Black & Decker XT1600 User manual

Category
Irons
Type
User manual

This manual is also suitable for

1
www.blackanddecker.com
9 10 11
123
456
78
13
12
English 3
Italiano 6
Español 11
Português 15
∂ÏÏËÓÈη 19
3
ENGLISH
Intended use
Your Black & Decker iron has been designed for ironing
garments made of linen, cotton, silk, wool and synthetic
materials. This product is intended for household use only.
Safety instructions
Warning! When using mains-powered appliances, basic
safety precautions, including the following, should always
be followed to reduce the risk of fire, electric shock and
personal injury.
Read all of this manual carefully before using the appliance.
The intended use is described in this manual. The use of
any accessory or attachment or the performance of any
operation with this appliance other than those
recommended in this instruction manual may present a
risk of personal injury.
Retain this manual for future reference.
Using your appliance
Always take care when using the appliance.
Do not use the appliance outdoors.
Do not operate the appliance if your hands are wet.
Do not operate the appliance if you are barefoot.
Guide the power supply cord neatly so it does not hang
over the edge of a worktop and cannot be caught
accidentally or tripped over.
Never pull the power supply cord to disconnect the plug
from the socket. Keep the power supply cord away from
heat, oil and sharp edges.
If the power supply cord is damaged during use,
disconnect the appliance from the power supply
immediately. Do not touch the power supply cord before
disconnecting from the power supply.
Disconnect the appliance from the power supply when not
in use and before cleaning.
Safety of others
Do not allow children or any person unfamiliar with these
instructions to use the appliance.
Do not allow children or animals to come near the work
area or to touch the appliance or power supply cord.
Close supervision is necessary when the appliance is
used near children.
After use
Switch off, remove the plug from the socket and let the
appliance cool down before leaving it unattended and
before changing, cleaning or inspecting any parts of the
appliance.
When not in use, the appliance should be stored in a dry
place. Children should not have access to stored
appliances.
Inspection and repairs
Before use, check the appliance for damaged or defective
parts. Check for breakage of parts, damage to switches
and any other conditions that may affect its operation.
Do not use the appliance if any part is damaged or defective.
Have any damaged or defective parts repaired or replaced
by an authorised repair agent.
Before use, check the power supply cord for signs of
damage, ageing and wear.
Do not use the appliance if the power supply cord or
mains plug is damaged or defective.
If the power supply cord or mains plug is damaged or
defective it must be repaired by an authorised repair
agent in order to avoid a hazard. Do not cut the power
supply cord and do not attempt to repair it yourself.
Never attempt to remove or replace any parts other than
those specified in this manual.
Electrical safety
Always check that the mains voltage corresponds to the
voltage on the rating plate.
This product must be earthed.
Do not immerse the appliance, power supply cord
or plug in water or other liquid.
If it is necessary to use an extension cable,
use an approved 3-core cable suitable for the
power input of this product (see rating plate).
Additional safety instructions for irons
Always route the cord carefully to avoid a tripping hazerd.
Do not use the appliance near water.
Do not place the appliance near heat sources or directly
under cabinets. Do not use the appliance in the presence
of explosive or flammable materials.
The filling apperture must not be opened during use.
Steam may escape from the soleplate.
Surfaces may be hot during use and during the cooldown
period.
Set the temperature control dial to the min position
before plugging in or out.
Let the appliance cool down before leaving it unattended
and before cleaning or inspecting any parts of the
appliance.
The power supply cord should not touch the hot soleplate
during use or during the cool down period.
Do not touch the soleplate until it has cooled down.
Wait until the appliance has cooled down before
emptying the water tank as the water may still be hot.
Always diconnect the appliance from the supply before
filling, emptying, cleaning, or carying out any
maintenance on the appliance.
4
ENGLISH
Features
1. Temperature control dial
2. Heating light
3. Self-clean button
4. Steam control dial
5. Steam burst button
6. Spray button
7. Water tank cover
8. Spray nozzle
9. Soleplate
10. Water tank
11. Maximum filling level indicator
12. Cord storage
13. Heel rest
Before first use
Cleaning the soleplate
Make sure that the appliance is unplugged.
Fill the appliance with water as described below.
Use the self-clean system as described below.
When finished, wipe the soleplate and steam vents with
a cloth.
Some parts of the appliance have been lightly greased and as
a result the appliance may smoke slightly when switched on
for the first time. This will cease after a short while.
Assembly
Warning! Before assembly, make sure that the appliance is
switched off and unplugged.
Filling the water tank (fig. A)
In order to be able to use the steam function or the spray
feature, you will first need to fill the water tank with water.
Make sure that the appliance is unplugged.
Open the water tank cover (7).
Hold the appliance at an angle as shown.
Fill the appliance with water using the beaker provided.
Close the water tank cover.
Warning! Never fill above the maximum filling level (11).
Normal tap water can be used, but if you live in a hard water
area the use of distilled water is recommended. Do not use
chemically descaled water.
Use
Warning! Do not leave the appliance unattended while it is
connected to the power supply and during the cool down period.
Temperature setting
The required temperature setting depends on the garment
fabric.
Adjust the temperature control dial (1) to the required
setting:
Synthetic
● ● Silk, wool
● ● ● Cotton, linen
If you are unsure of the fibre content of a garment, start with
a low temperature setting and test on a small area (seam or
inside hem). If wrinkles remain, gradually increase the heat
setting until you find the optimum setting.
Using as a dry iron
Stand the appliance on its heel rest (13).
Plug the appliance in and switch on.
Set the steam control dial (4) to the ’O’ position.
Adjust the temperature control dial (1) to the required
setting.
The heating light (2) will switch off when the appliance has
reached the required temperature.
Using as a steam iron
Fill the water tank as described above.
Stand the appliance on its heel rest (13).
Plug the appliance in and switch on.
Adjust the temperature control dial (1) to the required
steam setting.
The heating light (2) will switch on. When the heating light
switches off, the iron will be ready for use as a steam iron.
The heating light will regularly switch on and off whilst ironing.
To create steam, set the steam control dial (4) to the
required steam position.
Using the steam burst button
The steam burst feature can only be used whilst ironing on a
high temperature setting.
Make sure that there is water in the tank and the temperature
control dial (1) is set to the required steam position.
Lift the appliance and press the steam burst button (5).
You may need to press a few times to activate the pump.
XT1820 - Vertical steaming
The appliance can also be held vertically to remove creases
from hanging clothes, curtains etc.
Using the spray button
The spray feature can be used at any temperature setting
when either steam or dry ironing.
Make sure that there is water in the tank.
Press the button (6) several times to activate the pump
while you are ironing.
5
ENGLISH
Using the self-clean button
The self-clean function must be used before using the
appliance for the first time and then regularly to remove scale.
Fill the tank (10) to the maximum filling level (11).
Set the temperature control dial (1) to the max position.
Plug the appliance in and switch on.
Allow the appliance to heat up until the heating light (2)
switches off and then on again.
Unplug the appliance and hold it horizontally over the sink.
Press the self-clean button (3).
Hot water and steam will come out of the vents. Impurities
and scale will be washed away.
Move the iron backwards and forwards while this is
happening.
Release the self-clean button.
Stand the appliance upright on its heel.
Plug the appliance in and switch on.
Iron an old cloth or towel to dry the soleplate.
XT1820 - Anti-drip feature
The anti-drip feature ensures that the appliance will not drip
water at low temperatures after steaming. Steaming will
restart as soon as a suitable steam ironing temperature has
been selected.
Hints for optimum use
Sort the articles to be ironed according to the fabric. Start
ironing with the fabrics requiring the lowest heat setting.
The appliance can be used as a dry iron even if there is
water in the tank. Do not fill the tank with water if the
appliance is to be used as a dry iron for an extended period.
Avoid ironing over zippers, rivets on jeans etc. as they will
scratch the soleplate.
Cleaning and storage
Warning! Before cleaning and storing, unplug the appliance
and allow it to cool down.
Pour out any remaining water after each use by tilting the
appliance forward.
Clean the body with a soft damp cloth.
Wipe scale and other residues off the soleplate with a
damp cloth.
Store in an upright position. The cord can be wound
around the cord storage (12).
Protecting the environment
Black & Decker provides a facility for recycling
Black & Decker products once they have reached the
end of their working life. This service is provided
free of charge. To take advantage of this service
please return your product to any authorised repair
agent who will collect them on our behalf.
You can check the location of your nearest authorised repair
agent by contacting your local Black & Decker office at the
address indicated in this manual. Alternatively, a list of
authorised Black & Decker repair agents and full details of our
after-sales service and contacts are available on the Internet
at: www.2helpU.com
Technical data
XT1600 XT1800
XT1820
Voltage V
AC
230 230
Power input W 1,600 1,800
EC declaration of conformity
XT1600 / XT1800 / XT1820
Black & Decker declares that these products conform to:
89/336/EEC, 73/23/EEC, EN 55014, EN 61000, EN 60335
Kevin Hewitt
Director of Consumer Engineering
Spennymoor, County Durham DL16 6JG,
United Kingdom
1-11-2004
Guarantee
Black & Decker is confident of the quality of its products and
offers an outstanding guarantee. This guarantee statement is
in addition to and in no way prejudices your statutory rights.
The guarantee is valid within the territories of the Member
States of the European Union and the European Free Trade
Area.
If a Black & Decker product becomes defective due to faulty
materials, workmanship or lack of conformity, within 24 months
from the date of purchase, Black & Decker guarantees to
replace defective parts, repair products subjected to fair wear
and tear or replace such products to ensure minimum
inconvenience to the customer unless:
The product has been used for trade, professional or hire
purposes;
The product has been subjected to misuse or neglect;
The product has sustained damage through foreign
objects, substances or accidents;
6
ENGLISH
Repairs have been attempted by persons other than
authorised repair agents or Black & Decker service staff.
To claim on the guarantee, you will need to submit proof of
purchase to the seller or an authorised repair agent. You can
check the location of your nearest authorised repair agent by
contacting your local Black & Decker office at the address
indicated in this manual. Alternatively, a list of authorised
Black & Decker repair agents and full details of our after-sales
service and contacts are available on the Internet at:
www.2helpU.com
Please register at our website www.blackanddecker.com
to be kept up to date on new products and special offers.
Further information on the Black & Decker brand and our range
of products is available at www.blackanddecker.com
22
∂§§∏¡π∫∞
EÓËÌÂÚˆı›Ù ÁÈ· ÙÔ ÏËÛȤÛÙÂÚÔ Î¤ÓÙÚÔ ÂÈÛ΢ÒÓ Ù˘
ÂÚÈÔ¯‹˜ Û·˜, ÂÈÎÔÈÓˆÓÒÓÙ·˜ Ì ٷ ÁÚ·Ê›· Ù˘ Black & Decker
ÛÙË ‰È‡ı˘ÓÛË Ô˘ ·Ó·ÁÚ¿ÊÂÙ·È ÛÙÔ ÂÁ¯ÂÈÚ›‰ÈÔ. E›Û˘, ÁÈ·
Ó· ÏËÚÔÊÔÚËı›Ù ÁÈ· Ù· ÂÍÔ˘ÛÈÔ‰ÔÙË̤ӷ ΤÓÙÚ·
ÂÈÛ΢ÒÓ Ù˘ Black & Decker, ÙȘ ÏÂÙÔ̤ÚÂȘ Î·È ÙÔ˘˜
·ÚÌfi‰ÈÔ˘˜ ÙˆÓ ˘ËÚÂÛÈÒÓ Ô˘ ·Ú¤¯ÔÓÙ·È ÌÂÙ¿ ÙËÓ ÒÏËÛË,
ÌÔÚ›Ù ӷ ·Ó·ÙÚ¤ÍÙ ÛÙÔ ¢È·‰›ÎÙ˘Ô ÛÙË ‰È‡ı˘ÓÛË:
www.2helpU.com
∆¯ÓÈο ¯·Ú·ÎÙËÚÈÛÙÈο
XT1600 XT1800
XT1820
∆¿ÛË V
AC
230 230
πÛ¯‡˜ ÂÈÛfi‰Ô˘ W 1.600 1.800
¢‹ÏˆÛË Û˘ÌÌfiÚʈÛ˘ E∫
XT1600 / XT 1800 / XT 1820
Black & Decker ‰ËÏÒÓÂÈ fiÙÈ ·˘Ù¿ Ù· ËÏÂÎÙÚÈο ÂÚÁ·Ï›·
ۯ‰ȿÛÙËÎ·Ó Û‡Ìʈӷ ÌÂ:
89/336/E√∫, 73/23/E√∫, EN 55014, EN 61000, EN 60335
Kevin Hewitt
¢È¢ı˘ÓÙ‹˜ Ì˯·ÓÔÏÔÁ›·˜
Spennymoor, County Durham DL16 6JG,
United Kingdom
1-11-2004
EÁÁ˘ËÛË
∏ Black & Decker Â›Ó·È Û›ÁÔ˘ÚË ÁÈ· ÙËÓ ÔÈfiÙËÙ· ÙˆÓ
ÚÔ˚fiÓÙˆÓ Ù˘ Î·È ·Ú¤¯ÂÈ ÛËÌ·ÓÙÈ΋ ÂÁÁ‡ËÛË. ∏ ·ÚÔ‡Û·
ÁÚ·Ù‹ ÂÁÁ‡ËÛË ·ÔÙÂÏ› ÚfiÛıÂÙÔ ‰Èη›ˆÌ¿ Û·˜ Î·È ‰ÂÓ
˙ËÌÈÒÓÂÈ Ù· Û˘ÓÙ·ÁÌ·ÙÈο Û·˜ ‰ÈηÈÒÌ·Ù·. ÂÁÁ‡ËÛË ÈÛ¯‡ÂÈ
ÂÓÙfi˜ Ù˘ ÂÈÎÚ¿ÙÂÈ·˜ ÙˆÓ ∫Ú·ÙÒÓ ªÂÏÒÓ Ù˘ E˘Úˆ·˚΋˜
EÓˆÛ˘ Î·È Ù˘ E˘Úˆ·˚΋˜ ∑ÒÓ˘ EÏ¢ı¤ÚˆÓ ™˘Ó·ÏÏ·ÁÒÓ.
™Â ÂÚ›ÙˆÛË Ô˘ οÔÈÔ ÚÔ˚fiÓ Ù˘ Black & Decker
·ÚÔ˘ÛÈ¿ÛÂÈ ‚Ï¿‚Ë ÂÍ·ÈÙ›·˜ ÂÏ·Ùو̷ÙÈÎÒÓ ˘ÏÈÎÒÓ, ÔÈfiÙËÙ·˜
ÂÚÁ·Û›·˜ ‹ ¤ÏÏÂȄ˘ Û˘Ìʈӛ·˜ Ì ÙȘ ÚԉȷÁڷʤ˜ ÂÓÙfi˜
24 ÌËÓÒÓ ·fi ÙËÓ ËÌÂÚÔÌËÓ›· ·ÁÔÚ¿˜, Ë Black & Decker
ÂÁÁ˘¿Ù·È ÙËÓ ·ÓÙÈηٿÛÙ·ÛË ÙˆÓ ÂÏ·Ùو̷ÙÈÎÒÓ ÙÌËÌ¿ÙˆÓ,
ÙËÓ ÂÈÛ΢‹ ÚÔ˚fiÓÙˆÓ Ô˘ ¤¯Ô˘Ó ˘ÔÛÙ› ‡ÏÔÁË ÊıÔÚ¿
ÏfiÁˆ ¯Ú‹Û˘ ÙËÓ ·ÓÙÈηٿÛÙ·ÛË ÙˆÓ ÚÔ˚fiÓÙˆÓ
ÚÔÎÂÈ̤ÓÔ˘ Ó· ÂÍ·ÛÊ·Ï›ÛÂÈ ÙËÓ ÂÏ¿¯ÈÛÙË ÂÓfi¯ÏËÛË ÛÙÔ˘˜
ÂÏ¿Ù˜ Ù˘, ÂÎÙfi˜ ·Ó:
∆Ô ÚÔ˚fiÓ ¤¯ÂÈ ¯ÚËÛÈÌÔÔÈËı› Û ÂÚÁ·ÛÈ·Îfi,
Â·ÁÁÂÏÌ·ÙÈÎfi ÂÚÈ‚¿ÏÏÔÓ ‹ ·Ó ¤¯ÂÈ ÂÓÔÈÎÈ·ÛÙ›
E¯ÂÈ Á›ÓÂÈ ÂÛÊ·Ï̤ÓË ¯Ú‹ÛË ÙÔ˘ ÚÔ˚fiÓÙÔ˜ ‹ ·Ó ¤¯ÂÈ
·Ú·ÌÂÏËı›
∆Ô ÚÔ˚fiÓ ¤¯ÂÈ ˘ÔÛÙ› ‚Ï¿‚Ë ·fi ¿ÏÏ· ·ÓÙÈΛÌÂÓ·, ·fi
Ô˘Û›Â˜ ‹ ÏfiÁˆ ·Ù˘¯‹Ì·ÙÔ˜
E¯ÂÈ Á›ÓÂÈ ÚÔÛ¿ıÂÈ· ÂÈÛ΢‹˜ ·fi ÌË ÂÍÔ˘ÛÈÔ‰ÔÙË̤ӷ
ΤÓÙÚ· ÂÈÛ΢ÒÓ ‹ ·fi ÚÔÛˆÈÎfi Ô˘ ‰ÂÓ ·Ó‹ÎÂÈ ÛÙÔ
ÚÔÛˆÈÎfi Ù˘ Black & Decker
°È· Ó· ÈÛ¯‡ÛÂÈ Ë ÂÁÁ‡ËÛË, Ú¤ÂÈ Ó· ˘Ô‚¿ÏÂÙ ·fi‰ÂÈÍË
·ÁÔÚ¿˜ ÛÙÔÓ ˆÏËÙ‹ ‹ ÙÔ ÂÍÔ˘ÛÈÔ‰ÔÙË̤ÓÔ Î¤ÓÙÚÔ
ÂÈÛ΢ÒÓ. EÓËÌÂÚˆı›Ù ÁÈ· ÙÔ ÏËÛȤÛÙÂÚÔ Î¤ÓÙÚÔ
ÂÈÛ΢ÒÓ Ù˘ ÂÚÈÔ¯‹˜ Û·˜, ÂÈÎÔÈÓˆÓÒÓÙ·˜ Ì ٷ ÁÚ·Ê›·
Ù˘ Black & Decker ÛÙË ‰È‡ı˘ÓÛË Ô˘ ·Ó·ÁÚ¿ÊÂÙ·È ÛÙÔ
ÂÁ¯ÂÈÚ›‰ÈÔ. E›Û˘, ÁÈ· Ó· ÏËÚÔÊÔÚËı›Ù ٷ ÂÍÔ˘ÛÈÔ‰ÔÙË̤ӷ
ΤÓÙÚ· ÂÈÛ΢ÒÓ Ù˘ Black & Decker Î·È ÙȘ ÏÂÙÔ̤ÚÂȘ ηÈ
ÙÔ˘˜ ·ÚÌfi‰ÈÔ˘˜ ÙˆÓ ˘ËÚÂÛÈÒÓ Ô˘ ·Ú¤¯ÔÓÙ·È ÌÂÙ¿ ÙËÓ
ÒÏËÛË, ÌÔÚ›Ù ӷ ·Ó·ÙÚ¤ÍÙ ÛÙÔ ¢È·‰›ÎÙ˘Ô ÛÙË ‰È‡ı˘ÓÛË:
www.2helpU.com
¶·Ú·Î·ÏÒ ÂÁÁڷʛ٠ÛÙÔ website Ì·˜,
www.blackanddecker.com, ÁÈ· Ó· ÂÓËÌÂÚÒÓÂÛÙ ۯÂÙÈο ÌÂ
Ù· Ó¤· Ì·˜ ÚÔ˚fiÓÙ· Î·È ÙȘ ÂȉÈΤ˜ ÚÔÛÊÔÚ¤˜ Ì·˜.
¶ÂÚÈÛÛfiÙÂÚ˜ ÏËÚÔÊÔڛ˜ Û¯ÂÙÈο Ì ÙË Ì¿Úη
Black & Decker Î·È ÙË ÛÂÈÚ¿ ÚÔ˚fiÓÙˆÓ Ì·˜ ı· ‚Ú›Ù ÛÙË
‰È‡ı˘ÓÛË www.blackanddecker.com
24
477718-00
EÏÏ¿‰· Black & Decker (EÏÏ·˜) ∞.E. ∆ËÏ. 210 8981616
™ÙÚ¿‚ˆÓÔ˜ 7 & §ÂˆÊ. µÔ˘ÏÈ·Á̤Ó˘ 159 ∆ËÏ. 210 8982630
166 74 °Ï˘Ê¿‰· - ∞ı‹Ó· º·Í Service 210 8983285
España Black & Decker Ibérica, S.C.A. Tel. 934 797 400
Parque de Negocios “Mas Blau” Fax 934 797 419
Edificio Muntadas, c/Bergadá, 1, Of. A6
08820 El Prat de Llobregat (Barcelona)
Italia Black & Decker Italia SpA Tel. 039-23871
Viale Elvezia 2 Fax 039-2387592/2387594
20052 Monza (MI) Numero verde 800-213935
Portugal Black & Decker Tel. 214667500
Rua Egas Moniz 173 Fax 214667575
S. João do Estoril
2766-651 Estoril
United Kingdom Black & Decker Tel. 01753 511234
210 Bath Road Fax 01753 551155
Slough, Berkshire SL1 3YD Helpline 01753 574277
11/04
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24

Black & Decker XT1600 User manual

Category
Irons
Type
User manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI