Empire RF Transmitter Kit Operating instructions

Empire
Brand
Empire
Model
RF Transmitter Kit
Type
Operating instructions

Empire RF Transmitter Kit

The Empire RF Transmitter Kit is a versatile device that allows you to connect your paintball marker to a Magna Drive loader or an upgraded Halo B, Reloader B (all models) with the RF upgrade circuit board. This enables you to take advantage of the advanced features of these loaders, such as their ability to automatically feed paintballs into your marker.

The transmitter kit comes with three different harnesses, so you can easily connect it to your marker. It also has three prongs that allow you to plug it into the harness in either direction. This makes it easy to install and use, even if you are not familiar with paintball markers.

Empire RF Transmitter Kit

The Empire RF Transmitter Kit is a versatile device that allows you to connect your paintball marker to a Magna Drive loader or an upgraded Halo B, Reloader B (all models) with the RF upgrade circuit board. This enables you to take advantage of the advanced features of these loaders, such as their ability to automatically feed paintballs into your marker.

The transmitter kit comes with three different harnesses, so you can easily connect it to your marker. It also has three prongs that allow you to plug it into the harness in either direction. This makes it easy to install and use, even if you are not familiar with paintball markers.

The transmitter kit is designed to work with the Magna Drive loader or an upgraded
Halo B, Reloader B (all models) with the RF upgrade circuit board.
Attaching the RF transmitter to your marker
The transmitter kit comes with 3 dierent harnesses. Some newer markers might have a connector on the circuit
board for easy installation. In most other applications, simply use one of the harnesses and plug in it between your
solenoid and your markers circuit board.
If you are not able to use one of the 3 supplied harnesses, it might be necessary to solder one of them to your
marker. We recommend that you have Paintball Airsmith solder the transmitter to your marker. It is possible to
damage your marker/transmitter electronics if not done properly.
The transmitter kit is designed to work with the Magna Drive loader or an upgraded
Halo B, Reloader B (all models) with the RF upgrade circuit board.
Attaching the RF transmitter to your marker
The transmitter kit comes with 3 dierent harnesses. Some newer markers might have a connector on the circuit
board for easy installation. In most other applications, simply use one of the harnesses and plug in it between your
solenoid and your markers circuit board.
If you are not able to use one of the 3 supplied harnesses, it might be necessary to solder one of them to your
marker. We recommend that you have Paintball Airsmith solder the transmitter to your marker. It is possible to
damage your marker/transmitter electronics if not done properly.
Attaching the Transmitter to the harness
You will notice that the transmitter has 3 prongs coming out of it. Simply plug the transmitter into the harness. It
does not matter which way it is plugged in, it will work in either direction.
See the Magna Drive Loader or the RF Circuit Board instructions for detailed operational info.
Paintball Solutions
570 Mantua Blvd.
Sewell, NJ 08080
800-220-3222
www.paintballsolutions.com
Attaching the Transmitter to the harness
You will notice that the transmitter has 3 prongs coming out of it. Simply plug the transmitter into the harness. It
does not matter which way it is plugged in, it will work in either direction.
See the Magna Drive Loader or the RF Circuit Board instructions for detailed operational info.
Paintball Solutions
570 Mantua Blvd.
Sewell, NJ 08080
800-220-3222
www.paintballsolutions.com
  • Page 1 1
  • Page 2 2

Empire RF Transmitter Kit Operating instructions

Empire
Brand
Empire
Model
RF Transmitter Kit
Type
Operating instructions

Empire RF Transmitter Kit

The Empire RF Transmitter Kit is a versatile device that allows you to connect your paintball marker to a Magna Drive loader or an upgraded Halo B, Reloader B (all models) with the RF upgrade circuit board. This enables you to take advantage of the advanced features of these loaders, such as their ability to automatically feed paintballs into your marker.

The transmitter kit comes with three different harnesses, so you can easily connect it to your marker. It also has three prongs that allow you to plug it into the harness in either direction. This makes it easy to install and use, even if you are not familiar with paintball markers.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents