ZTE MF667 User manual

Type
User manual

ZTE MF667 is a versatile USB modem that supports HSPA+/HSUPA/HSDPA/EDGE/GPRS/GSM networks. With speeds of up to 21.6 Mbps, it offers fast and reliable internet connectivity for laptops and desktop PCs. It also allows you to send and receive SMS messages, manage applications, and expand storage with a microSD card up to 32GB. Whether you're at home, in the office, or on the go, the ZTE MF667 provides a convenient and efficient way to stay connected.

ZTE MF667 is a versatile USB modem that supports HSPA+/HSUPA/HSDPA/EDGE/GPRS/GSM networks. With speeds of up to 21.6 Mbps, it offers fast and reliable internet connectivity for laptops and desktop PCs. It also allows you to send and receive SMS messages, manage applications, and expand storage with a microSD card up to 32GB. Whether you're at home, in the office, or on the go, the ZTE MF667 provides a convenient and efficient way to stay connected.

Introduction
The ZTE MF667 USB modem is a multi-mode USB modem, working in HSPA+/HSUPA/HSDPA/WCDMA/EDGE/
GPRS/GSM networks. With USB interface connecting to a laptop or a desktop PC, it integrates the functionality
of a modem and a mobile phone (SMS), and combines mobile communication with Internet perfectly. It supports
data and SMS services through the mobile phone network, enabling you to communicate anytime and any-
where.
Specication
The following table shows the specication of your device.
Interface type USB 2.0 HIGH SPEED
Systems supported Supports most types of laptop and desktop PC.
Operating systems
supported
Windows XP (SP3 and above), Vista, Windows 7
MAC 10.5 and later
Linux
Functions SMS service, Data service, Applications management, support microSD card, etc.
Network standards HSPA+/HSUPA/HSDPA/EDGE/GPRS/GSM
Transmission speed
(Max)
HSPA+: 21.6 Mbps DL
HSUPA: 5.76 Mbps UL
Temperature
Storage: -20 °C ~ +70 °C
Operation:-10 °C ~ +60 °C
Dimension 76.5 mm * 27.2 mm * 10.5 mm (Without USB Cap)
Weight About 22 g
microSD capability Support up to 32 GB microSD card
Notes:
The microSD Logo (
) is a trademark of SD Card Association.
2. Insert the SIM/USIM card into the SIM/USIM card slot.
Insert the SIM/USIM card with the metal contact area facing downwards into the slot, and then push SIM/USIM
card as far as possible, shown as the following picture.
3. Insert the microSD card into the microSD card slot.
Notes: This modem only supports microSD card.
Insert your microSD card into the microSD card slot, shown as the following picture.
USB Modem
Quick Guide
MF667
1. microSD card slot
2. SIM/USIM card slot
3. USB Connector
4. Modem Cap
5. Front Cover
4. Put the front cover atly upon the body of modem and push the front cover to lock
the cover in its place.
5. Connect the Modem to your laptop or desktop PC.

Plug the USB connector into your computer’s USB port and make sure that it is
tightly inserted.

The OS automatically detects and recognizes new hardware and starts the installation wizard.
Software Installation Guide
On different operating systems, the installation procedures may be difference. Follow the system prompts during
operation.
Getting to know your device
The following gure shows the appearance of the MF667. It is only for your reference. The actual product may
be different.
LEGAL INFORMATION
Copyright © 2012 ZTE CORPORATION.
All rights reserved.
No part of this publication may be excerpted, reproduced, translated or utilized in any form or by any means,
electronic or mechanical, including photocopying and microlm, without the prior written permission of ZTE Cor-
poration.
The manual is published by ZTE Corporation. We reserve the right to make modications on print errors or up-
date specications without prior notice.
Version No. : R1.0
Edition Time : 2012.03
Manual No. : 079584504338
Hardware Installation
1. Press and push the front cover and remove it.
Notes: Do not open the front cover rudely so as to avoid the damage of the front cover.
For Windows OS
Your system will start the software setup process automatically when you connect the modem to your computer
correctly. Follow the system prompts to complete the software installation. After the installation, There will be a
shortcut icon
on the desktop.
Notes:
If the system does not launch installation automatically, you can run the installation program in path of My Com-
puter > AIRTEL MODEM.
For Mac OS
The system will automatically display a CD-ROM icon on the desktop, when you connect the modem to your
computer correctly. Double click the installation software package in the CD-ROM, and follow the system
prompts to complete the software installation.
Safe removal from your system
Please close the application software, and then you can pull out the USB Modem safely.
How to use your modem
Various icons are presented to enable quick operation of the following functions:
Connection Connect to the Internet.
Statistic Show the data statistics.
Text Read or send the text message.
Phonebook Save or read the contact.
Airtel menu Function related Airtel Menu services.
Settings Set the conguration for the USB modem.
Help Show the help information.
Notes: All the icons are based on windows operation system.
LED Lights
Indication Modem Status
Red Power on, but not registered to a network
Green bright Register to 2G/3G network
Green twinkling Connect to 2G/3G network
Warning and Notice
To the Owner
Some electronic devices are susceptible to electromagnetic interference sent by modem if inadequately
shielded, such as the electronic system of vehicles. Please consult the manufacturer of the device before
using the modem if necessary.
Operating the modem may interfere with medical devices like hearing aids and pacemakers. Please always
keep them more than 20 centimeters away from such medical devices when they are turned on. Turn the
modem off if necessary. Consult a physician or the manufacturer of the medical device before using the mo-
dem.
Be aware of the usage limitation when using a modem at places such as oil warehouses or chemical fac-
tories, where there are explosive gases or explosive products being processed. Turn off your modem if
required.
The use of electronic transmitting devices is forbidden in aircrafts, at petrol stations and in hospitals. Please
observe and obey all warning signs and switch off your modem in these conditions.
Do not touch the inner antenna area if not necessary. Otherwise it will affect your modem’s performance.
Store the modem out of the reach of little children. The modem may cause injury if used as a toy.
Do not touch the metallic parts of the modem so as to avoid a burn, when the modem is working.
Use Your USB Modem
Please use original accessories or accessories that are authorized. Using any unauthorized accessories
may affect your modem’s performance, and violate related national regulations about telecom terminals.
Avoid using the modem near or inside metallic structures or establishments that can emit electromagnetic
waves. Otherwise it may inuence signal reception.
The modem is not waterproof. Please keep it dry and store in a shady and cool place.
Do not use the modem immediately after a sudden temperature change. In such case, it will produce dew
inside and outside the modem, so don’t use it until it becomes dry.
Handle the modem carefully. Do not drop, bend or strike it. Otherwise the modem will be damaged.
No dismantling by non-professionals and only qualied technicians can undertake repair work.
Operating temperature range of -10 °C ~ +60 °C and humidity range of 5% ~ 95% are recommended.
Limited Warranty
This warranty does not apply to defects or errors in the Product caused by:
i. Reasonable abrasion.
ii. End User’s failure to follow ZTE’s installation, operation or maintenance instructions or procedures.
iii. End User’s mishandling, misuse, negligence, or improper installation, disassembly, storage, servicing or
operation of the Product.
iv. Modications or repairs not made by ZTE or a ZTE-certied individual.
v. Power failures, surges, re, ood, accidents, actions of third parties or other events outside ZTE’s rea-
sonable control.
vi. Usage of third-party products, or usage in conjunction with third-party products provided that such de-
fects are due to the combined usage.
vii. Any other cause beyond the range of normal usage intended for the Product.
End User shall have no right to reject or return the Product, or receive a refund for the Product from ZTE under
the above-mentioned situations.
This warranty is End User’s sole remedy and ZTE’s sole liability for defective or nonconforming items, and is
in lieu of all other warranties, expressed, implied or statutory, including but not limited to the implied warran-
ties of merchantability and tness for a particular purpose, unless otherwise required under the mandatory
provisions of the law.
Limitation of Liability
ZTE shall not be liable for any loss of prots or indirect, special, incidental or consequential damages resulting
from or arising out of or in connection with using of this product, whether or not ZTE had been advised, knew
or should have known of the possibility of such damages, including, but not limited to lost prots, interruption of
business, cost of capital, cost of substitute facilities or product, or any downtime cost.
How to Get Help
You can get Help by:
Clicking Help on the software.
Sending E-mail to [email protected]
Visiting http://www.zte.com.cn
Calling Service Hotline: +86–755–26779999
ZTE CORPORATION
NO. 55, Hi-tech Road South, ShenZhen, P.R.China
Postcode: 518057 Tel: +86-755-26779999
URL: http://www.zte.com.cn E-mail: [email protected]
  • Page 1 1
  • Page 2 2

ZTE MF667 User manual

Type
User manual

ZTE MF667 is a versatile USB modem that supports HSPA+/HSUPA/HSDPA/EDGE/GPRS/GSM networks. With speeds of up to 21.6 Mbps, it offers fast and reliable internet connectivity for laptops and desktop PCs. It also allows you to send and receive SMS messages, manage applications, and expand storage with a microSD card up to 32GB. Whether you're at home, in the office, or on the go, the ZTE MF667 provides a convenient and efficient way to stay connected.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI