Danze Orrington DC017118 Installation guide

Danze
Brand
Danze
Model
Orrington DC017118
Type
Installation guide

This manual is also suitable for

Danze Orrington DC017118 is a self-rimming lavatory that can be installed on the Orrington™ bathroom vanity or other bathroom vanities. It is made of vitreous china and features a sleek, contemporary design. The lavatory comes with a cutting template to ensure a precise fit, and it can be installed with either a 3/8" cold or hot water supply line and a 1 1/4" waste line. The Danze Orrington DC017118 lavatory is a stylish and functional addition to any bathroom.

Danze Orrington DC017118 is a self-rimming lavatory that can be installed on the Orrington™ bathroom vanity or other bathroom vanities. It is made of vitreous china and features a sleek, contemporary design. The lavatory comes with a cutting template to ensure a precise fit, and it can be installed with either a 3/8" cold or hot water supply line and a 1 1/4" waste line. The Danze Orrington DC017118 lavatory is a stylish and functional addition to any bathroom.

CALL 1-888-328-2383 OR VISIT WWW.DANZE.COM
© 2007 DANZE, INC. ALL RIGHTS RESERVED.
Español, página “Español - 1”
Français, page “Français - 1”
Pub No. IM-DC017118/08-07.01
Installation Instructions
Orrington™ Collection
Self-Rimming Lavatory
DC017118
2
IntroductIon to danze
Thank you for choosing Danze. We believe that elements in your bathroom should
awaken your senses like a splash of cool water. That’s what you will experience
with Danze.
Danze is a manufacturer of high quality decorative plumbing products for your
powder room, kitchen and bath. We offer a broad variety of products, designs &
finishes to suit your own particular needs. You can feel confident that our prod-
ucts will provide years of beauty and trouble-free performance.
danze VItreous chIna Products
Danze vitreous china products include toilets, bidets and lavatories. Our fixtures
reflect state-of-the-art design and engineering, and meet or exceed the most
rigorous plumbing codes throughout North America. Operating fixtures are
equipped with first quality valves and accessories to give you years of trouble-
free service.
Should you have questions about your Danze purchase, contact us at our website
www.danze.com, or call our technical service center during business hours at
888-328-2383.
Danze, Inc. reserves the right to make product specification changes and to
change or discontinue models without notice or obligation in North America.
Before InstallatIon
Check to make sure you have the following parts included in the lavatory
package:
(
A
) Lavatory
(
Z
) Cutting Template
(
V
) Welcome to Danze Kit
(W) Installation Instructions
(
X
) Homeowner Care Manual
Scissors Carpenter’s Level Pencil Saber Saw Adhesive Caulk
Putty Knife
Cloth
Rubbing Alcohol
Rubbing
Alcohol
tools requIred
3
4
4. Set the lavatory (A) into the proper position
on top of the Orrington™ bathroom vanity. Ad-
just the lavatory position to assure that there is
an even amount of wood showing around the
base of the lavatory (A).
5. Press down firmly on the lavatory rim to
distribute the adhesive.
6. Remove excess adhesive with a dry cloth.
7. Dampen a cloth with rubbing alcohol and
clean any unwanted adhesive caulk from the
lavatory surface as soon as lavatory (A) has been
placed.
8. Complete the faucet and drain connections
per the manufacturer’s recommendations.
For installation on other bathroom vanities
1. Use a level to assure that the slab or counter
top is perfectly flat in length and width.
InstallatIon InstructIons
For installation on the Orrington™ bathroom vanity
1. Install the Orrington™ bathroom vanity
according to the Installation Instructions
provided with the bathroom vanity.
2. Assemble faucet and drain (not included) in
lavatory (A) according to the manufacturer’s rec-
ommendations.
3. Apply a continuous bead of adhesive caulk
(not included) in the groove on the top surface
of the Orrington™ bathroom vanity to assure a
water tight seal between the lavatory (A) and
vanity. Spread adhesive caulk slightly with a put-
ty knife or other flat tool.
Product dImensIons
4”
8”
3 1/4”
2 7/8”
8 1/8”
17 3/8”
16 3/4”
23 3/4”
7 1/8”
2 7/8”
7 1/8”
12 3/4”
8”
11 1/4”
3/8” HOT
1 1/4” WASTE
3/8” COLD
FINISHED FLOOR
5
6
9. Press down firmly on the lavatory rim to
distribute the adhesive.
10. Remove excess adhesive with a dry cloth.
11. If there are any gaps visible between in the
adhesive caulk, work additional adhesive caulk
into the gap immediately. This will assure a
water tight seal between the lavatory (A) and
slab or counter top.
12. Dampen a cloth with rubbing alcohol and
clean any unwanted adhesive caulk from the
lavatory (A) and slab or counter top surface as
soon as lavatory (A) has been placed.
13. Complete the faucet and drain connections
per the manufacturer’s recommendations.
Please refer to Homeowner Care Manual for care and maintenance information.
BEIFTJWF!DBVML
2. Use a pencil to lightly mark the centerlines for
location of the lavatory (A) on the slab or counter
top.
3. Cut out template (Z) at dashed line. Line up
the centerline arrows on the template (Z) with the
centerlines marked on the slab or counter top.
Trace around the outside of the template (Z).
This line indicates where the outer edge of the
lavatory (A) will be after installation.
4. Cut off the outer rim of the template (Z) at
the solid line. Center the template (Z) inside the
marked line and trace the cutting line on the slab
or counter top.
5. Cut opening in slab or counter top on the
inside line.
6. Assemble faucet and drain (not included) in
lavatory (A) according to the manufacturer’s rec-
ommendations.
7. Apply two continuous beads of adhesive
caulk (not included) between the opening in the
slab or counter top and the marked line. Spread
adhesive caulk slightly with a putty knife or
other flat tool.
8. Set the lavatory (A) into the proper position
in the slab or counter top, using the outside line
as a guide.
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10

Danze Orrington DC017118 Installation guide

Danze
Brand
Danze
Model
Orrington DC017118
Type
Installation guide
This manual is also suitable for

Danze Orrington DC017118 is a self-rimming lavatory that can be installed on the Orrington™ bathroom vanity or other bathroom vanities. It is made of vitreous china and features a sleek, contemporary design. The lavatory comes with a cutting template to ensure a precise fit, and it can be installed with either a 3/8" cold or hot water supply line and a 1 1/4" waste line. The Danze Orrington DC017118 lavatory is a stylish and functional addition to any bathroom.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers

Other documents