Zenith L15V36 Series User manual

Brand: Zenith

Model: L15V36 Series

Category: LCD TVs

Type: User manual

This manual is also suitable for

Operating Guide | Warranty

Model Numbers | L15V36, L20V36 | LCD TV

206-3922

RECORD YOUR MODEL NUMBER

(For future reference)

The model and serial number of your TV are located on the

back of the TV cabinet. For convenience, we suggest that

you record those numbers here:

MODEL NO._______________________________

SERIAL NO._______________________________

WARNING :

TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK).

NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the

presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magni-

tude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important

operating and maintenance (servicing) instructions in the literature accompanying the appliance.

WARNING :

TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.

NOTE TO CABLE/TV INSTALLER:

This reminder is provided to call the cable TV system installer’s attention to Article 820-40 of the National

Electric Code (U.S.A.). The code provides guidelines for proper grounding and, in particular, specifies that

the cable ground shall be connected to the grounding system of the building, as close to the point of the cable

entry as practical.

REGULATORY INFORMATION:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to

Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful inter-

ference when the equipment is operated in a residential installation. This equipment generates, uses and

can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual,

may cause harmful interference to radio communications. However, there is no guarantee that interference

will not occur in a particular installation. If this equipment does cause harmful interference to radio or televi-

sion reception, which can be determined by turning the equipment off and on, the user is encouraged to try

to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Any changes or modifications not expressly approved by the party responsible for compliance could void the

user’s authority to operate the equipment

CAUTION:

Do not attempt to modify this product in any way without written authorization from Zenith Electronics

Corporation. Unauthorized modification could void the user’s authority to operate this product. The respon-

sible party for this product’s compliance is :

Zenith Electronics Corporation, 2000 Millbrook Dr. Lincolnshire, IL 60069, USA

1-847-941-8000

WARNING

RISK OF ELECTRIC SHOCK

DO NOT OPEN

INTRODUCTION

206-3922

IMPORTANT SAFETY INSTRUCTIONS

Important safeguards for you and your new product

Your product has been manufactured and tested with your safety in mind. However, improper use can result

in potential electrical shock or fire hazards. To avoid defeating the safeguards that have been built into your

new product, please read and observe the following safety points when installing and using your new prod-

uct, and save them for future reference.

Observing the simple precautions discussed in this booklet can help you get many years of enjoyment and

safe operation that are built into your new product.

This product complies with all applicable U.S. Federal safety requirements, and those of the Canadian

Standards Association.

(Continued on next page)

1. Read Instructions

All the safety and operating instructions should be

read before the product is operated.

2. Follow Instructions

All operating and use instructions should be fol-

lowed.

3. Retain Instructions

The safety and operating instructions should be

retained for future reference.

4. Heed Warnings

All warnings on the product and in the operating

instructions should be adhered to.

5. Cleaning

Unplug this product from the wall outlet before clean-

ing. Do not use liquid cleaners or aerosol cleaners.

Use a damp cloth for cleaning.

6. Water and Moisture

Do not use this product near water - for example, near

a bath tub, wash bowl, kitchen sink, or laundry tub, in

a wet basement, or near a swimming pool.

7. Accessories, Carts, and Stands

Do not place this product on an unstable cart, stand,

tripod, bracket, or table. The product may fall, causing

serious injury to a child or adult, and serious damage

to the product. Use only with a cart, stand, tripod,

bracket, or table recommended by the manufacturer,

or sold with the product. Any mounting of the product

should follow the manufacturer’s instructions, and

should use a mounting accessory recommended by

the manufacturer.

8. Transporting Product

A product and cart combination should be moved

with care. Quick stops, excessive force, and uneven

surfaces may cause the product and cart combina-

tion to overturn.

9. Attachments

Do not use attachments not recommended by the

product manufacturer as they may cause hazards.

10. Ventilation

Slots and openings in the cabinet are provided for

ventilation and to ensure reliable operation of the

product and to protect it from overheating, and these

openings must not be blocked or covered. The open-

ings should never be blocked by placing the product

on a bed, sofa, rug, or other similar surface. This

product should not be placed in a built-in installation

such as a bookcase or rack unless proper ventilation

is provided or the manufacturer’s instructions have

been adhered to.

11. Power Sources

This product should be operated only from the type

of power source indicated on the marking label. If

you are not sure of the type of power supply to your

home, consult your product dealer or local power

company. For products intended to operate from bat-

tery power, or other sources, refer to the operating

instructions.

12. Power-Cord Polarization

This product is equipped with a three-wire grounding

type alternating-current line plug (a plug having one

blade wider than the other). This plug will fit into the

power outlet only one way. This is a safety feature. If

you are unable to insert the plug fully into the outlet,

contact your electrician to replace your obsolete out-

let. Do not defeat the safety purpose of the polarized

plug.

13. Power-Cord Protection

Power-supply cords should be routed so that they

are not likely to be walked on or pinched by items

placed upon or against them, paying particular atten-

tion to cords at plugs, convenience receptacles, and

the point where they exit from the product.

PORTABLE CART WARNING

206-3922

IMPORTANT SAFETY INSTRUCTIONS

14. Outdoor Antenna Grounding

If an outside antenna or cable system is connected

to the product, be sure the antenna or cable system

is grounded so as to provide some protection against

voltage surges and built-up static charges. Article

810 of the National Electrical Code (U.S.A.), ANSI/

NFPA 70 provides information with regard to proper

grounding of the mast and supporting structure,

grounding of the lead-in wire to an antenna dis-

charge unit, size of grounding conductors, location of

antenna-discharge unit, connection to grounding

electrodes, and requirements for the grounding elec-

trode.

15. Lightning

For added protection for this product (receiver) dur-

ing a lightning storm, or when it is left unattended

and unused for long periods of time, unplug it from

the wall outlet and disconnect the antenna or cable

system. This will prevent damage to the product due

to lightning and power-line surges.

16. Power Lines

An outside antenna system should not be located in

the vicinity of overhead power lines or other electric

light or power circuits, or where it can fall into such

power lines or circuits. When installing an outside

antenna system, extreme care should be taken to

keep from touching such power lines or circuits as

contact with them might be fatal.

17. Overloading

Do not overload wall outlets and extension cords as

this can result in a risk of fire or electric shock.

18. Object and Liquid Entry

Never push objects of any kind into this product

through openings as they may touch dangerous volt-

age points or short-out parts that could result in a fire

or electric shock. Never spill liquid of any kind on the

product.

19. Servicing

Do not attempt to service this product yourself as

opening or removing covers may expose you to dan-

gerous voltage or other hazards. Refer all servicing to

qualified service personnel.

20. Damage Requiring Service

Unplug this product from the wall outlet and refer ser-

vicing to qualified service personnel under the fol-

lowing conditions:

a. If the power-supply cord or plug is damaged.

b. If liquid has been spilled, or objects have fallen

into the product.

c. If the product has been exposed to rain or water.

d. If the product does not operate normally by following

the operating instructions. Adjust only those controls

that are covered by the operating instructions as an

improper adjustment of other controls may result in

damage and will often require extensive work by a

qualified technician to restore the product to its normal

operation.

e. If the product has been dropped or the cabinet has

been damaged.

f. If the product exhibits a distinct change in perfor-

mance.

21. Replacement Parts

When replacement parts are required, be sure the

service technician has used replacement parts spec-

ified by the manufacturer or have the same charac-

teristics as the original part. Unauthorized substitu-

tions may result in fire, electric shock, or other haz-

ards.

22. Safety Check

Upon completion of any service or repairs to this

product, ask the service technician to perform safety

checks to determine if the product is in proper operat-

ing condition.

23. Wall or Ceiling Mounting

The product should be mounted to a wall or ceiling

only as recommended by the manufacturer. The

product may slide or fall, causing serious injury to a

child or adult, and serious damage to the product.

24. Heat

The product should be situated away from heat

sources such as radiators, heat registers, stoves, or

other products (including amplifiers) that produce

heat.

Antenna Lead in Wire

Antenna Discharge Unit

(NEC Section 810-20)

Grounding Conductor

(NEC Section 810-21)

Ground Clamps

Power Service Grounding

Electrode System (NEC

Art 250, Part H)

Ground Clamp

Electric Service

Equipment

Example of Grounding According to National

Electrical Code Instructions

NEC - National Electrical Code

(Continued from previous page)

206-3922

INTRODUCTION

CONNECTIONS

BASIC

FUNCTIONS

CLOCK

SETTING

AUDIO /

VIDEO

SPECIAL

FUNCTION

INFORMATION

Safety Warnings 2

Important Safety Instructions 3

Controls 6

Remote Control:

Installing Batteries/ Operation 10

TV Overview 11

Kensington Security System 15

Antenna/Cable Connections 16

VCR Connections 18

External Equipment Connections 19

DVD Player Connections 20

DTV (Set-top Box) Connections 21

PC/Computer Connections 22

(use TV as a Monitor)

PC Mode Functions Check 24

PC Mode Adjustments 25

Turning the TV on 30

TV Mode Menus 31

Onscreen Menu Language 32

Finding/Erasing channels 33

Favorite Channel Memory 35

Video/Picture Setup 42

Audio/Sound Setup 45

Closed Captions 50

Key Lock 53

Parental Control 54

Auto Clock Setup 36

Manual Clock Setup 37

Off Timer Setup 38

On Timer Setup 39

Auto off 40

Sleep Timer Setup 41

Maintenance 57

Product Specifications 58

Troubleshooting Checklist 59

Your Zenith Limited Warranty Back cover

Before operating the

TV, please read this

manual carefully.

CONTENTS

INDEX

Controls

206-3922

Front of the

MONO DPM

STEREO

SAP

MONO DPM

SAP

STEREO

Remote Control Sensor

DPM Indicator

(L15V36 Only)

SAP Indicator

Mono Indicator

Stereo Indicator

Power/Standby indicator

Illuminates red in standby mode, Illuminates

green when the TV is turned on.

INTRODUCTION

206-3922

DC IN (15V)

ANT IN

+75 Ω

COMPONENT(480i/480p/720p/1080i)

VIDEO IN

DVD/DTV IN

AUDIO

RLVIDEO

Y L R

AUDIO(MONO)

DC 12V

ANT IN

+75 Ω

PC INPUT

COMPONENT(480i/480p/720p/1080i)

SOUND

VIDEO IN

DVD/DTV IN

AUDIO

RLVIDEO

Y L R

AUDIO(MONO)

Back of the

Audio/Video Input

- This manual mainly explains the features for the L15V36.

PC Input

PC sound Input

Antenna Input

DC 12V Input

DVD/DTV IN

(Component (480i/480p/720p/1080i),

AUDIO) Input

L15V36

L20V36

* Kensington

Security System

Connector

(Refer to P.15.)

DC 15V Input

206-3922

Controls

MONO DPM

STEREO

SAP

Side of the

S-VIDEO VIDEO

AUDIO

L / MONO

Side Control Panel

Side Connection Panel

Channel Buttons

Volume Buttons

vol

enter

on/off

video

/ I

Enter Button

Menu Button

TV·Video Button

On/Off Button

Headphone Jack

S-Video Input

Video Input

Audio Input

INTRODUCTION

206-3922

powermute

tv/video

multimedia

mts

fcr

vol

enter

123

456

789

vol

exit

audio

flashbkcc sleep

video

pip position

pip input

POWER

MTS

EXIT

VOLUME (

)

PAGE 49

PAGE 42

MUTE

NUMBERS

CHANNEL (

)

TV/VIDEO

Select: TV, Video 1, Video 2,

S-Video, Component,

RGB-PC (RGB-PC only

available for L15V36)

FCR

MULTIMEDIA

Select: TV, Component,

RGB-PC (RGB-PC only

available for L15V36)

AUDIO

L15V36 Only:

PIP

POSITION

PIP INPUT

PIP CHANNEL (

)

VIDEO

FLASHBK

: Press the FLASHBK button

to return to the last channel

you were watching.

Remote Control Buttons

PAGE 35

PAGE 16-23

PAGE 27-28

PAGE 45

PAGE 52

PAGE 41

SLEEP

Remote Control: Installing Batteries/Operation

206-3922

Make sure there are no

objects between the

remote control and its

sensor.

Don’t place the remote control

near a heater or in a damp

place. Dropping or hitting the

remote control may damage it.

Signals from the remote

control may be disturbed by

sunlight or other strong

light. In this case, darken

the room.

Notes For Using Remote Control

Pull the battery cover

upward in the direction

shown by the arrow

and remove it.

Insert the batteries

with correct polarity,

match "+" and "-".

Replace the battery

compartment cover.

- Install two AAA, 1.5V batteries. Don’t mix used batteries with new batteries.

- Remove batteries when you won’t use the remote control for a long time. Liquid leakage

from batteries may damage the remote.

Installing Batteries

MONO DPM

STEREO

DUAL

Remote Control

Sensor

powermute

tv/video

multimedia

mts

fcr

vol

enter

123

456

789

vol

exit

audio

flashbkcc sleep

video

pip position

pip input

TV Overview

206-3922

INTRODUCTION

Accessories

AC Adapter

PC Signal Cable PC Sound Cable

1.5V

Power Cord

Operating Guide

AAA

Batteries

Remote Control

powermute

tv/video

multimedia

mts

fcr

vol

enter

123

456

789

vol

exit

audio

flashbkcc sleep

video

pip position

pip input

Tie Bands

- Arrange the wires

with the tie bands.

L15V36 Only

- An optional wall mount is available for this TV, see your Zenith dealer.

For installation, follow the instructions provide with the optional wall mount.

Installation on the W

all

TV Overview

206-3922

* Caution: Please make sure to connect the TV to the AC power adapter before connecting the TV's power plug

to a wall power outlet.

a. Remove the connection panel cover as shown below.

b. Connect the antenna cable to the antenna input port on the TV.

c. Connect the AC adapter to the power input port on the TV.

d. Plug the power cord into the wall power outlet only after connecting the power cord to the AC

adapter first.

e. Reinstall the connection panel cover.

Connections

Notes

● If the TV feels cold to the touch, there may be a small “flicker” when turned on.

This is normal, there is nothing wrong with TV.

● Some dot defects may appear on the screen, appearing as tiny red, green or blue spots.

However,they will have no adverse effect on the monitor's performance.

● Avoid touching the LCD screen or holding your finger(s) against it for long periods of time.

Doing so may produce some temporary distortion effects on the screen.

INTRODUCTION

206-3922

* The connection panel is hidden behind the A/V cover.

a. Remove the cover.

b. Install wires as necessary.

c. Reinstall the cover. Align the holes on the TV back panel with the two tabs on the rear A/V cover

as shown.

e. Close cover.

- Thread, then pull the wires through the hole on the TV stand.

Rear

A/V Cover

ire Holders

TV overview

206-3922

- You can adjust the vertical angle of the TV between 3° and 12°.

Adjusting the

TV V

iewing

Angle

IN3

- The TV can be conveniently swiveled on its stand 30 degrees to the left or right to provide the

optimum viewing angle.

Swivel Stand

STERE

INTRODUCTION

Kensington Security System

206-3922

- The TV is equipped with a Kensington Security System connector on the back panel. Connect the

Kensington Security System cable as shown below.

- For the detailed installation and use of the Kensington Security System, refer to the user’s guide

provided with the Kensington Security System.

For further information, contact http://www.kensington.com, the internet homepage of the

Kensington company. Kensington sells security systems for expensive electronic equipment such as

notebook PCs and LCD projectors.

- Note: The Kensington Security System is an optional accessory.

Antenna/Cable Connections

206-3922

- For optimum picture quality, adjust antenna direction.

● Typical wall antenna jack used in apartment buildings, connect the antenna cable as shown below.

(Use the correct type of antenna cable for the type of wall antenna jack.)

Wall Connection Jack

Apartment Buildings

Antenna Jack

Bronze Wire

Turn clockwise to

tighten.

Antenna

Converter

300Ω Flat Wire

75Ω Round Cable

● This type of antenna is commonly used in single family dwellings.

UHF

Antenna

VHF Antenna

Antenna Jack

Bronze Wire

Turn clockwise to

tighten.

Antenna

Converter

300Ω Flat Wire

75Ω Round Cable

- If you have a 75Ω round cable, insert the bronze wire and then tighten the connection

nut. If you have a 300Ω flat wire, connect the twisted wire to the antenna converter and

then connect the converter to the antenna jack on the TV.

- When using 75Ω round cable, do not bend the bronze wire. It may cause poor picture

quality.

- In poor signal areas, to get better

picture quality, install a signal amplifi-

er to the antenna as shown to the

right.

- If signal needs to be split for two

TVs, use an antenna signal splitter

for connection.

Signal

Amplifier

UHF

VHF

Single Family Home

Connecting to an Inside

Antenna Setup

Connecting to an Outdoor

Antenna Setup

ANT IN

+75 Ω

COMPONENT(480i/480p

PBY

ANT IN

+75 Ω

COMPONENT(480i/480

PBY

ANT IN

+75 Ω

COMPONENT(480i/480

PBY

CONNECTIONS

206-3922

- After subscribing to a local cable TV service and installing a converter, you can watch cable TV programming.

- For further cable TV information, contact a local cable service provider.

Cable

TV Connections

Connections

Viewing Setup

a. Use the tv/video button on the remote control to select TV (Ant In.) or Video source,

depending on connection setup: 1 or 2.

- Connection 1: Set cable box switch to 3 or 4 and then tune TV to the same channel number.

- Connection 2: Select VIDEO source input to use Audio/Video In connections.

b. Select channels with the cable box.

VCR

(R) AUDIO (L) VIDEO

ANT IN

+75 Ω

PC INPUT

COMPONENT(480i/480p/720p/1080i)

SOUND

VIDEO IN

DVD/DTV IN

AUDIO

RLVIDEO

Y L R

AUDIO(MONO)

RF Cable

Cable Box Connection Panel

VCR Connection and Viewing Setup

206-3922

- In Video mode, TV automatically reverts to TV mode if the fcr button or flashbk buttons are pressed.

- See following pages to connect to other A/V external equipment to input jacks on the TV.

Connections

● Connect the audio/video output jacks on VCR to the corresponding input jacks on the TV.

Viewing Setup

Watching TV programs

- Turn the TV on and tune to a channel.

Watching VCR

a. Use tv/video button on the remote control to select TV (Ant In.) or Video source,

depending on connection setup: 1 or 2.

- Connection 1: Set VCR switch to 3 or 4 and then tune TV to the same channel number.

- Connection 2: Select Video 1 or 2 source input to use Audio/Video In connections.

b. Insert a video tape into the VCR and press the PLAY button.

Connecting a VCR

ANT IN

+75 Ω

PC INPUT

COMPONENT(480i/480p/720p/1080i)

SOUND

VIDEO IN

DVD/DTV IN

AUDIO

RLVIDEO

Y L R

AUDIO(MONO)

OUT

CH3 CH4

S-VIDEO

ANT IN

ANT OUT

(R) (L)

AUDIO VIDEO

Typical

Antennas

VCR Connection Panel

Direct

connection

CONNECTIONS

206-3922

External Equipment Connections

Connections

● Connect the audio/video output jacks on the external A/V equipment to the corresponding input jacks

on the TV.

Viewing Setup

Camcorder

Video Game set

tv/video

Video 1

● Turn on the external A/V equipment.

● Turn the TV on and use the tv/video button to select Video 1 or 2 source.

On Remote Control

atching External

A/V Source

PC INPUT PC

SOUND

VIDEO IN

RLVIDEO AUDIO(MONO)

AUDIO VIDEO

TV Connection Panel

External Equipment

Connection Panel

DVD Player Connections

206-3922

Connections

Viewing Setup

Component

● Turn on the DVD player.

● Turn the TV on and use tv/video button to select Component source.

● See DVD user's manual for operating instructions.

- Connect DVD/DTV output jacks to TV's COMPONENT (480i/480p/720p/1080i), Y, P

B, PR jacks.

Connect DVD/DTV audio output jacks to right and left input jacks on TV.

ANT IN

+75 Ω

PC INPUT

COMPONENT(480i/480p/720p/1080i)

SOUND

VIDEO IN

DVD/DTV IN

AUDIO

RLVIDEO

Y L R

AUDIO(MONO)

AUDIOYPB PR (L)

(R)

TV Connection Panel

DVD Connection Panel

TV INPUT Y PB PR

DVD OUTPUT Y

B-Y

R-Y

Note:

On Remote Control

tv/video

Page is loading ...

Zenith L15V36 Series User manual

Brand: Zenith

Model: L15V36 Series

Category: LCD TVs

Type: User manual

This manual is also suitable for

Download PDF

report

Zenith L15V36 Series User manual

This manual is also suitable for

Zenith L15V36 Series User manual

Related papers

Other documents