RIKA Como Installing

Type
Installing

This manual is also suitable for

RIKA Pico

Below you will find brief product information for RIKA Pico to help you familiarize yourself with the device's capabilities and potential use cases. This information is based solely on the instruction manual and does not include any unfounded assumptions about the device's capabilities.

Key features:

  • Electronic room thermostat with timer function
  • Compatible with COMO, MEMO, PICO, REVO, and TOPO models
  • Easy installation by a specialist
  • Allows for precise temperature control and scheduling
  • Contributes to energy efficiency and comfort

Possible use cases:

  • Automated temperature control: Program the thermostat to automatically adjust the temperature based on your desired schedule, ensuring a comfortable indoor climate at all times.

RIKA Pico

Below you will find brief product information for RIKA Pico to help you familiarize yourself with the device's capabilities and potential use cases. This information is based solely on the instruction manual and does not include any unfounded assumptions about the device's capabilities.

Key features:

  • Electronic room thermostat with timer function
  • Compatible with COMO, MEMO, PICO, REVO, and TOPO models
  • Easy installation by a specialist
  • Allows for precise temperature control and scheduling
  • Contributes to energy efficiency and comfort

Possible use cases:

  • Automated temperature control: Program the thermostat to automatically adjust the temperature based on your desired schedule, ensuring a comfortable indoor climate at all times.
Montage Raumthermostat elektronisch Deutsch
(mit Zeitschaltfunktion) COMO, MEMO, PICO, REVO und TOPO _______________________
Installing the electronic room thermostat English
(with timer function) COMO, MEMO, PICO, REVO and TOPO
Page 5
Montage du thermostat d’ambiance électronique
Français (avec fonction horloge) COMO, MEMO, PICO, REVO et TOPO_ Page 7
Italiano
Montaggio del termostato elettronico
(con timer) COMO, MEMO, PICO, REVO e TOPO
Pagina 9
Page 3
Seite 5 von 12
The room thermostat should only be installed by a specialist. In
doing so the current safety regulations stipulated by the VDE
(Association of German Electrical Engineers) and the local power
supply companies are to be taken into account.
Before starting work disconnect the power supply and remove the
mains plug!
Installing the room thermostat
Use a suitable tool to
depress the opening button
and remove the cover from
your room thermostat.
Now connect the 2-pin
cable to positions 1 and 2
of the terminal block.
Remove the cable bridge
from the stove's interface
and connect the cable of
the room thermostat in its
place.
Seite 6 von 12
Stove settings
Set your desired heat output on the control panel.
Thermostat settings
Programme your desired switch-on/switch-off times and the desired
temperature in accordance with the manufacturer's instructions.
Function
Your pellet stove will continue to heat with the set heat output until
the desired room temperature or the programmed switching time is
reached. Upon reaching the desired temperature or switching time
the pellet stove switches off and "Standby" appears in the display. If
the room temperature falls below the set value or a new heating
time starts, the stove will switch back on again automatically.
Important:
If the stove is shut down manually (e.g. before reaching
the room temperature), "heat off" will appear in the display (refer to
the stove operating manual for more information). The stove is
thereby deactivated and the room thermostat function is inactive!
The heating procedure can only be resumed by pressing the
ON/OFF button.
Note: Automatic operation with the room thermostat particularly
requires consistent adherence to the cleaning intervals specified in
the operating manual.
Further information regarding commissioning can be inferred from
the manufacturer's operating manual.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12

RIKA Como Installing

Type
Installing
This manual is also suitable for

RIKA Pico

Below you will find brief product information for RIKA Pico to help you familiarize yourself with the device's capabilities and potential use cases. This information is based solely on the instruction manual and does not include any unfounded assumptions about the device's capabilities.

Key features:

  • Electronic room thermostat with timer function
  • Compatible with COMO, MEMO, PICO, REVO, and TOPO models
  • Easy installation by a specialist
  • Allows for precise temperature control and scheduling
  • Contributes to energy efficiency and comfort

Possible use cases:

  • Automated temperature control: Program the thermostat to automatically adjust the temperature based on your desired schedule, ensuring a comfortable indoor climate at all times.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages