Avaya Hardware or Software (Task Map) User manual

Avaya
Brand
Avaya
Model
Hardware or Software (Task Map)
Type
User manual

Avaya Hardware or Software (Task Map) is a comprehensive guide to the features and capabilities of your newly purchased Avaya product. Inside, you'll discover a wealth of information to help you get started, including:

  • Step-by-step instructions for installing and upgrading hardware and software.
  • Detailed explanations of how to configure your router, including security settings, line setup, and WAN protocol configuration.
  • Guidance on managing filters, statistics, MIB, and other tasks to optimize your network performance.
  • Troubleshooting tips for resolving common issues and maintaining your router.

Avaya Hardware or Software (Task Map) is a comprehensive guide to the features and capabilities of your newly purchased Avaya product. Inside, you'll discover a wealth of information to help you get started, including:

  • Step-by-step instructions for installing and upgrading hardware and software.
  • Detailed explanations of how to configure your router, including security settings, line setup, and WAN protocol configuration.
  • Guidance on managing filters, statistics, MIB, and other tasks to optimize your network performance.
  • Troubleshooting tips for resolving common issues and maintaining your router.
Part No.
114682-A Rev. C
Installing or Upgrading Hardware and Software
Bay Networks, Inc., Corporate Headquarters
4401 Great America Parkway, Santa Clara, CA 95054
8 Federal Street, Billerica, MA 01821
Installing
a New
Router
1. Read about new features, guidelines, known anomalies, and amendments to the
Bay Networks
®
documentation.
• Read Me First: Router Software 11.02 and Site Manager 5.02
• Release Notes for Router Software Version 11.02
• Release Notes for Site Manager Software Version 5.02
• Known Anomalies: Router Software 11.02 and Site Manager 5.02
• Release 11.02/5.02 Documentation Change Notice
2. Unpack and install the router, as described in the manual that came with the router.
3. Configure the router’s initial IP interface, install Site Manager software, create a pilot
configuration file, and boot the router with it.
• Quick-Starting Routers and BNX Platforms
or
Configuring Remote Access
4. Enhance the
pilot.cfg
file by defining the rest of the router’s interfaces.
• Configuring Routers
Upgrading
a Router
1. Read about new features, guidelines, known anomalies, amendments to the
documentation, and compatibility with previous releases.
• Read Me First: Router Software 11.02 and Site Manager 5.02
• Release Notes for Router Software Version 11.02
• Known Anomalies: Router Software 11.02 and Site Manager 5.02
• Upgrading Routers from Version 7-10.xx to Version 11.0
• Release 11.02/5.02 Documentation Change Notice
2. Install Site Manager software.
3. Install the router software.
4. Customize the router software image.
5. Back up the existing router software image and configuration file.
6. Prepare the router to accept the router software image.
7. Transfer the customized software image to the router.
8. Upgrade PROMs.
9. Boot the router with the customized software image.
10. Upgrade configuration files.
11. Upgrade Frame Relay circuits, if necessary.
12. Transfer script files to the router.
Part No.
114682-A Rev. C
2
Finding Information
After you install or upgrade a router, use the following tables to help locate
instructions in the documentation set for tasks you want to perform.
Manage Security
Restrict read/write access to a router.
Quick-Starting Routers and BNX Platforms
Configuring SNMP, RMON, BOOTP, DHCP, and RARP
Services
Create a security filter.
Quick-Starting Routers and BNX Platforms
Configuring Routers
Set a router to operate in secure mode.
Quick-Starting Routers and BNX Platforms
Enable and configure a firewall.
Configuring and Enabling BaySecure Firewall-1
Use Management Systems
Learn about Site Manager.
Using Site Manager Software
Learn about the Technician Interface.
Using Technician Interface Software
Use Technician Interface scripts.
Using Technician Interface Scripts
Write Technician Interface scripts.
Writing Technician Interface Scripts
Configure a Router (General Tasks)
Connect a router to Site Manager.
Configuring Routers --
“Using the Configuration Manager”
Configure the router’s console port to connect
the router to the Technician Interface.
Configuring Routers --
“Configuring a Connection to the
Technician Interface”
Specify administrative information, such as a
system name, contact, and location.
Configuring Routers --
“Specifying Administrative
Information”
Save configuration changes.
Configuring Routers --
“Implementing Configuration
Changes”
Transfer a file to the router (in local mode).
Configuring Routers --
“Implementing Configuration
Changes”
Reboot the router with a new file.
Configuring Routers --
“Implementing Configuration
Changes”
Look up Site Manager defaults. “Default Parameter Settings” appendix in each protocol
manual
Modify a configuration file.
Configuring Routers --
“Modifying Configurations with New
Link Modules”
Part No.
114682-A Rev. C
3
Set Up and Customize Lines
Change the default settings of Ethernet, FDDI,
and token ring lines.
Configuring Ethernet, FDDI, and Token Ring Services
Change the default settings of synchronous, E1,
T1, asynchronous, SMT, ATM DXI, HSSI,
MCT1, or MCE1 lines.
Configure multiline services.
Configuring WAN Line Services
Configure Circuits
Move, rename, or delete a circuit on a router.
Assign additional IP interfaces to a circuit.
Add protocols to or delete protocols from a
circuit.
Configuring Routers --
“Editing Circuits”
Configure the Circuit Resource Manager (CRM)
for ST2 lines.
Configuring IP Multicasting Services
Configure WAN Protocols
Enable and customize Frame Relay.
Add, edit, group, or delete permanent virtual
circuits (PVCs).
Configuring Frame Relay Services
Enable and customize SMDS.
Configuring SMDS
Enable and customize X.25.
Add, edit, or delete X.25 Network Service
Records.
Configuring X.25 Services
Enable and customize PPP.
Configuring PPP Services
Enable and customize asynchronous PPP.
Configuring PPP Services
Create or modify dial-on-demand line pools.
Create or edit dial-on-demand circuits.
Configuring Dial Services
Create dial backup line pools.
Modify dial backup lines and pool IDs.
Create or edit primary circuits and defaults.
Configuring Dial Services
Enable and customize RADIUS for a router
acting as a RADIUS client.
Configuring RADIUS Services
Part No.
114682-A Rev. C
4
Enable and Customize Network Protocols
AppleTalk
Configuring AppleTalk Services
APPN
Configuring APPN Services
ATM DXI
Configuring ATM DXI Services
ATM UNI
Configuring ATM Services
Bridging and the transparent bridge
Spanning tree
Source routing
Translation bridge
Configuring Bridging Services
BOOTP
Configuring SNMP, RMON, BOOTP, DHCP, and RARP
Services
Bisynch over TCP/IP (BOT)
Configuring BSC Transport Services
Data compression
Configuring Data Compression Services
DECnet
Configuring DECnet Services
DHCP
Configuring SNMP, RMON, BOOTP, DHCP, and RARP
Services
DLSw
Configuring DLSw Services
FTP
Configuring IP Utilities
IP routing protocols (BGP, EGP, OSPF, RIP,
NetBIOS)
Configuring IP Services
IP multicasting protocols
Configuring IP Multicasting Services
IPX
Configuring IPX Services
LLC
Configuring LLC Services
LNM
Configuring LNM Services
OSI
Configuring OSI Services
QLLC
Configuring X.25 Services
RARP
Configuring SNMP, RMON, BOOTP, DHCP, and RARP
Services
SDLC
Configuring SDLC Services
SNMP
Configuring SNMP, RMON, BOOTP, DHCP, and RARP
Services
Software encryption
Configuring Software Encryption
ST2
Configuring IP Utilities
TCP
Configuring IP Utilities
Telnet
Configuring IP Utilities
Part No.
114682-A Rev. C
5
VINES
Configuring VINES Services
XNS
Configuring XNS Services
Get Information on Events and Traps
Display event logs.
Read, filter, and find events.
Save event log files.
Reference all Fault, Warning, and Info events.
Event Messages for Routers and BNX Platforms
Display, filter, and save traps.
Managing Routers and BNX Platforms
Manage Filters, Statistics, MIB, and Other Tasks
Configure inbound traffic filters, protocol
prioritization, or outbound traffic filters.
Configuring Traffic Filters and Protocol Prioritization
Display data link layer and network layer
statistics.
Managing Routers and BNX Platforms -- “ Monitoring
Statistics”
View the Bay Networks MIB.
Managing Routers and BNX Platforms --
“Monitoring
Statistics”
Create or edit custom statistics screens.
Managing Routers and BNX Platforms
--
“Monitoring
Statistics”
Add screens to or remove them from the current
screen list.
Managing Routers and BNX Platforms
--
Monitoring
Statistics”
Display the contents of a volume.
Managing Routers and BNX Platforms
-- “Managing
Router Files”
Compact or format a memory card.
Managing Routers and BNX Platforms
-- “Managing
Router Files”
Manipulate the files on your router.
Managing Routers and BNX Platforms
-- “Managing
Router Files”
Display the Site Manager or router software
version.
Managing Routers and BNX Platforms
Boot the router.
Managing Routers and BNX Platforms
Reset the slot in a router.
Managing Routers and BNX Platforms
Ping a remote device.
Managing Routers and BNX Platforms
Remove protocols from or add them to the
router software image.
Modifying Software Images for Routers
Part No.
114682-A Rev. C
6
Service Router Hardware
Access the router interior.
Remove or install air flow modules.
Locate and determine the meaning of LEDs.
Depending on the router model, consult one of the
following books:
lnstalling and Maintaining BN Routers;
Installing and Maintaining ASN Routers and BNX
Platforms; Installing and Operating BayStack AN and ANH
Systems; Installing and Operating BayStack ARN Routers
Hot-swap the router hardware.
Installing and Maintaining BN Routers
Configure hardware modules.
Installing and Maintaining BN Routers
Get information about cables.
Cable Guide
Connect Routers in a Network
Select the software configuration option for
connecting your BayStack™ AN
®
or ANH™, or
ASN™ to the network.
Configuring Remote Access
or
Connecting ASN Routers
and BNX Platforms to a Network
Configure your UNIX workstation as a BOOTP
server.
Configuring Remote Access
or
Connecting ASN Routers
and BNX Platforms to a Network
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6

Avaya Hardware or Software (Task Map) User manual

Avaya
Brand
Avaya
Model
Hardware or Software (Task Map)
Type
User manual

Avaya Hardware or Software (Task Map) is a comprehensive guide to the features and capabilities of your newly purchased Avaya product. Inside, you'll discover a wealth of information to help you get started, including:

  • Step-by-step instructions for installing and upgrading hardware and software.
  • Detailed explanations of how to configure your router, including security settings, line setup, and WAN protocol configuration.
  • Guidance on managing filters, statistics, MIB, and other tasks to optimize your network performance.
  • Troubleshooting tips for resolving common issues and maintaining your router.
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents