to, lost prots or business opportunity), regardless of the legal or equitable theory asserted, including, but not limited to, warranty, contract,
negligence, or strict liability.
  • Page 1 1
  • Page 2 2

3M Hookit™ Purple Clean Sanding Abrasive Disc 334U User guide

Type
User guide
This manual is also suitable for

3M Hookit™ Purple Clean Sanding Abrasive Disc 334U is designed to help you achieve a smooth, refined finish on your projects. Engineered with premium ceramic mineral, this disc delivers exceptional cutting performance and long-lasting durability, making it ideal for sanding tasks on various surfaces. The unique design minimizes loading, reducing the need for frequent disc changes and enhancing productivity. Whether you're working on metal, wood, or composite materials, this disc ensures consistent results and a professional-quality finish.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI