Sony HT-DDW7500 Quick start guide

Sony
Brand
Sony
Model
HT-DDW7500
Category
AV receivers
Type
Quick start guide

Sony HT-DDW7500 is a home audio system that can be used to enjoy multi-channel surround sound from various sources such as DVD players, Blu-ray disc players, satellite tuners, set-top boxes, TVs, and speakers. It has a variety of features that make it a great choice for home entertainment, including:

  • HDMI connectivity: The HT-DDW7500 has multiple HDMI inputs and outputs, which allows you to connect it to a variety of devices, such as TVs, DVD players, and Blu-ray disc players.
  • Optical digital input: The HT-DDW7500 also has an optical digital input, which allows you to connect it to devices that do not have HDMI outputs, such as older DVD players and CD players.

Sony HT-DDW7500 is a home audio system that can be used to enjoy multi-channel surround sound from various sources such as DVD players, Blu-ray disc players, satellite tuners, set-top boxes, TVs, and speakers. It has a variety of features that make it a great choice for home entertainment, including:

  • HDMI connectivity: The HT-DDW7500 has multiple HDMI inputs and outputs, which allows you to connect it to a variety of devices, such as TVs, DVD players, and Blu-ray disc players.
  • Optical digital input: The HT-DDW7500 also has an optical digital input, which allows you to connect it to devices that do not have HDMI outputs, such as older DVD players and CD players.
4-138-610-11(1)
HT-DDW7500
Quick Setup Guide
Guía de instalación rápida
1: Installing the speakers/
1: Instalación de los altavoces
(1)
Sony Corporation © 2009 Printed in Malaysia
Video components/Componentes de vídeo
2: Connecting the speakers and subwoofers/2: Conexión
de los altavoces y los altavoces potenciadores de graves
3: Connecting other components/
3: Conexión de otros componentes/
CENTER SURROUND BACK
LR
L
R
DIGITAL
(ASSIGNABLE)
DC5V
0.7A MAX
DMPORT
SAT IN
SAT
IN
DVD IN BD IN OUT
AM
Y
P
B
/
C
B
COMPONENT VIDEO
OUT
IN
P
R
/
C
R
DVD
IN
VIDEO 1
IN
MONITOR
OUT
SA-CD
/
CD
/
CD-R
VIDEO 1
IN
TV
TV
AUDIO
IN
VIDEO
IN
SAT
AUDIO
OUT
AUDIO
OUT
VIDEO
OUT
VIDEO
OUT
IN
OPTICAL
AUDIO
IN
VIDEO
IN
SUBWOOFER
MONITOR
AUDIO
IN
VIDEO
IN
BD
SAT
IN
DVD
IN
DCSV
50mA MAX
OUT OUT
OPTICAL COAXIAL
CENTER SURROUND BACK
SURROUND
FRONT
L
L
R
R
LR
HDMIANTENNA
SPEAKERS
SYSTEM CONTROL
SS-CNP7500
L
R
DIGITAL
(ASSIGNABLE)
DC5V
0.7AMAX
DMPORT
SATIN
SAT
IN
DVDIN BDIN OUT
AM
Y
P
B
/
C
B
COMPONENTVIDEO
OUT
IN
P
R
/
C
R
DVD
IN
VIDEO1
IN
MONITOR
OUT
SA-CD
/
CD
/
CD-R
VIDEO1
IN
TV
TV
AUDIO
IN
VIDEO
IN
SAT
AUDIO
OUT
AUDIO
OUT
VIDEO
OUT
VIDEO
OUT
IN
OPTICAL
AUDIO
IN
VIDEO
IN
SUBWOOFER
MONITOR
AUDIO
IN
VIDEO
IN
BD
SAT
IN
DVD
IN
DCSV
50mAMAX
OUT OUT
OPTICAL COAXIAL
CENTER SURROUNDBACK
SURROUND
FRONT
L
L
R
R
LR
HDMIANTENNA
SPEAKERS
SYSTEMCONTROL
CENTER SURROUND BACK
LR
SS-SRP7500 SS-SRP7500
?
/
1
L
R
DIGITAL
(ASSIGNABLE)
DC5V
0.7A MAX
DMPORT
SAT IN
SAT
IN
DVD IN BD IN OUT
AM
Y
P
B
/
C
B
COMPONENT VIDEO
OUT
IN
P
R
/
C
R
DVD
IN
VIDEO 1
IN
MONITOR
OUT
SA-CD
/
CD
/
CD-R
VIDEO 1
IN
TV
TV
AUDIO
IN
VIDEO
IN
SAT
AUDIO
OUT
AUDIO
OUT
VIDEO
OUT
VIDEO
OUT
IN
OPTICAL
AUDIO
IN
VIDEO
IN
SUBWOOFER
MONITOR
AUDIO
IN
VIDEO
IN
BD
SAT
IN
DVD
IN
DCSV
50mA MAX
OUT OUT
OPTICAL COAXIAL
CENTER SURROUND BACK
SURROUND
FRONT
L
L
R
R
LR
HDMIANTENNA
SPEAKERS
SYSTEM CONTROL
FRONT
L
R
SS-MSP7500
L
SS-MSP7500
R
L
R
DIGITAL
(ASSIGNABLE)
DC5V
0.7AMAX
DMPORT
SATIN
SAT
IN
DVDIN BD IN OUT
AM
Y
P
B
/
C
B
COMPONENTVIDEO
OUT
IN
P
R
/
C
R
DVD
IN
VIDEO1
IN
MONITOR
OUT
SA-CD
/
CD
/
CD-R
VIDEO1
IN
TV
TV
AUDIO
IN
VIDEO
IN
SAT
AUDIO
OUT
AUDIO
OUT
VIDEO
OUT
VIDEO
OUT
IN
OPTICAL
AUDIO
IN
VIDEO
IN
SUBWOOFER
MONITOR
AUDIO
IN
VIDEO
IN
BD
SAT
IN
DVD
IN
DCSV
50mAMAX
OUT OUT
OPTICAL COAXIAL
CENTER SURROUND BACK
SURROUND
FRONT
L
L
R
R
LR
HDMIANTENNA
SPEAKERS
SYSTEMCONTROL
SURROUND
LR
SPEAKERS
SS-SRP7500
SS-SRP7500
A
A
English
This Quick Setup Guide describes how to connect a DVD player, Blu-ray disc player,
satellite tuner or set-top box, TV, speakers and subwoofers so that you can enjoy
multi channel surround sound. Refer to the operating instructions supplied with the
receiver for details.
The illustrations in the guide designate speakers as
A
through
I
.
A
Front speaker (left)
B
Front speaker (right)
C
Center speaker
D
Surround speaker (left)
E
Surround speaker (right)
F
Surround back speaker (left)
G
Surround back speaker (right)
H
Subwoofer
I
Subwoofer
1: Installing the speakers
The illustration above shows an example of seven speakers and two subwoofers
confi guration. Refer to the operating instructions supplied with the receiver.
About speaker placement
The front speakers, center speaker and subwoofers are magnetically shielded to allow
it to be installed near a TV set. However, as the surround and surround back speakers
are not magnetically shielded, we recommend that you place them slightly further
away from a TV set.
2: Connecting the speakers and subwoofers
The illustrations above show how to connect the speakers. Before you connect the
speakers, check the speaker label on the rear panel of the speakers for the speaker
type.
For details, refer to the operating instructions supplied with the receiver.
About speaker cords
• Use the long speaker cords to connect the surround and surround back speakers and
the short speaker cords to connect the front speakers.
• Connect the cord attached with the “CENTER” labels to the center speaker.
• Use the red and black speaker cords to connect the subwoofers.
Red wire is positive (+) in polarity and should be connected to the positive (+)
speaker terminal.
Connect black wire to the negative (−) speaker terminal.
About speaker jacks
• Connect the
3
jack to the
3
jack of the receiver and connect the
#
jack to the
#
jack of the receiver.
• Refer to the illustration above for details of connecting speaker cords.
3: Connecting other components
This is an example of how to connect this receiver and your components. Refer to
step 3 and 4 of “Getting started” of the operating instructions supplied with this
receiver for details on other connections and other components.
Español
Esta guía de instalación rápida describe cómo conectar un reproductor de DVD, un
reproductor de discos Blu-ray, un sintonizador vía satélite o un decodifi cador, un
televisor, los altavoces y altavoces potenciadores de graves para que pueda disfrutar
del sonido envolvente multicanal. Consulte el manual de instrucciones suministrado
con el receptor para obtener más información.
En las ilustraciones de la guía, los altavoces se identifi can de
A
a
I
.
A Altavoz frontal (izquierdo)
B Altavoz frontal (derecho)
C Altavoz central
D Altavoz de sonido envolvente (izquierdo)
E Altavoz de sonido envolvente (derecho)
F Altavoz de sonido envolvente posterior (izquierdo)
GAltavoz de sonido envolvente posterior (derecho)
H Altavoz potenciador de graves
I Altavoz potenciador de graves
1: Instación de los altavoces
La ilustración anterior muestra un ejemplo de confi guración de un sistema
de seite altavoces y dos altavoces potenciadores de graves. Consulte el
manual de instrucciones suministrado con el receptor.
Sobre la ubicación del altavoz
Los altavoces frontales, el altavoz central y los altavoces potenciadores de graves
están protegidos magnéticamente para que puedan instalarse cerca de un televisor. Sin
embargo, debido a que los altavoces de sonido envolvente y los altavoces de sonido
envolvente posteriores no están protegidos magnéticamente, se recomienda situarlos a
una distancia considerable del televisor.
2: Conexión de los altavoces y los altavoces
potenciadores de graves
Las ilustraciones que aparece más arriba muestra cómo conectar los altavoces. Antes
de conectarlos, compruebe la etiqueta del altavoz situada en el panel posterior de los
mismos para conocer el tipo de altavoz.
Consulte el manual de instrucciones suministrado con el receptor para obtener
información más detallada.
Acerca de los cables de los altavoces
• Utilice los cables largos de conexión de altavoces para conectar los altavoces de
sonido envolvente y los altavoces de sonido envolvente posteriores, y los cables
cortos de conexión de altavoces para conectar el altavoz frontal y el central.
• Conecte el cable con las etiquetas “CENTER” al altavoz central.
• Utilice los cables de altavoz rojo y negro para conectar los altavoces potenciadores
de graves.
El cable rojo corresponde a la polaridad positiva (+) y deberá conectarse al terminal
positivo (+) del altavoz.
Conecte el cable negro al terminal negativo (−) del altavoz.
Acerca de las tomas de los altavoces
• Conecte la toma
3
a la toma
3
del receptor, y conecte la toma
#
a la toma
#
del
receptor.
• Consulte la ilustración anterior para obtener más información sobre cómo conectar
los cables de los altavoces.
3: Conexión de otros componentes
Este es un ejemplo de cómo conectar este receptor a los componentes. Consulte el
paso 3 y 4 de “Procedimientos iniciales” del manual de instrucciones suministrado
con el receptor paras obtener más información sobre cómo realizar otras conexiones y
sobre otros componentes.
DIGITAL
(ASSIGNABLE)
TV
AUDIO
OUT
VIDEO
OUT
IN
OPTICAL
SUBWOOFER
MONITOR
SAT
IN
DVD
IN
DCSV
50mA MAX
OUT OUT
OPTICAL COAXIAL
CENTER SURROUND BACK
SURROUND
FRONT
L
L
R
R
LR
SPEAKERS
SYSTEM CONTROL
L
R
DIGITAL
(ASSIGNABLE)
DC5V
0.7AMAX
DMPORT
SATIN
SAT
IN
DVDIN BDIN OUT
AM
Y
P
B
/
C
B
COMPONENTVIDEO
OUT
IN
P
R
/
C
R
DVD
IN
VIDEO1
IN
MONITOR
OUT
SA-CD
/
CD
/
CD-R
VIDEO1
IN
TV
TV
AUDIO
IN
VIDEO
IN
SAT
AUDIO
OUT
AUDIO
OUT
VIDEO
OUT
VIDEO
OUT
IN
OPTICAL
AUDIO
IN
VIDEO
IN
SUBWOOFER
MONITOR
AUDIO
IN
VIDEO
IN
BD
SAT
IN
DVD
IN
DCSV
50mAMAX
OUT OUT
OPTICAL COAXIAL
CENTER SURROUND BACK
SURROUND
FRONT
L
L
R
R
LR
HDMIANTENNA
SPEAKERS
SYSTEMCONTROL
SUBWOOFER
AUDIO
IN
SYSTEM
CONTROL
SPEAKERS
IN
SUBWOOFER
SS-WP7500
SS-WP7500
SUBWOOFER ONLY FOR SS-WP7500
SYSTEM
CONTROL
SUBWOOFER SPEAKERS
ONLYFOR
STR-KM5500/7500/8500
AUDIO
IN IN
SUBWOOFERONLYFOR SS-WP7500
SUBWOOFER
A
Speaker cord/Cables de los altavoces
B
Monaural audio cord/Cable de audio monoaural
C
System control cable/Cable de control del sistema
10 mm
Note
Be sure to change the
factory setting of the
DVD input button on the
remote so that you can
use the button to control
your DVD player. For
details, see “Changing
button assignments” in the
operating instructions of
the receiver.
Nota
Asegúrese de cambiar
el ajuste de fábrica del
botón de la entrada DVD
del mando a distancia
para que pueda utilizar el
botón para controlar el
reproductor de DVD. Para
más detalles, consulte
“Cambio de función en los
botones” en las manual de
instrucciones del receptor.
DIGITAL
(ASSIGNABLE)
SAT IN DVD I N OUT
AM
TV
IN
SAT
IN
DVD
IN
DCSV
50mA M AX
OUT OUT
OPTICAL COAXIAL
ANTENNA
SYSTEM CONTROL
D
D
D
DIGITAL
OPTICAL
BD IN
HDMI
L
R
DIGITAL
(ASSIGNABLE)
DC5V
0.7AMAX
DMPORT
SATIN
SAT
IN
DVDIN BDIN OUT
AM
Y
P
B
/
C
B
COMPONENTVIDEO
OUT
IN
P
R
/
C
R
DVD
IN
VIDEO1
IN
MONITOR
OUT
SA-CD
/
CD
/
CD-R
VIDEO1
IN
TV
TV
AUDIO
IN
VIDEO
IN
SAT
AUDIO
OUT
AUDIO
OUT
VIDEO
OUT
VIDEO
OUT
IN
OPTICAL
AUDIO
IN
VIDEO
IN
SUBWOOFER
MONITOR
AUDIO
IN
VIDEO
IN
BD
SAT
IN
DVD
IN
DCSV
50mAMAX
OUT OUT
OPTICAL COAXIAL
CENTER SURROUNDBACK
SURROUND
FRONT
L
L
R
R
LR
HDMIANTENNA
SPEAKERS
SYSTEMCONTROL
OPTICAL
D
E
D
HDMI cable/Cable HDMI
E
Optical digital cord/Cable digital óptico
DVD player/
Reproductor de DVD
TV/Televisor
Satellite tuner or Set-top box/
Sintonizador vía satélite o
decodifi cador
Blu-ray disc player/
Reproductor de discos
Blu-ray
A
A
C
B
Cords used for connection (supplied)/
Cables utilizados para la conexión (suministrada)
Cords used for connection (not supplied)/
Cables utilizados para la conexión (no suministrado)
4138610111_DDW7500_GBES_A3.indd 14138610111_DDW7500_GBES_A3.indd 1 3/19/2009 8:44:23 AM3/19/2009 8:44:23 AM
5: Calibrating the speaker settings automatically
/
5: Calibración automática de los ajustes del
altavoz
MULTISTEREOGAME
NIGHTMODE
PHONES
MOVIE
A.F.D.
AUTOCAL MIC
VIDEO
LAUDIOR
VIDEO2 IN
MASTERVOLUMEINPUTSELECTOR
MUSIC
?/1
AUTO CAL MIC
?
/
1
123
46
78
0/10
ENTER
9
SYSTEM STANDBY
TV INPUT
SLEEP
DMPORT
VIDEO1 VIDEO2 BD DVD
2CH A.F.D. MOVIE MUSIC
CLEAR
DISPLAY
TV VOL
MASTER VOL
DVD/BD
MENU
AUTO CAL
D.TUNING
D.SKIP
THEATER
SAT TV SA-CD/CD TUNER
?/1
5
>10
O
RETURN/EXIT
TV
?/1
AV
?/1
TOOLS/
OPTIONS
MENU/HOME
AMP MENUMEMORY
MUTING
Input buttons/
Botones de introducción
AUTO CAL
AMP MENU
English
4: Connect all power cords last
Connect the AC power cord to a wall outlet.
Refer to “Connecting the AC power cord” in the operating instructions supplied with the receiver.
5: Calibrating the speaker settings automatically
You can set up the speakers to obtain the sound you want from all connected speakers automatically by using the Auto Calibration function. The Auto Calibration function will:
• Check the connection between each speaker and the receiver.
• Adjust the speaker level.
•
Measure the distance of each speaker from your listening position.
1 Connect the supplied optimizer microphone to the AUTO CAL MIC jack on the receiver.
2 Set up the optimizer microphone.
Place the optimizer microphone at your listening position.You can also use a stool or tripod so that the optimizer microphone remains at the same height as your ears.
3 Press AMP MENU, then press AUTO CAL.
The Auto Calibration function starts.
For details on the Auto Calibration function, refer to step 7 of "Getting started" of the operating instructions supplied with this receiver.
Notes
• If there are any obstacles in the path between the optimizer microphone and the speakers, the calibration cannot be performed correctly. Remove any obstacles from the measurement area to avoid measurement error.
• The Auto Calibration function cannot detect the subwoofer. Therefore, all subwoofer settings will be maintained.
6: Setting up other components
You should set up each component so that the sound is output from the speakers correctly when you playback a connected component. Refer to the operating instructions supplied with each component.
Note
If no digital signal is input through the COAXIAL or OPTICAL jack on the receiver, “NO INPUT” appears on the display. This is not a malfunction.
After the setting
The receiver is now ready to use. Press the input button on the remote to select the component you want to play back. Refer to the operating instructions supplied with the receiver for details.
Español
4: Conecte todos los cables de alimentación en último lugar
Conecte el cable de alimentación de ca a una toma de pared.
Consulte el apartado “Conexión del cable de alimentación de ca” del manual de instrucciones suministrado con el receptor.
5: Calibración automática de los ajustes del altavoz
Puede instalar los altavoces para obtener automáticamente el sonido que desee a través de todos los altavoces conectados mediante la función de calibración automática. La función de calibración automática:
• Compruebe las conexiones entre cada altavoz y el receptor.
• Ajuste el nivel del altavoz.
• Calculará la distancia existente entre cada altavoz y la posición de escucha.
1 Conecte el micrófono optimizador suministrado a la toma AUTO CAL MIC del receptor.
2 Ajuste el micrófono optimizador.
Coloque el micrófono optimizador en su posición de escucha. Puede utilizar también una banqueta o trípode para que el micrófono optimizador quede a la altura
de los oídos.
3 Pulse AMP MENU y, a continuación, AUTO CAL.
Se iniciará la función de calibración automática.
Para obtener más información sobre la función de calibración automática, consulte el paso 7 de “Procedimientos iniciales” del manual de instrucciones suministrado con el receptor.
Notas
• Si hay obstáculos entre el micrófono optimizador y los altavoces, es posible que la calibración no se lleve a cabo correctamente. Retire los obstáculos de la zona de medición para evitar errores.
• La función de calibración automática no puede detectar el altavoz potenciador de graves. Por lo tanto, todos los ajustes del altavoz potenciador de graves se mantendrán.
6: Confi guración de otros componentes
Es necesario confi gurar cada componente para que el sonido se emita correctamente a través de los altavoces al reproducir un componente conectado. Consulte el manual de instrucciones suministrado con cada
componente en cuestión.
Nota
Si no se recibe ninguna señal digital a través de la tomas COAXIAL u OPTICAL, aparecerá “NO INPUT” en la pantalla. No se trata de un fallo de funcionamiento.
Tras realizar el ajuste
El receptor está listo para utilizarse. Pulse el botón de introducción del mando a distancia para seleccionar el componente que desee reproducir. Consulte el manual de instrucciones suministrado con el receptor
para obtener más información.
Optimizer microphone (supplied)/
Micrófono optimizador (suministrada)
4138610111_DDW7500_GBES_A3.indd 24138610111_DDW7500_GBES_A3.indd 2 3/19/2009 8:44:28 AM3/19/2009 8:44:28 AM
  • Page 1 1
  • Page 2 2

Sony HT-DDW7500 Quick start guide

Sony
Brand
Sony
Model
HT-DDW7500
Category
AV receivers
Type
Quick start guide

Sony HT-DDW7500 is a home audio system that can be used to enjoy multi-channel surround sound from various sources such as DVD players, Blu-ray disc players, satellite tuners, set-top boxes, TVs, and speakers. It has a variety of features that make it a great choice for home entertainment, including:

  • HDMI connectivity: The HT-DDW7500 has multiple HDMI inputs and outputs, which allows you to connect it to a variety of devices, such as TVs, DVD players, and Blu-ray disc players.
  • Optical digital input: The HT-DDW7500 also has an optical digital input, which allows you to connect it to devices that do not have HDMI outputs, such as older DVD players and CD players.
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers