Chieftec CBP-2131SAS Datasheet

Chieftec
Brand
Chieftec
Model
CBP-2131SAS
Category
HDD/SSD enclosures
Type
Datasheet
The listed specifications may be altered at any point in time without any pre-notice. Chieftec® is a registered trade mark. All other brands and/or logos are property of the respective owners.
Arena Electronic GmbH
Halskestraße 22 -26
DE-40880 Ratingen
Tel. +49 2102 56 0 77 - 0
Fax. +49 2102 56 0 77 – 99
Email: [email protected]
www.chieftec.eu
In this case you can trust!
BACKPLANE
CBP-2131SAS
Interface (HDD/SSD):
SATA I, SATA II, SATA III, SAS
Dimension (DxWxH):
207mm x 146mm x 86mm
Weight:
1,09 kg
Form Factor:
2x 5,25" bays for 3x SATA/SAS HDDs/SDDs (3,5“ or 2,5”)
Cooling:
70mm fan
Power Connector:
2x SATA
Data Interface (ext.):
3x SATA
Supported Raid-Level:
0, 1, and 5 (no Raid controller is included)
Special Features:
Fan Failure detection LED
Reset switch for buzzer alarm
Overheating LED
Up to 6Gbps data transfer rate (SATA III / SAS)
Scope of delivery:
SATA /SAS Backplane, 4x SATA cable (60cm), set of screws, User manual (engl.)
Warranty:
24 Month
Technical Data
Product
Accessories
Form Factor
2x 5,25" for 3x 3,5“ or 2,5“ HDDs/SSDs
Interface (HDD/SSD)
SATA I, SATA II, SATA III, SAS
Professional Data Backup
Hot Swap
Plug & Play compatible
Lock mechanism with key
Space saving
CBP-2131SAS – The new backplane CBP-2131SAS sets the standard with the
patented anti-vibration design. Like no other backplane makes it suitable for
diverse applications. The chassis is made of high quality aluminum and
requires only two 5.25" and provides space for three 3.5" or 2.5" hard drives or
SSDs. Supports both SATA I/II/III and SAS I/II.
features
  • Page 1 1

Chieftec CBP-2131SAS Datasheet

Chieftec
Brand
Chieftec
Model
CBP-2131SAS
Category
HDD/SSD enclosures
Type
Datasheet
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents