Faber 630006500 User manual

Faber
Brand
Faber
Model
630006500
Category
Cooker hoods
Type
User manual

This manual is also suitable for

Faber 630006500 is a decorative wall canopy rangehood with a sleek styling. It has a powerful 500 cfm motor for efficient removal of smoke and odors from your kitchen. The rangehood features halogen lights to illuminate your cooking surface and 3-speed slide controls for easy operation. Its dishwasher-safe grease filters are easy to clean, and it can be converted to ductless operation with the optional Ductless Conversion Kit (6098835).

Faber 630006500 is a decorative wall canopy rangehood with a sleek styling. It has a powerful 500 cfm motor for efficient removal of smoke and odors from your kitchen. The rangehood features halogen lights to illuminate your cooking surface and 3-speed slide controls for easy operation. Its dishwasher-safe grease filters are easy to clean, and it can be converted to ductless operation with the optional Ductless Conversion Kit (6098835).

wall canopy rangehood
sleek styling
500 cfm or 280 cfm motor
2 halogen lights
3 speed slide controls
dishwasher safe grease filters
convertible to ductless*
6” round duct
Size/Color/Model #
30 Stainless (NEW)
36 Stainless (NEW)
30 Stainless (NEW)
36 Stainless (NEW)
°
°
°
°
°
°
°
°
630006498
630006499
630006500
630006501
Designed to offer a high-end decorative
look while taking into consideration great
value. Traditional styling, standard features,
and solid performance make the Tender a
great choice in canopy rangehoods.
* it is highly recommended that
professional style cooking always be
vented to the outside.
Includes: • Lower Chimney with holes for duct-
ing • Ductless Diverter Assembly • Vent Grates
• Charcoal Filter
Ductless Conversion Kit
Stainless
620000649
Replacement Charcoal Filter
6093034
30” high, mounts to the wall beneath
the rangehood for a coordinated look
30” High Backsplash
30 x 30 Stainless
36 x 30 Stainless
620000095
620000096
24” high, mounts to the wall beneath
the rangehood for a coordinated look
24” High Backsplash
30 x 24 Stainless
36 x 24 Stainless
6098835
6098815
High Ceiling Chimney Kit
One 39” upper chimney to replace 21
10/16” upper chimney that came with hood
Stainless 620000648
280 CFM models
500 CFM models
Tender
traditionally styled value rangehood
Decorative Collection
NEW MODEL - 500 AND 280 CFM AVAILABLE
p.o. box 435 • Wayland, MA 01778 • tel: (508) 358-5353 • fax: (508) 358-5730 • e-mail: [email protected] • www.faberonline.com
a
c
c
e
s
s
o
r
i
e
s
Dimensional Diagrams
36” Ducted
30” Ducted
For ducted installations
the chimneys are adjustable and
designed to meet varying ceiling
heights between 7’ 9 2/16” and 9’
11 2/16” depending on the distance
between the bottom of the hood
and the cooktop (distance x in the
ducted diagram).
For shorter ceilings, have
the chimney cover(s) cut at a sheet
metal shop. For higher ceiling
installations, the High Ceiling
Chimney Kit includes a new 39”
upper chimney which would replace
the 21 10/16” upper chimney that
came with the hood.
Note: If 24” or 30” High Backsplash is being installed, the distance between the bottom of the hood and the cooktop (distance x in diagram) is equal
to the height of the Backsplash.
Ducted
* it is highly recommended that
professional style cooking always be
vented to the outside.
WARNING! Product specications are subject to change without notication. Consult the installation instructions before you begin installing this rangehood.
Pre-Planning Your Installation - Important: Consult the installation
instructions before you begin installing this rangehood.
Ductless Installations*
For installations where ductwork is impos-
sible or highly impractical, a Ductless
Conversion Kit is available. A charcoal
filter, which attaches under the blower
assembly, absorbs smoke and odors. A
ductless diverter assembly directs the air
out to a lower chimney with vent grates cut
into the sides.
Make your ductrun as straight and short as possible. The ductrun should not exceed
35 equivalent feet if ducted with the required minimum of 6” round duct. Count 45º
angles as 3 feet, 90º elbows as 5 feet, and 90º at elbows as 12 feet.
For best results, use no more than three 90° elbows. Make sure that there is a
minimum of 24” of straight duct between elbows if more than one is used. Do
not install two elbows together. If you must elbow right away, do it as far away
from the hood’s exhaust opening as possible.
Pre-Planning Your Installation - Important: Consult the installation instructions before you begin installing this rangehood.
Rev. 06/08
1” min
21 10/16
” max
22 1/16”
9
7/16”
36”
x
also consult cooktop
manufacturer's recommendation
upper
chimney
lower
chimney
canopy
x = distance from hood to cooktop
(varies depending on installation)
min - 24”, suggested max - 30”
cabinet base
19”
min & max ceiling height examples
x = 30"
min
8'
3 2/16
max
9'
11 2/16"
x = 28"
min
8'
1 2/16"
max
9'
9 2/16"
x = 26"
min
7'
11 2/16"
max
9'
7 2/16"
x = 24"
min
7'
9 2/16"
max
9'
5 2/16"
  • Page 1 1
  • Page 2 2

Faber 630006500 User manual

Faber
Brand
Faber
Model
630006500
Category
Cooker hoods
Type
User manual
This manual is also suitable for

Faber 630006500 is a decorative wall canopy rangehood with a sleek styling. It has a powerful 500 cfm motor for efficient removal of smoke and odors from your kitchen. The rangehood features halogen lights to illuminate your cooking surface and 3-speed slide controls for easy operation. Its dishwasher-safe grease filters are easy to clean, and it can be converted to ductless operation with the optional Ductless Conversion Kit (6098835).

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents