2. Pleasant Hearth
  3. LS932-96
LS932-96

Pleasant Hearth LS932-96 Installation guide

  • Hello! I am an AI chatbot trained to assist you with the Pleasant Hearth LS932-96 Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
1
8 FT HEAVY-DUTY
LOG RACK
MODEL #LS932-96
Serial Number
Purchase Date
Questions, problems, missing parts? Before returning to your retailer, call our customer service
department at 1-877-447-4768, 8:30 a.m. – 4:30 p.m., CST, Monday – Friday.
ATTACH YOUR RECEIPT HERE
2
PACKAGE CONTENTS
PART DESCRIPTION QUANTITY
A Vertical End 2
B Horizontal Base Bar 4
C Spreader Bar 3
A
B
C
3
HARDWARE CONTENTS (shown actual size)
PREPARATION
SAFETY INFORMATION
WARNING
M8 x 75
Bolt
Qty. 12
Nut
Qty. 12
Please read and understand this entire manual before attempting to assemble, operate or install
the product.
Before beginning assembly of product, make sure all parts are present. Compare parts with package
contents list and hardware contents list. If any part is missing or damaged, do not attempt to assem-
ble the product.
Estimated Assembly Time: 15 minutes
Tools Required for Assembly (included): Wrench, Allen wrench.
• Do not allow children to play with or around log rack.
CAUTION
• Place rack on hard, dry surface.
• Protect rack from moisture.
AA BB
CC
DD
EE
Washer
Qty. 12
Wrench
Qty. 1
Allen Wrench
Qty. 1
4
ASSEMBLY INSTRUCTIONS
1. Attach two horizontal base bars (B) to one
vertical end (A) by inserting two M8 x 75
bolts (AA) through predrilled holes in vertical
end, spreader bar (C), and one end of each
horizontal base bar (B). Secure with washer
(CC) and nut (BB), then tighten with wrench
(DD) and Allen wrench (EE).
Repeat using second vertical end (A), second
spreader bar (C), and remaining horizontal base
bars (B).
1
BB
A
B
AA
CC
C
Hardware Used
M8 x 75
Bolt
Wrench
x 8
x 1
AA
DD
Allen Wrench
x 1
EE
Nut
x 8
BB
Washer
x 8
CC
CARE AND MAINTENANCE
• Keep log rack protected from elements.
• Do not attempt to overload rack.
• Clean with mild detergent as needed.
WARRANTY
If within one year from the date of original purchase, this item fails due to a defect in material or
workmanship, we will replace or repair at our option, free of charge. To order parts or to obtain
warranty service, call 1-877-447-4768, 8:30 a.m. – 4:30 p.m., CST, Monday – Friday. This warranty
does not cover defects resulting from improper or abnormal use, misuse, accident, or alteration.
Failure to follow all instructions in the owner’s manual will also void this warranty. The manufacturer
will not be liable for incidental or consequential damages. Some states do not allow the exclusion
or limitation of incidental or consequential damages, so the above limitation or exclusion of incidental
or consequential damages may not apply to you. This warranty gives you specic legal rights, and
you may also have other rights which vary from state to state.
5
ASSEMBLY INSTRUCTIONS
2. Attach the two assemblies by inserting two
M8 x 75 bolts through predrilled holes in
horizontal base bars (B), spreader bar (C),
and second set of horizontal base bars (B).
Secure with washers (CC) and nuts (BB).
Tighten with wrench (DD) and Allen wrench (EE).
2
AA
C
CC
BB
Hardware Used
M8 x 75
Bolt
Wrench
x 4
x 1
AA
DD
Allen Wrench
x 1
EE
Nut
x 4
BB
Washer
x 4
CC
6
PART DESCRIPTION PART NO.
A Vertical End 40-08-180
B Horizontal Base Bar 40-08-181
C Spreader Bar 40-08-182
AA M8x75 Bolt 40-09-898
BB Nut 40-09-899
CC Washer 40-09-900
DD Wrench 40-08-149
EE Allen Wrench 40-08-150
REPLACEMENT PARTS LIST
For replacement parts, call our customer service department at 1-877-4
47-4768, 8:30 a.m. – 4:30 p.m.,
CST, Monday – Friday.
Printed in China40-10-128
DD
EE
AA
BB
CC
A
B
C
/