AMX NXA-BEZ700-WH Installation guide
- Category
- Mounting kits
- Type
- Installation guide
This manual is also suitable for
Installation Guide
Mystique Style Bezel Kits
For full warranty information, refer to the AMX Instruction Manual(s) associated with your Product(s).
12/10
©2010 AMX. All rights reserved. AMX and the AMX logo are registered trademarks of AMX.
AMX reserves the right to alter specifications without notice at any time.
3000 RESEARCH DRIVE, RICHARDSON, TX 75082 • 800.222.0193 • fax 469.624.7153 • technical support 800.932.6993 • www.amx.com
93-2261-48 REV: A
The Modero 5" wall/flush mount Touch Panel (NXD-500i), the Modero 7" wall/
flush mount Touch Panel (NXD-700Vi),and the Modero 10" wall/flush mount
Touch Panel (NXD-1000Vi) are available in Mystique styled black or white by
ordering and installing the optional Mystique style bezel kits (FIG. 1). Easily
swap out the traditional silver bezel with a Mystique style bezel to complement
other Mystique style Touch Panels, R-Series Remotes and Metreau Keypads, as
well as match a variety of residential and business decors. All three varieties of
Mystique style bezels are available with one programmable button in landscape
mode.
Common Applications
The NXD-1000Vi can be used for a variety of applications and locations such as
entryways, bedrooms, bathrooms, kitchens, podiums and other surface mount
locations.
Removing and Installing the Touch Panel Bezel
Any of the Mystique Style bezels may be attached to a previously installed touch
panel. Because the device is installed against a wall, the bezel must be removed
carefully to prevent the two top prongs from being broken. To remove the bezel:
1. Gently lift up on the bezel from the bottom. Do NOT pull up from the sides
or the top.
2. Let the bezel fall forward from the top of the device and let it pivot from the
bottom.
3. Remove the bezel from the two bottom prongs.
4. When attaching the new bezel to the device, make sure to align the
Microphone, Light, and PIR Motion sensor locations on the device to their
respective openings on the bezel assembly.
FIG. 1 NXA-BEZ500-BL Black Bezel for the NXD-500i
Touch Panel Mystique Style Bezel Part Number
NXD-500i • NXA-BEZ500-BL, Black Bezel: FG2261-48
• NXA-BEZ500-WH, White Bezel: FG2261-49
NXD-700VI • NXA-BEZ700-BL, Black Bezel: FG2258-48
• NXA-BEZ700-WH, White Bezel: FG2258-49
NXD-1000Vi • NXA-BEZ1000-BL, Black Bezel: FG2259-48
• NXA-BEZ1000-WH, White Bezel: FG2259-49
Mystique Style Bezel Kit Specifications
Dimensions (HWD): • NXA-BEZ500: 4 1/8” x 5 5/8” x 5/16”
(10.48 cm x 14.29 cm x 0.79 cm)
• NXA-BEZ700: 5 7/8” x 7 7/8” x 3/4”
(14.92 cm x 20.00 cm x 1.91 cm)
• NXA-BEZ1000: 7 15/16” x 11 1/8” x 11/16”
(20.16 cm x 28.26 cm x 1.75 cm)
Weight:
• NXA-BEZ500: 0.05 lbs (22.68 grams)
• NXA-BEZ700: 0.15 lbs (68.04 grams)
• NXA-BEZ1000: 0.25 lbs (113.40 grams)
Other AMX Equipment:
• NXD-500i 5" Modero® Wall/Flush Mount Touch Panel
with Intercom (FG2261-02)
• NXD-700Vi 7" Modero® Wall/Flush Mount Touch Panel
with Intercom (FG2258-04K)
• NXD-1000Vi 10" Modero® Wall/Flush Mount Touch
Panel with Intercom (FG2259-04K)
Front Bezel Button
-
1
AMX NXA-BEZ700-WH Installation guide
- Category
- Mounting kits
- Type
- Installation guide
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
AMX NXD-700Vi User manual
-
AMX MST-431 Declaration of conformity
-
AMX MET-7 Declaration of conformity
-
AMX NMX-MM-1000 Declaration of conformity
-
-
AMX NXD-1000Vi User manual
-
-
-
-