Numark DM 1050 Owner's manual

Brand: Numark

Model: DM 1050

Category: Musical Equipment

Type: Owner's manual

PROFESSIONAL DJ MIXER

Quick Start Owner’s Manual

Manual de inicio rápido para el usuario

(ESPAÑOL)

Schnellbedienungsanleitung (DEUTSCH)

Manuel d’utilisation du propriétaire

(FRANÇAIS)

Manuale rapido di utilizzazione (ITALIANO)

CONTENUTO DELLA CONFEZIONE

• MIXER

•

CAVI DI ALIMENTAZIONE

CONTENU DE LA BOÎTE

• MIXER

•

BLOC D’ALIMENTATION

SCHACHTELINHALT

• MISCHPULT

•

STROMKABEL

BOX CONTENTS

• MIXER

•

POWER SUPPLY

CONTENIDOS DE LA CAJA

• MEZCLADOR

•

FUENTE DE ALIMENTACIÓN

MIXER QUICK SETUP GUIDE (ENGLISH)

1. Make sure all items listed on the front of this guide are included in the box.

2. READ SAFETY INSTRUCTION BOOKLET BEFORE USING THE

PRODUCT

3. Study this setup diagram.

4. Place mixer in an appropriate position for operation.

5. Make sure all devices are turned off and all faders are at “zero”

6. Connect all stereo input sources as indicated in the diagram.

7. Connect the stereo outputs to the power amplifier(s), tape decks, and/or

audio sources.

8. Plug your mixer and other devices into AC power.

9. Switch everything on in the following order.

• audio input sources (i.e. turntables or CD players)

• your mixer

• last, any amplifiers

10. When turning off, always reverse this operation by,

• turning off amplifiers

• your mixer

• last, any input devices

11. Go to http://www.numark.com for product registration.

FRONT PANEL FEATURES

1. Power LED: Illuminates when the mixer is

on.

2. Mic Gain: This knob adjusts the volume of

the microphone input.

3. Mic Treble: This knob adjusts the high-tone

of the microphone.

4. Mic Bass: This knob adjusts the low-tone of

the microphone.

5. Channel Gain: This rotary control adjusts

the pre-fader input level.

6. Channel Treble: This rotary control adjusts

the high-tone level.

7. Channel Middle: This rotary control adjusts

the middle-tone level.

8. Channel Bass: This rotary control adjusts

the low-tone level.

9. Input Selector: This toggles select what

input source is routed to the channel from

the rear panel connected units.

10. Channel Fader: This slide fader is used to

adjust the level sent to program mix.

11. Headphone Volume: This rotary control

adjusts the volume level of the headphone

output.

12. Headphone Jack: Your headphones can be

connected to this ¼” terminal. The volume

should always be set at its lowest setting

while connecting and disconnecting

headphones to prevent damage to

headphones and/or your hearing.

13. Cue Slider: Channels 1 and 2 can be

previewed using this mini-crossfader.

Sliding this to the left plays the left

“channel-1” and sliding to the right plays the

right “channel-2”.

14. Cue Meter: This meter shows the peak,

“PFL”, Pre Fader levels of channels 1 and 2.

You can use the channel “Gain” and “EQ”

controls to match the levels of input signals

while cueing.

15. Master Cue Selector: When selected only

the master output is heard in the

headphones.

16. Replaceable Crossfader: This slide fader

blends audio between the channels assigned

to the left and right assign switches.

Note: This fader is user replaceable if it

should ever wear out. Simply remove the

facepanel and then remove the screws

holding it in position. Replace the fader with

a quality authorized replacement from your

local Numark retailer.

17. Crossfader Direction: Activation of this

switch reverses the assignment of CH-1 and

CH-2 on the crossfader.

18. Crossfader Contour Control: The position

of this control determines how quickly or

intensely the crossfader will blend.

19. Master Output Knob: This rotary control

adjusts the main output volume.

20. Stereo Level Indicator: quickly and

accurately tracks level of audio.

REAR PANEL FEATURES

Note: It is recommended that the mixer be

turned off before connecting and

disconnecting any sources to the inputs of the

mixer.

1. Microphone Input: Microphones with a ¼”

connector can be connected to this input

terminal.

2. Phono Inputs: This input is used for

connecting your turntables through the sensitive

RIAA phono preamplifiers. Only turntables with

phono level output should be attached. Line

level turntables and other devices may be

attached if the Phono/Line rear panel switch is

set to the line position.

3. Phono/Line Source Switch: This switch

activates and deactivates the sensitive RIAA

phono preamplifiers. Only turntables with

phono level output should be assigned

when the switch is in the phono position.

Some turntables offer line level output. To use

these turntables and other line devices like CD

players, switch the input to Line.

4. GND: This screw connector should be used to

secure any turntables or other devices

connected to the mixer that need to be

grounded.

5. Line Inputs: CD players, Tape Decks, Samplers

or other line level input devices should be

connected to these inputs.

6. Record Output: This RCA output is for

connecting a recording device such as a tape

deck or CD recorder. The level of the record

output is based upon pre-master levels.

7. Master Output (RCA): This output is for

connecting an external monitoring device such

as a PA system, powered monitors or a home

stereo. The level of the master stereo output

signal is controlled by the master fader.

8. AC In: This mixer is designed to work with the

power supply assembly that comes with the

unit. While the power is switched off, plug the

power supply into the mixer first, then plug it

into the outlet.

9. Power Switch: Use this switch to turn on the

mixer after all input devices are already

connected to prevent damage to your

equipment. Turn the mixer on before you turn

on amplifiers and turn of amplifiers before you

turn off the mixer.

Page is loading ...

Numark DM 1050 Owner's manual

Brand: Numark

Model: DM 1050

Category: Musical Equipment

Type: Owner's manual

Download PDF

report

in other languages

italiano: Numark DM 1050 Manuale del proprietario
français: Numark DM 1050 Le manuel du propriétaire
español: Numark DM 1050 El manual del propietario
Deutsch: Numark DM 1050 Bedienungsanleitung

Numark DM 1050 Owner's manual

Numark DM 1050 Owner's manual

in other languages

Related papers

Other documents