The Cement Store Red Label Whiteout Troubleshooting guide

Brand: The Cement Store

Model: Red Label Whiteout

Type: Troubleshooting guide

The Cement Store Red Label Whiteout

This product is specially designed to allow you to rework all of our concrete sealers in The Cement Store Sealer System. It can be used to fix blushing, white spots, bubbles, sealer cracks, flaking, peeling, delamination, scratches, application imperfections, and rejuvenating.

Blushing: Blushing is a white, powdery film that can appear on the surface of concrete after it has been sealed. This is caused by the moisture in the concrete reacting with the sealer. Red Label Whiteout can be used to remove blushing and restore the concrete's natural color.

The Cement Store Red Label Whiteout

Blushing: Blushing is a white, powdery film that can appear on the surface of concrete after it has been sealed. This is caused by the moisture in the concrete reacting with the sealer. Red Label Whiteout can be used to remove blushing and restore the concrete's natural color.

THE CEMENT STORE'S SEALER SYSTEM®

GREEN LABEL

WEAR COAT

BLACK LABEL

WEAR COAT

WATER BASED

SEALER WAS USED

WHAT TYPE OF SEALER WAS APPLIED BEFORE?

SEALER MUST

BE REMOVED

OIL STAINS

WASH SURFACE

REPAIR

BLUSHING, FLAKING

WHITE SPOTS &

SCRATCHES

SURFACE

REPAIRED

READY TO APPLY

NEW WEAR COAT

ANTI SLIP

ADDITIVE

UNSEALED

OLD CONCRETE

SEALER REMOVED

APPLY

ADHESION COAT

UNSEALED

NEW CONCRETE

SOLVENT BASED

SEALER WAS USED

UNSEALED

OLD CONCRETE

S T O P

IF SURFACE

CRYSTALIZES OR

BECOMES GUMMY

GO TO:

SEALER MUST

BE REMOVED

SUPERIOR

PROTECTION

EASY APPLICATION

MAXIMUM

PROTECTION

EASY/MEDIUM APPLICATION

NOT SURE?

SOLVENT BASED

SEALER WAS USED

TURNS CLEAR

*For use on all concrete surfaces including:

! EXPOSED ! BROOM ! STAMPED ! PAVING STONES ! BRICK ! ALLAN

BLOCK ! CULTURED and NATURAL STONE ! PRECAST ! DECORATIVE

! RETAINING WALLS

BLUE LABEL is specifically designed to penetrate the surface of NEW or

UNSEALED concrete as well as condition the surface of SEALED concrete.

Creates an optimum grip or adhesion coat for BLACK and GREEN LABEL.

! Clear ! 1st Coat ! Adhesion Coat ! Conditioner

New Concrete !Unsealed Concrete !Cure & Seal

BLACK LABEL is specifically designed to seal your concrete surface and

provide a superior wear coat with high gloss.

BLUE LABEL + BLACK LABEL = SUPERIOR PROTECTION

Clear ! Sealed Concrete ! Wear Coat !Protection

High Gloss ! Add Anti Slip ! Add Tint

GREEN LABEL is like BLACK LABEL on steroids. Specifically designed to

seal your concrete surface and provide the ultimate wear coat with extra high

gloss. Highly recommended for all high traffic areas.

BLUE LABEL + GREEN LABEL = ULTIMATE PROTECTION

Clear ! Sealed Concrete ! Ultimate Wear Coat

Protection !Extra High Gloss !Add Anti Slip

RED LABEL is specially designed to allow you to rework all of our concrete

sealers in The Cement Store Sealer System.

Blushing !White Spots !Bubbles ! Sealer Cracks

Flaking !Peeling !Delamination !Scratches

Application Imperfections !Rejuvenating

THE BEST CONCRETE SEALER

SYSTEM ON THE PLANET…PERIOD

CementStoreSealer.com

The Cement Store Red Label Whiteout Troubleshooting guide

Brand: The Cement Store

Model: Red Label Whiteout

Type: Troubleshooting guide

The Cement Store Red Label Whiteout

Blushing: Blushing is a white, powdery film that can appear on the surface of concrete after it has been sealed. This is caused by the moisture in the concrete reacting with the sealer. Red Label Whiteout can be used to remove blushing and restore the concrete's natural color.

Download PDF

report

The Cement Store Red Label Whiteout Troubleshooting guide

The Cement Store Red Label Whiteout Troubleshooting guide

Related papers

Other documents