ENGLISH OPERATION MANUAL
JB SYSTEMS
®
1/13 LP3315 RGB LED PROJECTOR 15°
Thank you for buying this JB Systems
®
product. To take full advantage of all possibilities and for your own safety, please
read these operatinginstructions verycarefully before you start using thisunit.
FEATURES
This unit is radio-interference suppressed. This product meets the requirements of the current European and national
guidelines. Conformity has been established and the relevant statements and documents have been deposited by the
manufacturer.
This devicehas been designedto produce decorative effect lighting andis used in light showsystems.
RGB projector, based on 33highpower LEDs (11x Red, 11xGreen, 11xBlue)
Perfect forall kinds of architecturalapplicationsin houses, pubs, stores, discotheques,…
Very lowpower consumption, only 5 Watt
Beamangle: 15°
Can be used inany MR16 armature (same size asstandard halogen MR16 lamps)
Can beused in standard PAR16 projectors
To be used with a specialLED MANAGER power supply! (4wire 24Vac connection)
BEFORE USE
Before you start using this unit, please check if there’s no transportation damage. Shouldthere be any, donot use the
device and consult yourdealer first.
Important: This device left our factory in perfect condition and well packaged. It is absolutely necessary for the user to
strictly follow the safety instructions and warnings in this user manual. Any damage caused by mishandling is not
subject to warranty. The dealer will not accept responsibility for any resulting defects or problems caused by
disregardingthisusermanual.
Keep this booklet in a safe place for future consultation. If yousell the fixture, be sure to add this user manual.
Check thecontents:
Check that the carton contains the followingitems:
Operatinginstructions
LP3315 unit
SAFETY INSTRUCTIONS:
CAUTION: To reduce the risk of electricshock, do not remove the top cover. No user-
serviceable parts inside. Referservicingto qualified service personnel only.
The lightning flash with arrowhead symbol within the equilateral triangle is intended to alert the use or the
presence ofun-insulated “dangerous voltage” within the product’s enclosurethatmay be of sufficient magnitude
to constitute a risk of electric shock.
The exclamation point within the equilateral triangle is intended to alert the user to the presence of important
operation andmaintenance (servicing)instructions inthe literature accompanyingthis appliance.
This symbolmeans: indoor use only.
This symbolmeans: Read instructions.
To protect the environment, please try to recycle the packingmaterial as muchas possible.
To prevent fire or shock hazard, do notexpose this appliance to rain ormoisture.
To avoid condensation to be formed inside, allow the unit to adapt to the surrounding temperatures when bringing it
into a warm room after transport. Condense sometimes prevents the unit from working at full performance or may even
causedamages.
This unit is for indoor use only.
Don’t place metal objects or spill liquid inside the unit. Electric shock or malfunction may result. If a foreign object
enters the unit,immediately disconnectthe mains power.
Don’t cover any ventilationopenings asthis may result inoverheating.
Prevent use industy environments and clean the unit regularly.
Keep the unitaway from children.
Inexperienced persons should not operate this device.
CAUTION
ENGLISH OPERATION MANUAL
JB SYSTEMS
®
2/13 LP3315 RGB LED PROJECTOR 15°
Maximum save ambient temperature is 40°C. Don’t use this unit at higher ambient temperatures.
Make sure the area belowthe installationplace is free from unwanted persons during installation andservicing.
The electrical installation should be carried out by qualified personal only, according to the regulations for electrical
and mechanical safety inyourcountry.
Inthe event of serious operatingproblems, stop using the fixture andcontact yourdealer immediately.
The housing and the lensesmust bereplaced if they arevisibly damaged.
Due to safety reasonsit is prohibited to make unauthorizedmodifications to the unit.
Important: Never look directly into the light source! Don’t use the effect in the presence of persons suffering from
epilepsy.
ELECTRICAL INSTALLATION:
When youconnectthe LP-3315 to the LEDMANAGER, just connect thecorresponding colors:
SPECIFICATIONS
Input: 3x24Vac comingfrom the LED MANAGER
Powerconsumption: 5 Watt
Lamp: 33 LEDs (Red 11pcs, Green 11pcs, Blue 11pcs)
Beamangle: 15° (LP-3315)
Size: 50 × 26 mm
Weight: 0.2kg
Every informationis subject to change withoutprior notice
You can download the latest version of thisuser manual on our website: www.beglec.com
!!This LP-3315 canonly be usedtogether with the JB SYSTEMS
LED MANAGER !!
!!!DON’T CONNECT DIRECTLY TO230Vacor any ordinary 24Vdc powersupply !!!