artograph LED300 Quick start guide
- Category
- Projectors
- Type
- Quick start guide
Artograph LED300 is a versatile digital art projector that enables you to project images and designs onto various surfaces for tracing, art creation, and presentations. With its built-in grids and image adjustment features, you can easily align and manipulate images for precise tracing and composition. The projector supports a range of input sources, including USB drives, SD cards, computers, and smart devices, making it compatible with various media and file formats.
Artograph LED300 is a versatile digital art projector that enables you to project images and designs onto various surfaces for tracing, art creation, and presentations. With its built-in grids and image adjustment features, you can easily align and manipulate images for precise tracing and composition. The projector supports a range of input sources, including USB drives, SD cards, computers, and smart devices, making it compatible with various media and file formats.
8.
TM
TM
Quick Setup Guide
Step One - Review Package Contents:
Important Safety Information
Please refer to pages 2-6 in the enclosed Manual for detailed
Safety Information
Product Warranty
Artograph® products are warranted to be free from defects in material and workmanship for
a period of one year from the date of sale to the original purchaser. Any defective product
will be repaired or replaced by Artograph® at its option, provided the product is returned,
shipping prepaid, to our factory within the warranty period. Customer shall promptly notify
either the original seller or Artograph of any warranty claim in sufficient detail to describe both
the problem and its symptoms along with a copy of the original purchase receipt or other
acceptable proof of purchase. All allowed returns will be provided a return authorization
number. Any product received without an authorization number will be returned. Equipment
repaired or replaced under this warranty will be returned freight or postage prepaid. The
warranty period for repaired or replacement products shall be for the same duration as
the original warranty. This warranty does not cover repair for damage to the product, or
product components or malfunctions caused by (i) misuse, neglect, power failures or
surges, lightning, fire, flood or accident; (ii) use of products or facilities supplied by others;
or (iii) failure to follow installation, operation or maintenance instructions. THE EXPRESS
WARRANTIES HEREIN CONTAINED ARE IN LIEU OF ANY AND ALL OTHER WARRANTIES,
EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT,
EACH OF WHICH SELLER DISCLAIMS AND ARE EXCLUDED. WHILE THERE ARE NO
WARRANTIES WHICH EXTEND BEYOND THE DESCRIPTION ON THE FACE HEREOF,
CUSTOMER’S LOCAL LAW MAY PROVIDE OTHERWISE. SELLER SHALL NOT BE
LIABLE FOR DAMAGES, INCLUDING SPECIAL AND INCIDENTAL OR CONSEQUENTIAL
DAMAGES, INTERRUPTION OF BUSINESS ARISING OUT OF OR IN CONNECTION WITH
PERFORMANCE OF THE PRODUCTS OR USE BY CUSTOMER.
Thank you
Before operating the projector, carefully read the
following step-by-step guide and the enclosed
CD Product Manual.
for purchasing the LED300 Digital Art Projector. The following
guide will assist you with projector setup and operation.
As you review the guide, you will notice that each item has a
corresponding page number. This number refers to a page within
the enclosed (English) comprehensive manual. Visit this page in
the manual for a detailed explanation of the item. If you need to
access the guide in alternate languages, the enclosed CD offers
the entire manual in 27 languages. Each language may be
printed separately.
Artograph encourages you to test all of the projector’s features.
Rest assured all settings can be reverted back to factory defaults
– don’t be a fraid to experiment!
For setup and operation questions or if you have comments,
call our toll-free Customer Service line at 888-975-9555. We
appreciate your business.
Sincerely,
Artograph, Inc.
Included:
1. LED300 (HW300A) Digital Art Projector
2. Lens Cap and Strap - (100-703)
3. Remote and Two AAA Batteries - (100-704)
4. Power Supply (two parts) - (100-705)
5. Computer Cable (PC)
6. Composite Cable
7. Component Cable
8. Mini-DisplayPort to VGA Adapter (Mac) - (100-922)
9. Multi-Card USB Card Reader - (100-910)
10. Tripod Spacer Pad - (151-801)
11. Storage Bag - (151-939)
12. Polishing Cloth
13. CD Manual (306-369) - Printed Manual (English) (306-368)
#225-980
©2012 - 306-367
*(Please note that CD manual refers to the LED300 as HW300A, also the “Optional Extras” listed are available
from other sources and not necessarily from Artograph.)
Want to receive product updates and information? Register your
Artograph product at www.artograph.com to join our mailing list.
All information will remain confidential and solely for Artograph’s use.
1.
2.
3.
4.
5.
6.
9.
12.
11.
13.
7.
10.
Step Two - Getting Started:
1. Remove protective film from projector
2. Install Lens Cap/cord – (48)
3. Install batteries into Remote Control (15)
4. Review Remote Control features (15/16)
USB button for quick access
to USB menus
PAGE UP & DOWN takes you to
the top and bottom of your USB
directory list
RATIO changes the screen
viewing size
AUTO image quality for
computer connected via RGB
ARROW KEYS to navigate
BACK, also called
EXIT in onscreen menus
KEYSTONE ADJUSTMENT
SPECIAL FUNCTION KEYS
OK to select
Q MENU to adjust aspect
ratio, picture mode, sleep timer
and USB eject
USB controls and USB video
controls, play, forward, and
rewind video clips
INPUT to choose between
USB, HDMI, VIDEO, or RGB
MUTE
MARK to put a check box by
images you want to select
MENU opens grid & advanced
image adjustment menus
POWER
LED300 Manual
Step Five - Image Settings and Adjustments:
Step Four - Input Sources:
Step Three - Start projector:
USB: (24-34)
Input for flash drives and SD card reader, included (21-34)
When device is installed, the USB menu shows the
following choices.
Photos: (29-31)
Projector can only display JPEG files only.
Movies: (23-29)
DivX videos, projector must be registered (28).
Music: (32)
MP3 files
Files: (33-34)
Access Microsoft Office files. Refer to manual for supported
file formats.
Games: (35)
Silly, but they are just games.
RGB/HDMI: (44-46)
RGB to PC Computer: Connect using enclosed RGB cable.
When connected, the projected image mirrors computer image.
Refer to computer operation manual for connecting to a projector.
RGB to MAC Computer:Connect using enclosed RGB cable and
Mini-DisplayPort/VGA adapter. To connect MAC – Go to
Grids Patterns
The LED300 has 18 grids built into projector to align and compose
images and designs. The grids can be used alone as a template
or overlaid on any photo or image from any source.
To Select Grids Using Remote
Project grid only (Remove any attached connections):
MENU SCREEN Grid Pattern Pattern Color (black
is only visible with image) Back Back Back Grid.
Grid over USB image (Select grid first): USB Photo List
Photo Back.
Grid over Computer/Smart device image (RGB/HDMI)
(Select grid first): attach device.
Grayscale - 3 methods Color to Black & White
USB Only 1. Q-Menu Set Video Color Adjust to “0”
2. Menu (Main) Screen Gray Scale On
3. Menu (Main) Picture Color Adjust to “0”
Image Flip
Menu Screen PJT or Q-Menu PJT
Image Rotation
USB image only Pop up Menu
Key-Stone Adjustment
Use Key.s or Key.s on Remote Control
* Perspective grids for template use only.
Mobile Floor Stand - #225-359
Stand features a 12” x 15” platform to accommodate any
Artograph projector. Platform adjusts vertically from 36in/92cm to
54 in/137 cm and rotates (360-degrees) and tilts (15°) to assure a
perfect alignment and placement of the projected image. Platform
is mounted on a sturdy aluminum column and a five-spoke base
with lockable rolling casters.
Projector Storage Bag™ - #225-700
Designed to safely store and carry any Artograph projector.
Constructed of rugged padded nylon (14 in x15 in x8 in/ 36 cm
x 38 cm x20 cm), a carrying handle with shoulder strap and a
removable zippered pouch for storing an extra lens or supplies.
E300 Economy Hard Sided Storage Case™ - #225-701
Custom padded hard-sided case safely stores projectors and
cables also features a secure latching system and a comfortable
soft over-mold grip for easy carrying.
D300 Deluxe Hard Sided Storage Case™ - #225-702
Deluxe hard sided case features a custom designed padded
interior to protect projector and all cables. Air and water tight,
case is virtually indestructible. Chemical and corrosion proof
and features a durable rubber O-ring seal and air pressure
compensation valve to further safe guard the contents.
LED Tripod™ - #225-995
Mounts securely to projector via the built in screw mount allowing
images to be projected in virtually any direction including vertically
onto a table top or ceiling. Fully adjustable tripod can be mounted
onto a table top or floor. Includes zippered carrying case.
Important: To disconnect a USB storage device, push the
BACK key until menu items disappear (black screen) then
remove drive.
ARTOGRAPH PROJECTOR TRIPOD
(NOT INCLUDED #225-995)
2. 3.
2.
Available Artograph Accessories:
1. Mount projector onto a sturdy flat surface near a power outlet
(Do not mount projector onto a soft surface or block vents).
Please note: When mounting to a tripod, install Tripod
Spacer Pad (1.) (included) between tripod and projector.
2. Connect the power supply cord into a nearby outlet and back
of projector
3. Position projector toward any surface.
4. Press the POWER (2.) button on the remote control or
projector
control panel. (Verify the lens cap is removed before turning on
the power) (17)
5. To focus – rotate focus wheel (3.) located on top of unit.
Applications System Preferences Display Detect
Display Arrangement Mirror Display. Instructions may vary
with versions.
RGB to Smart phones or Pads/Tablets: Connect using available
VGA or HDMI (AV) adapters. iPhone versions 4S and iPad 3 only.
Refer to specific device information to ensure connectivity and
proper connection adapter.
6 Sample Grids
1.
USB
HDMI
COMPUTER
COMPOSITE IN
COMPONENT IN
POWER IN
FOCUS
HEADPHONES/
SPEAKERS
-
1
-
2
artograph LED300 Quick start guide
- Category
- Projectors
- Type
- Quick start guide
Artograph LED300 is a versatile digital art projector that enables you to project images and designs onto various surfaces for tracing, art creation, and presentations. With its built-in grids and image adjustment features, you can easily align and manipulate images for precise tracing and composition. The projector supports a range of input sources, including USB drives, SD cards, computers, and smart devices, making it compatible with various media and file formats.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
