Harbor Freight Tools 10,000 Ft./Meter Digital Measuring Wheel User manual

Brand: Harbor Freight Tools

Model: 10,000 Ft./Meter Digital Measuring Wheel

Type: User manual

Harbor Freight Tools 10,000 Ft./Meter Digital Measuring Wheel

This digital measuring wheel is a versatile tool for measuring distances up to 10,000 feet or meters. It features a large, easy-to-read display that shows measurements in both feet and meters. The wheel is also equipped with a telescoping handle that extends from 14-1/4" to 34" for comfortable use.

The measuring wheel is easy to use. Simply turn it on, clear the display, and start rolling. The wheel will automatically measure the distance traveled and display it on the screen. You can also store up to two measurements in memory for later recall.

Harbor Freight Tools 10,000 Ft./Meter Digital Measuring Wheel

Visit our website at: http://www.harborfreight.com

Email our technical support at: [email protected]

REV 14g

Owner’s Manual & Safety Instructions

Save This Manual Keep this manual for the safety warnings and precautions, assembly,

operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the

back of the manual near the assembly diagram (or month and year of purchase if product has no number).

Keep this manual and the receipt in a safe and dry place for future reference.

When unpacking, make sure that the product is intact

and undamaged. If any parts are missing or broken,

please call 1-888-866-5797 as soon as possible.

2007 by Harbor Freight Tools

No portion of this manual or any artwork contained herein may be reproduced in

any shape or form without the express written consent of Harbor Freight Tools.

Diagrams within this manual may not be drawn proportionally. Due to continuing

improvements, actual product may differ slightly from the product described herein.

Tools required for assembly and service may not be included.

Read this material before using this product.

Failure to do so can result in serious injury.

SAVE THIS MANUAL.

Page 2Item 96136

For technical questions, please call 1-888-866-5797.

SPECIFICATIONS

Display/Electronic Circuit Board Housing 1″ X 1-7/8″ (Digital)

On/Off Type Push Button

Unit Of Measure And Increments

Feet, 1″ to 9999 Feet 11 Inch (6 digits)

Meters, 1 CM to 9999.99 Meters

Power Source 2 - AAA, 1.5V Batteries (not included)

Measurement Clear Device Clear/Hold Button

Number Of Storing Values 2 with Push Button Selector

Handle Length

14-1/4″ to 34″ (Telescopic Adjustment)

Wheel Size 5-5/8″ Diameter

Save This Manual

You will need this manual for the safety warnings and precautions, assembly,

operating, inspection, maintenance and cleaning procedures, parts list and assembly

diagram. Keep your invoice with this manual. Write the invoice number on the inside

of the front cover. Write the product’s serial number in the back of the manual near the

assembly diagram, or write month and year of purchase if product has no number. Keep

this manual and invoice in a safe and dry place for future reference.

GENERAL AND SPECIFIC SAFETY RULES

WARNING!

READ AND UNDERSTAND ALL INSTRUCTIONS

Failure to follow all instructions listed below may result in serious

injury.

SAVE THESE INSTRUCTIONS

1. WARNING: To prevent leakage and/or explosion, position batteries in proper

polarity and do not install batteries of different types, charge levels or capacities

together.

2. Wear ANSI-approved safety goggles during use of this Digital Measure Wheel.

3. Keep this Measure Wheel out of the reach of children.

4. This Measure Wheel is for estimates only.

5. Do not mix old with new batteries.

6. Maintain labels and nameplates on the tool. These carry important information.

If unreadable or missing, contact Harbor Freight Tools for a replacement.

Page 3Item 96136

For technical questions, please call 1-888-866-5797.

UNPACKING

When unpacking, check to make sure that the item is intact and undamaged. If any

parts are missing or broken, please call Harbor Freight Tools at the number shown on

the cover of this manual as soon as possible.

ASSEMBLY INSTRUCTIONS

Note: This Digital Measure Wheel comes completely assembled. For additional information

regarding the parts listed in the following pages, refer to the Assembly Diagram on

page 6.

OPERATION INSTRUCTIONS

Accuracy can vary as much as 1″ in 50 feet. Because the wheel rolls on different

surfaces, both smooth and bumpy, the Measuring Wheel cannot be relied on to provide

precise measurements.

1. Before using this Digital Measure Wheel be sure the batteries are properly installed.

2. Turn on the Measure Wheel by pushing the ON/OFF Button located on the Display

Housing (23). Clear the Display Window (13) by pushing the Clear Button also located

on the Display Housing (23).

3. Four function buttons are located above the Display Window (13). From left to right

they are the:

a. On/Off Button. This is used to activate or de-activate the Measure Wheel.

b. Feet/Meter Button. Used to change from Meters to measuring in feet.

c. Hold/Clear Button. Press and release this Button if you want to store measurement

history, or press and HOLD this Button down to clear all measurements.

d. NO1/NO2 Button. Use this if you wish to change to another Display. You can

switch back and forth from one measurement to another.

4. Extend the Handle (1) by twisting either of the Handle Locks, (3) or (9) while holding

any of the three Shafts, Upper (2), Middle (7) or Lower (12) and Pulling. To collapse

the Handle (1), simply reverse the procedure. Be sure to retighten the Locked Pieces

before using or storing.

5. Clear any information from the Display Window (13) by pushing the Clear Button.

Place the Wheel (24) at the point where you wish to measure from, then roll the

Measure Wheel in the direction you wish to measure. When you stop, read the bright

green numbers displayed on the black background in the Display Window (13). Then

either store the information (see (3c) above), or clear the information (see (3c) above).

6. Change the batteries by removing the Battery Cover (21), lifting out the old batteries,

and replacing them with fresh new batteries. Replace the Battery Cover (21). Be

sure to properly dispose of the old batteries in normal trash. NEVER incinerate them.

7. Turn off the Digital Measure Wheel after using. If it will be stored for an extended

period, remove the batteries.

Page 4Item 96136

For technical questions, please call 1-888-866-5797.

INSPECTION, MAINTENANCE, AND CLEANING

1. WARNING! Make sure the Switch of the Measure Wheel is in its “OFF” position

before performing any inspection, maintenance, or cleaning procedures.

2. BEFORE EACH USE, inspect the general condition of the tool. Check for loose

screws, cracked or broken parts, and any other condition that may affect its safe

operation. If anything abnormal is noticed have the problem corrected before further

use. Do not use damaged equipment.

TROUBLESHOOTING

Problem Possible Causes Probable Solutions

Display will not

show in Display

Window

1. Batteries are bad or installed incorrectly.

2. On/Off Button not in ON position.

1. Check Batteries and replace them

if they are bad. Pull them out of the

Battery compartment and check for

correct polarity alignment.

2. Check the On/Off Button

Page 5Item 96136

For technical questions, please call 1-888-866-5797.

PARTS LIST

Part Description Q’ty

1 Handle 1

2 Upper Shaft 1

3 Handle Lock “A” 1

4 Middle Lock Head 1

5 Big Pipe Inner Sleeve 1

6 Middle Pipe Outer Sleeve 1

7 Middle Shaft 1

8 Middle Pipe Inner Sleeve 1

9 Handle Lock “B” 1

10 Small Lock Head 1

11 Small Pipe Outer Sleeve 1

12 Lower Shaft 1

13 Display Window 1

14 Bearing 2

15 Negative Battery Contact 1

Part Description Q’ty

16 Positive Battery Contact 1

17 Middle Battery Contact 1

18 Side Cover 1

19 Buttons Strip 1

20 Display and Circuit Board 1

21 Battery Cover 1

22 Middle Axis 1

23 Display Housing 1

24 Wheel 1

25 Wheel Axel Cover 1

27 Screw for Slide Cover 4

28 Axle Screw 1

29 Display Housing Lock Screw 1

PLEASE READ THE FOLLOWING CAREFULLY

THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND

ASSEMBLY DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE

MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY

OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS

TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF

THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY

STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN

BY CERTIFIED AND LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE BUYER

ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE

ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS

OR HER INSTALLATION OF REPLACEMENT PARTS THERETO.

Page 6Item 96136

For technical questions, please call 1-888-866-5797.

Record Product’s Serial Number Here:

Note: If product has no serial number, record month and year of purchase instead.

Note: Some parts are listed and shown for illustration purposes only, and are not

available individually as replacement parts.

ASSEMBLY DIAGRAM

Harbor Freight Tools 10,000 Ft./Meter Digital Measuring Wheel User manual

Brand: Harbor Freight Tools

Model: 10,000 Ft./Meter Digital Measuring Wheel

Type: User manual

Harbor Freight Tools 10,000 Ft./Meter Digital Measuring Wheel

Download PDF

report

Harbor Freight Tools 10,000 Ft./Meter Digital Measuring Wheel User manual

Harbor Freight Tools 10,000 Ft./Meter Digital Measuring Wheel User manual

Related papers

Other documents