Kohler K-T10058-9-BN Installation guide

Type
Installation guide

This manual is also suitable for

Features
Brass construction
Front seal plate assembly
Handle assembly
Available with oblong handle
Codes/Standards Applicable
Specified model meets or exceeds the following:
ASME A112.18.1/CSA B125.1
SINGLE CONTROL FAUCET TRIM
K-T10058-9
ALSO K-T10067-9, K-T10069-9
Colors/Finishes
CP: Polished Chrome
Other: Refer to Price Book for additional colors/finishes
NA: None applicable
Accessories
NA: None applicable
Specified Model
Model Description Colors/Finishes
K-T10058-9 Transfer valve trim CP Other ____
K-T10067-9 Volume control trim CP Other ____
K-T10069-9 Thermostatic valve trim CP Other ____
Required Accessories
K-669-KS 3/4 Thermostatic valve NA
K-671-K 3/4 Volume control NA
K-679-KS 1/2 Thermostatic valve NA
K-681-K 1/2 Volume control NA
K-728-K 3/4 Transfer valve NA
Product Specification
The thermostatic valve faucet trim shall be made of brass construction. Faucet trim shall include front seal plate assembly and
handle assembly. Faucet trim shall be available with an oblong handle. Faucet trim shall be Kohler Model K-T____-9-____ and
valving shall be K____-____-NA.
OBLOTM
Page 1 of 2
1091247-4-
B
USA/Canada: 1-800-4KOHLER
(1-800-456-4537)
www.kohler.com
Installation Notes
Install this product according to the installation guide.
3-5/8"
(9.2 cm)
3-5/8"
(9.2 cm)
K-T10067/58K-T10069-9
1-1/4"
(3.2 cm)
2" (5.1 cm)
1-1/4"
(3.2 cm)
C
L
C
L
3-7/8"
(9.7 cm) D.
3-3/4" (9.5 cm)
Thick Wall
2-7/16" (6.2 cm)
Thin Wall
of Valve Inlet
6-3/8" (16.2 cm) D.
3-3/4" (9.5 cm)
Thick Wall
2-7/16" (6.2 cm)
Thin Wall
of Valve Inlet
2" (5.1 cm)
Product Diagram
OBLOTM
OBLOTM SINGLE CONTROL FAUCET TRIM
Page2of2
1091247-4-
B
  • Page 1 1
  • Page 2 2

Kohler K-T10058-9-BN Installation guide

Type
Installation guide
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI