Vestax VOM-QFO LE DX User manual

Category
Recording Equipment
Type
User manual

This manual is also suitable for

Congratulations on your purchase of the Vestax QFO LE DX. There have been instructions added
to the CONNECTION section in page 10. Please be sure to completely read this supplemental
instruction sheet together with the user's manual to use the QFO LE DX safely and obtain its best
performance.
The SUB PHONO/LINE select switch on
PGM2 is marked as the THRU/VINYL switch on
the QFO LE DX. (fig.1)
THRU :Input signal from LINE IN 2
isassigned to PGM 2
VINYL:Vinyl sound is assigned to PGM 2
THRU OUT located on the rear panel outputs
the vinyl sound as LINE. (LINE OUT) This is
used to send the control signals of software
control vinyl to computers. (fig.2 Rear panel)
LINE IN 1 located on the rear panel is input
connection for LINE signals. The signal will be
inputted to PGM 1.
fig.1
fig.2
Example of connection with a computer
DJ SOFTWARE START
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17

Vestax VOM-QFO LE DX User manual

Category
Recording Equipment
Type
User manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI