Maytag MEC7430W - 30 in. Electric Cooktop User manual

Category
Cookers
Type
User manual

This manual is also suitable for

Better Built With More Power
Features The Most Powerful Element Available
Frameless Shatter Resistant SmoothTop Ceramic Glass
g" 3200Watt SpeedHeat element
12" XL 2700W PowerCook Element
2X6" 1200 Watt elements
Element
In
Use Indicator Light
Hot Surface indicator
Colors: Black, White
Dimensions to be used for preliminary planning only not for construction purposes. Please visit
our
website for detailed and up to date features
and
dimensions
at
www.coastappliances.com
c:::::;;,ORST
~hDlesale
c::::::lPPLIRNCES
"/nnavatlve Praducts far Builders, Deslgnersli Harne
Owners"
30" Radiant Ceran Cooktop
MEC7430W
Shown Here
In
Black
Exterior Dimensions:
W 30" x H 3.75" x D 21.5"
Cut-out Dimensions:
W 29 1/16" x D
203/8"
Preliminary information-drawing & specs subject to change
GAS COOKTOPS
Pages 1-3
Pages 4-5
Pages 6
Page 6
Page 7
Page 8
Page 16
SAFETY
SURFACE COOKING
Installer: Please leave this manual with
this appliance.
Consumer: Please read and keep this
manual for future reference. Keep sales
receipt and/or cancelled check as proof of
purchase.
Model Number
–– –– –– –– –– –– –– –– ––
Serial Number
–– –– –– –– –– –– –– –– ––
Date of Purchase
______________________________
If you have questions, call:
1-800-688-9900 (U.S.A.)
1-800-688-2002 (Canada)
1-800-688-2080 ( U.S. TTY for
hearing or speech impaired)
(Mon.-Fri., 8 am-8 pm Eastern Time)
Internet: http://www.maytag.com
For service information, see page 7.
In our continuing effort to improve
the quality and performance of
our cooking products, it may be
necessary to make changes to
the appliance without revising
this guide.
®
GUIDE DE L’UTILISATEUR
BEFORE YOU CALL
WARRANTY
CARE & CLEANING
Form No. A/08/06 Part No. 8111P505-60 © 2006 Maytag Appliances Sales Co. All rights reserved. Litho U.S.A.
IMPORTANT SAFETY INSTRUCTIONS
1
Safety Instructions
Warning and Important Safety Instructions ap-
pearing in this guide are not meant to cover all
possible conditions and situations that may
occur. Common sense, caution, and care must
be exercised when installing, maintaining, or
operating the appliance.
Always contact your dealer, distributor, service
agent, or manufacturer about problems or con-
ditions you do not understand.
RECOGNIZE SAFETY SYMBOLS, WORDS,
LABELS
WARNING – Hazards or unsafe practices which
COULD result in severe personal injury or death.
CAUTION – Hazards or unsafe practices which
COULD result in minor personal injury.
WARNING
CAUTION
Read and follow all instructions before using
this appliance to prevent the potential risk of
fire, electric shock, personal injury or damage to
the appliance as a result of improper usage of
the appliance. Use appliance only for its in-
tended purpose as described in this guide.
To ensure proper and safe operation: Appli-
ance must be properly installed and grounded by
a qualified technician. Do not attempt to adjust,
repair, service, or replace any part of your appli-
ance unless it is specifically recommended in
this guide. All other servicing should be referred
to a qualified servicer. Have the installer show
you the location of the gas shut off valve and how
to shut it off in an emergency.
Always disconnect power to appliance before
servicing.
WARNING:
If the in-
formation in this manual is
not followed exactly, a fire or
explosion may result causing
property damage, personal
injury or death.
Do not store or use gasoline or
other flammable vapors and liq-
uids in the vicinity of this or any
appliance.
IF YOU SMELL GAS:
Do not try to light any appliance.
Do not touch any electrical
switch.
Do not use any phone in your
building.
Immediately call your gas
supplier from a neighbor’s
phone. Follow the gas supplier’s
instructions.
If you cannot reach your gas
supplier, call the fire
department.
Installation and service must be
performed by a qualified installer,
service agency or the gas supplier.
WARNING
Gas leaks may occur in your system and
result in a dangerous situation. Gas leaks
may not be detected by smell alone. Gas
suppliers recommend you purchase and
install an UL approved gas detector. In-
stall and use in accordance with the
manufacturer’s instructions.
To Prevent Fire or
Smoke Damage
CAUTION
NEVER leave any items on the cooktop.
The hot air may ignite flammable items
and may increase pressure in closed
containers which may cause them to
burst.
Be sure all packing materials are removed
from the appliance before operating it.
Keep area around appliance clear and free
from combustible materials, gasoline, and
other flammable vapors and materials.
If appliance is installed near a window,
proper precautions should be taken to pre-
vent curtains from blowing over burners.
Many aerosol-type spray cans are EXPLO-
SIVE when exposed to heat and may be
highly flammable. Avoid their use or stor-
age near an appliance.
Many plastics are vulnerable to heat. Keep
plastics away from parts of the appliance
that may become warm or hot. Do not leave
plastic items on the cooktop as they may
melt or soften if left too close to a lighted
surface burner.
To eliminate the hazard of reaching over
hot surface burners, cabinet storage should
not be provided directly above a unit. If
storage is provided, it should be limited to
items which are used infrequently and which
are safely stored in an area subjected to
heat from an appliance. Temperatures may
be unsafe for some items, such as volatile
liquids, cleaners or aerosol sprays.
WARNING
2
Save These Instructions for Future Reference
A faint gas odor may indicate a gas leak. If a
gas odor is detected, shut off the gas supply
to the cooktop. Call your installer or local gas
company to have the possible leak checked.
Never use a match or other flame to locate
a gas leak.
In Case of Fire
Turn off appliance and ventilating hood to
avoid spreading the flame. Extinguish flame
then turn on hood to remove smoke and odor.
Smother fire or flame in a pan with a lid or
cookie sheet.
NEVER pick up or move a flaming pan.
Do not use water on grease fires. Use baking
soda, a dry chemical or foam-type extin-
guisher to smother fire or flame.
NEVER leave children alone or unsupervised
near the appliance when it is in use or is still
hot.
NEVER allow children to sit or stand on any
part of the appliance as they could be injured
or burned.
Children must be taught that the appliance
and utensils on it can be hot. Let hot utensils
cool in a safe place, out of reach of small
children. Children should be taught that an
appliance is not a toy. Children should not be
allowed to play with controls or other parts of
the unit.
CAUTION:
NEVER store items of interest to children
in cabinets above an appliance. Children
climbing on the appliance to reach items
could be seriously injured.
Child Safety
NEVER heat an unopened container on the
surface burner. Pressure build-up may cause
container to burst resulting in serious per-
sonal injury or damage to the appliance.
Use dry, sturdy potholders. Damp potholders
may cause burns from steam. Dishtowels or
other substitutes should never be used as
potholders because they can trail across hot
surface burners and ignite or get caught on
appliance parts.
Always let quantities of hot fat used for deep
fat frying cool before attempting to move or
handle.
Do not let cooking grease or other flammable
materials accumulate in or near the appli-
ance, hood or vent fan. Clean hood frequently
to prevent grease from accumulating on hood
or filter. When flaming foods under the hood
turn the fan on.
NEVER wear garments made of flammable
material or loose fitting or long-sleeved ap-
parel while cooking. Clothing may ignite or
catch utensil handles.
Utensil Safety
Use pans with flat bottoms and handles that
are easily grasped and stay cool. Avoid using
unstable, warped, easily tipped or loose-
handled pans. Also avoid using pans, espe-
cially small pans, with heavy handles as they
could be unstable and easily tip. Pans that are
heavy to move when filled with food may also
be hazardous.
Be sure utensil is large enough to properly
contain food and avoid boilovers. Pan size is
particularly important in deep fat frying. Be
sure pan will accommodate the volume of
food that is to be added as well as the bubble
action of fat.
To minimize burns, ignition of flammable ma-
terials and spillage due to unintentional con-
tact with the utensil, do not extend handles
over adjacent surface burners. Always turn
pan handles toward the side or back of the
appliance, not out into the room where they
are easily hit or reached by small children.
Never let a pan boil dry as this could damage
the utensil and the appliance.
About Your
Appliance
Do not use the cooktop as a storage area for
food or cooking utensils.
Potentially hot surfaces include cooktop, and
areas facing the cooktop.
NEVER use this appliance as a space
heater to heat or warm a room. Doing so
may result in carbon monoxide poisoning
and overheating of the oven.
NEVER cover any slots, holes or pas-
sages with materials such as aluminum
foil. Doing so blocks air flow and may
cause carbon monoxide poisoning. Alu-
minum foil may also trap heat causing a
fire hazard.
NEVER obstruct the flow of combustion
and ventilation air by blocking the oven
vent or air intakes. Doing so restricts air to
the burners and may result in carbon mon-
oxide poisoning.
Cooking Safety
Always place a pan on a surface burner
before turning it on. Be sure you know which
knob controls which surface burner. Make
sure the correct burner is turned on and that
the burner has ignited. When cooking is com-
pleted, turn burner off before removing pan to
prevent exposure to burner flame.
Always adjust surface burner flame so that it
does not extend beyond the bottom edge of
the pan. An excessive flame is hazardous,
wastes energy and may damage the appli-
ance, pan or cabinets above the appliance.
NEVER leave a surface cooking operation
unattended especially when using a high
heat setting or when deep fat frying. Boilovers
cause smoking and greasy spillovers may
ignite. Clean up greasy spills as soon as
possible. Do not use high heat for extended
cooking operations.
3
Only certain types of glass, glass/ceramic,
ceramic or glazed utensils are suitable for
cooktop usage without breaking due to the
sudden change in temperature. Follow
manufacturer’s instructions when using glass.
This appliance has been tested for safe perfor-
mance using conventional cookware. Do not
use any devices or accessories that are not
specifically recommended in this guide. Do not
use eyelid covers for the surface units or
stovetop grills. The use of devices or accesso-
ries that are not expressly recommended in
this manual can create serious safety hazards,
result in performance problems, and reduce
the life of the components of the appliance.
Cleaning Safety
Turn off all controls and wait for appliance
parts to cool before touching or cleaning them.
Do not touch the burner grates or surrounding
areas until they have had sufficient time to
cool.
Clean appliance with caution. Use care to
avoid steam burns if a wet sponge or cloth is
used to wipe spills on a hot surface. Some
cleaners can produce noxious fumes if applied
to a hot surface.
IMPORTANT SAFETY INSTRUCTIONS, CONT.
Save These Instructions for Future Reference
Electrical Connection
Appliances which require
electrical power are
equipped with a
three-prong
grounding plug
which must be
plugged directly into a properly grounded
three-hole 120 volt electrical outlet.
Always disconnect power to appliance be-
fore servicing.
The three-prong grounding plug offers pro-
tection against shock hazards. DO NOT
CUT OR REMOVE THE THIRD GROUND-
ING PRONG FROM THE POWER CORD
PLUG.
If an ungrounded, two-hole or other type
electrical outlet is encountered, it is the
personal responsibility of the appliance
owner to have the outlet replaced with a
properly grounded three-hole electrical
outlet.
Important Safety Notice
and Warning
The California Safe Drinking Water and Toxic
Enforcement Act of 1986 (Proposition 65)
requires the Governor of California to publish
a list of substances known to the State of
California to cause cancer or reproductive
harm, and requires businesses to warn cus-
tomers of potential exposures to such sub-
stances.
Users of this appliance are hereby warned
that the burning of gas can result in low-level
exposure to some of the listed substances,
including benzene, formaldehyde and soot,
due primarily to the incomplete combustion of
natural gas or liquid petroleum (LP) fuels.
Properly adjusted burners will minimize in-
complete combustion. Exposure to these sub-
stances can also be minimized by properly
venting the burners to the outdoors.
IMPORTANT NOTICE REGARDING PET
BIRDS: Never keep pet birds in the kitchen or
in rooms where the fumes from the kitchen
could reach. Birds have a very sensitive res-
piratory system. Fumes released during an
oven self-cleaning cycle may be harmful or
fatal to birds. Fumes released due to over-
heated cooking oil, fat, margarine and over-
heated non-stick cookware may be equally
harmful.
4
Surface Cooking
OFF
HI
LO
MED
LITE
Settings Uses
HI Use HI to bring liquid to a boil, or reach pressure in a pressure
cooker. Always reduce setting to a lower heat when liquids begin
to boil or foods begin to cook.
An intermediate flame size is used to continue cooking. Food
will not cook any faster when a higher flame setting is used
than needed to maintain a gentle boil. Water boils at the same
temperature whether boiling gently or vigorously.
LO Use LO to simmer foods, keep foods warm and melt
chocolate or butter.
Some cooking may take place on the LO setting if the pan is
covered. It is possible to reduce the heat by rotating the knob
toward OFF. Be sure flame is stable.
Suggested Heat Settings
If flame should go out during a cooking
operation, turn the burner off. If a strong
gas odor is detected, open a window
and wait five minutes before relighting
the burner.
Be sure all surface controls are set to the
OFF position prior to supplying gas to
the cooktop.
NEVER touch cooktop until it has
cooled. Expect some parts of the
cooktop, especially around the burners,
to become warm or hot during cooking.
Use potholders to protect hands.
SURFACE CONTROL
KNOBS
Use to turn on the sur-
face burners. An infi-
nite choice of heat set-
tings is available from
LO to HI. At the HI
setting a detent or
notch may be felt.
SETTING THE CONTROLS
1. Place a pan on the burner grate. (To
preserve the grate finish, do not operate
the burners without a pan on the grate to
absorb the heat from the burner flame.)
2. Push in knob and turn immediately coun-
terclockwise to the LITE setting.
A clicking (spark) sound will be heard
and the burner will light. (All ignitors
will spark when any surface burner
knob is turned on. However, only
the selected burner will light.)
3. Turn knob to desired setting.
4. Do not leave cooktop unattended.
OFF
HI
LO
MED
LITE
The size and type of cookware will affect the heat setting.
OPERATING DURING A
POWER FAILURE
1. Hold a lighted match to the desired sur-
face burner head.
2. Push in and turn the control knob slowly to
the desired setting.
PILOTLESS IGNITION
Pilotless ignition eliminates the need for a
constant standing pilot light. Each surface
burner has a spark ignitor. Use care when
cleaning around the surface burner.
If the surface burner does not light, check if
ignitor is broken, soiled or wet.
CAUTION
CAUTION
Surface Controls
When lighting the surface burners, be
sure all of the controls are in the OFF
position. Strike the match first and
hold it in position before turning the
knob.
Do not leave the cooktop unattended
when cooking during a power failure.
OFF
HI
LO
MED
LITE
5
A properly adjusted burner with clean ports will light within a few seconds. If using natural
gas, the flame will be blue with a deeper blue inner cone.
If the burner flame is yellow or is noisy, the air/gas mixture may be incorrect. Contact a
service technician to adjust. (Adjustments are not covered by the warranty.)
With LP gas, some yellow tips on the flames are acceptable. This is normal and
adjustment is not necessary.
With some types of gas, you may hear a “popping” sound when the surface burner is
turned off. This is a normal operating sound of the burner.
To improve cooking efficiency and to prevent possible damage to the cooktop or pan,
the flame must be adjusted so it does not extend beyond the edge of the pan.
To prevent the cooktop from discoloring or
staining:
Clean cooktop after each use.
Wipe acidic or sugary spills as soon as
the cooktop has cooled as these spills
may discolor the surface.
SIMMER BURNER*
This burner is located in the center or left
rear position. The simmer burner offers a
lower BTU flame for delicate sauces or
melting chocolate.
* BTU ratings will vary when using LP gas.
BURNER GRATES
The grates must be properly positioned be-
fore cooking. Improper installation of the
grates may result in chipping of the cooktop.
To ensure proper positioning, align bumpers
on grate bottom with the indentations in the
cooktop.
Do not operate the burners without a pan
on the grate. The grate’s porcelain finish
may chip without a pan to absorb the
heat from the burner flame.
Although the burner grates are durable,
they will gradually lose their shine and/or
discolor, due to the high temperatures of the
gas flame.
COOKTOP AT A GLANCE
HIGH PERFORMANCE
BURNER*
There is one high speed burner on your
cooktop, located in the right front position.
This burner offers higher speed cooking that
can be used to quickly bring water to a boil
and for large-quantity cooking.
1. Left rear burner (5,000 BTUs).
2. Right rear burner (9,200 BTUs).
3. Left front burner (9,200 BTUs).
4. Right front burner (12,500 BTUs).
Model MGC5430
Surface Cooking, cont.
1. Left front burner (9,200 BTUs).
2. Left rear burner (10,500 BTUs).
3. Center burner (5,000 BTUs on HI,
650 BTUs on LO).
4. Right rear burner (9,200 BTUs).
5. Right front burner (12,500 BTUs).
Model MGC5536
NOTES:
1
2
3
4
1 2 3 4 5
SEALED BURNERS
The sealed burners are secured to the cooktop
and are not designed to be removed. Since
the burners are sealed into the cooktop,
boilovers or spills will not seep underneath
the cooktop.
However, the burners should be cleaned after
each use. The head portion of the burner has
a removable cap that is easily removed for
cleaning. (See page 6 for cleaning direc-
tions.)
Burner caps must be correctly placed on the
burner base for proper operation of the burner.
6
Be sure appliance is off and all
parts are cool before handling or
cleaning. This is to avoid damage
and possible burns.
To prevent staining or discoloration,
clean appliance after each use.
If a part is removed, be sure it is
correctly replaced.
Cleaning Procedures
BURNER CAPS AND SEALED
GAS BURNERS
Removable Burner Caps
Allow burner to cool. Remove burner cap
and wash in soapy water with a plastic
scouring pad. For stubborn soils, clean
with a soap-filled, nonabrasive pad or
Cooktop Cleaning Creme (Part
#20000001)** and a sponge.
Do not clean in dishwasher or self-clean-
ing oven.
Sealed Gas Burner
Clean frequently. Allow burner to cool.
Clean with soap and plastic scouring pad.
For stubborn soils, clean with a soap-filled,
nonabrasive pad.
Be careful not to get water into the center
of the burner.
Use care when cleaning the ignitor. If the
ignitor is wet or damaged the surface
burner will not light.
To ensure even cooking performance, keep
burner ports free of food soils/debris.
BURNER GRATES - PORCELAIN
ON CAST IRON
Wash grates with warm, soapy water and
a nonabrasive, plastic scrubbing pad. For
stubborn soils, clean with a soap-filled,
nonabrasive pad or Cooktop Cleaning
Creme (Part #20000001)** and a sponge.
If soil remains, reapply Cooktop Cleaning
Creme, cover with a damp paper towel
and soak for 30 minutes. Scrub again,
rinse and dry.
Do not clean in dishwasher or self-clean-
ing oven.
CONTROL KNOBS
Remove knobs in the OFF position by
pulling up.
Wash, rinse and dry. Do not use abrasive
cleaning agents as they may scratch the
finish.
Turn on each burner to be sure the knobs
have been correctly replaced.
COOKTOP - PORCELAIN
ENAMEL
Porcelain enamel is glass fused on metal and
may crack or chip with misuse. It is acid
resistant, not acid proof. All spillovers, espe-
cially acidic or sugary spillovers, should be
wiped up immediately with a dry cloth.
When cool, wash with soapy water, rinse
and dry.
Never wipe off a warm or hot surface with a
damp cloth. This may cause cracking or
chipping.
Never use oven cleaners, abrasive or caus-
tic cleaning agents on exterior finish of
range.
COOKTOP - STAINLESS STEEL
(SELECT MODELS)
DO NOT USE ANY CLEANING PROD-
UCT CONTAINING CHLORINE BLEACH.
ALWAYS WIPE WITH THE GRAIN WHEN
CLEANING.
Daily Cleaning/Light Soil –– Wipe with
one of the following - soapy water, white
vinegar/water solution, Formula 409 Glass
and Surface Cleaner* or a similar glass
cleaner - using a sponge or soft cloth. Rinse
and dry. To polish and help prevent finger-
prints, follow with Stainless Steel Magic
Spray (Part No. 20000008)**.
Moderate/Heavy Soil –– Wipe with one of
the following - Bon Ami*, Smart Cleanser*,
or Soft Scrub* - using a damp sponge or soft
CAUTION:
Care & Cleaning
* Brand names are registered trademarks of the respective manufacturers.
** To order call 1-800-688-8408.
Before You Call
For Service
cloth. Rinse and dry. Stubborn soils may be
removed with a damp Scotch-Brite* pad;
rub evenly with the grain. Rinse and dry. To
restore luster and remove streaks, follow
with Stainless Steel Magic Spray.
Discoloration –– Using a damp sponge or
soft cloth, wipe with Cameo Stainless Steel
Cleaner*. Rinse immediately and dry. To
remove streaks and restore luster, follow
with Stainless Steel Magic Spray.
SURFACE BURNER FAILS TO LIGHT.
Check to be sure plug is securely inserted
into receptacle.
Check or re-set circuit breaker. Check or
replace fuse.
Check power supply.
Check to be sure burner is correctly rated
for your kind of gas.
Check to be sure burner ports or ignition
ports are not clogged.
Check to be sure ignitor is dry and clicking.
Burner will not light if ignitor is damaged,
soiled or wet. If ignitor doesn’t click, turn
control knob OFF.
Check to be sure burner cap is correctly
seated on the burner base.
SURFACE BURNER FLAME LIFTS
OFF PORTS.
Check to be sure a pan is sitting on the
grate above.
Contact an authorized Maytag servicer.
THE FLAME IS UNEVEN.
Burner ports may be clogged.
Flame may need to be adjusted. Contact
an authorized Maytag servicer.
SURFACE BURNER FLAME IS
YELLOW IN COLOR.
Contact an authorized Maytag servicer.
Some yellow tips on the flame are accept-
able when using LP gas.
7
Wa r r a n ty
Warranty
Limited One Year Warranty - Parts
and Labor
For one (1) year from the original retail
purchase date, any part which fails in normal
home use will be repaired or replaced free of
charge.
Canadian Residents
The above warranties only cover an appliance
installed in Canada that has been certified or
listed by appropriate test agencies for
compliance to a National Standard of Canada
unless the appliance was brought into Canada
due to transfer of residence from the United
States to Canada.
The specific warranties expressed above are
the ONLY warranties provided by the
manufacturer. These warranties give you
specific legal rights, and you may also have
other rights which vary from state to state.
What is Not Covered By These Warranties
1. Conditions and damages resulting from any of the following:
a. Improper installation, delivery, or maintenance.
b. Any repair, modification, alteration, or adjustment not authorized by the
manufacturer or an authorized servicer.
c. Misuse, abuse, accidents, or unreasonable use, or acts of God.
d. Incorrect electric current, voltage, electrical and/ or gas supply.
e. Improper setting of any control.
2. Warranties are void if the original serial numbers have been removed, altered, or
cannot be readily determined.
3. Light bulbs, water filters and air filters.
4. Products purchased for commercial or industrial use.
5. The cost of service or service call to:
a. Correct installation errors. For products requiring ventilation, rigid metal
ducting must be used.
b. Instruct the user on the proper use of the product.
c. Transport the appliance to and from the servicer.
6. Any food loss due to refrigerator or freezer product failures.
7. Expenses for travel and transportation for product service in remote locations.
8. Outside of the United States and Canada this warranty does not apply. Contact your
dealer to determine if another warranty applies.
9. Consequential or incidental damages sustained by any person as a result of any
breach of these warranties. Some states do not allow the exclusion or limitation of
consequential or incidental damages, so the above exclusion may not apply.
If You Need Service
First see the Troubleshooting section in your Use and Care Guide or call the dealer from
whom your appliance was purchased or call Maytag Services, LLC, Customer Assistance
at 1-800-688-9900 USA and 1-800-688-2002 Canada to locate an authorized servicer.
Be sure to retain proof of purchase to verify warranty status. Refer to WARRANTY for
further information on owner’s responsibilities for warranty service.
If the dealer or service company cannot resolve the problem, write to Maytag Services,
LLC, Attn: CAIR
®
Center, P.O. Box 2370, Cleveland, TN 37320-2370, or call
1-800-688-9900 USA and 1-800-688-2002 Canada. U.S. customers using TTY for
deaf, hearing impaired or speech impaired, call 1-800-688-2080.
User’s guides, service manuals and parts information are available from Maytag
Services, LLC, Customer Assistance.
CUSTOMER'S SOLE AND EXCLUSIVE
REMEDY UNDER THIS LIMITED WARRANTY
SHALL BE PRODUCT REPAIR AS PROVIDED
HEREIN. IMPLIED WARRANTIES, INCLUDING
WARRANTIES OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE, ARE
LIMITED TO ONE YEAR OR THE SHORTEST
PERIOD ALLOWED BY LAW. MAYTAG
CORPORATION SHALL NOT BE LIABLE FOR
INCIDENTAL OR CONSEQUENTIAL
DAMAGES. SOME STATES AND PROVINCES
DO NOT ALLOW THE EXCLUSION OR
LIMITATION OF INCIDENTAL OR
CONSEQUENTIAL DAMAGES, OR
LIMITATIONS ON THE DURATION OF IMPLIED
WARRANTIES OF MERCHANTABILITY OR
FITNESS, SO THESE EXCLUSIONS OR
LIMITATIONS MAY NOT APPLY TO YOU. THIS
WARRANTY GIVES YOU SPECIFIC LEGAL
RIGHTS AND YOU MAY ALSO HAVE OTHER
RIGHTS, WHICH VARY STATE TO STATE OR
PROVINCE TO PROVINCE.
Notes: When writing or calling about a service problem, please include:
a. Your name, address and telephone number;
b. Model number and serial number;
c. Name and address of your dealer or servicer;
d. A clear description of the problem you are having;
e. Proof of purchase (sales receipt).
c::;?;ORST
.........
~--J.P
Fisher&Payke/
II/movst/ve
Produds
for
Bulldlflf!i
Ii
HomeOwners·
DIMENSIONS:
H.
16-1/8" xW. 23-5/8" x
0.22-7/8"
Dish Drawer
DD24SCB6
The only dishwasher
in
drawers
Single units offer ultimate design and flexibility
Each Dish Drawer works independently
Precision Wash Temperatures
Nine Wash Programs
Rinse Agent Dispenser
Incredibly reliable, no belts, pulleys or clutches
163
0
Fahrenheit Temperatures
Minimized water, energy and detergent consumption
Only 1.9 gallons
of
water per full wash load
Delay Start up to 12 hours
Concealed wash cycle controls
Unique Motor Technology, Extremely Quiet
Child Lock
Self diagnostic for serviCing
Fuzzy logic incorporated technology for the ultimate
in
service-ability
Color:
Stainless Steel
Preliminary information-drawing &specs subject to change
US CA NZ AU GB IE
User guide
DishDrawer®
DD24 and DD60 models
1
Contents
Safety and warnings
2
Electrical connection (GB IE only)
5
Operating instructions
Controls
(models with no LCD)
6
Controls (models with LCD)
8
Quick start
10
Caring for your dinnerware
11
Racking and accessories
12
Loading suggestions
16
Water hardness and dishwashing
18
Wash programmes and detergent quantities
19
Detergent dispenser
20
Using tablets
21
Rinse aid dispenser
22
Water softener
23
Option adjustments
26
User maintenance instructions
29
Troubleshooting
32
Fault codes
34
Warranty and service
37
Wash programme data
38
Standards test - USA and Canada
40
Standards test - New Zealand and Australia
41
Standards test - Great Britain and Ireland
42
Important!
SAVE THESE INSTRUCTIONS
The models shown in this user guide may not be available in all markets and are
subject to change at any time. For current details about model and specification
availability in your country, please visit our local website listed on the back cover
or contact your local Fisher & Paykel dealer.
2
Your DishDrawer® has been carefully designed to operate safely during normal dishwashing
procedures. Please keep the following instructions in mind when you are using your
DishDrawer®.
Safety and warnings
Important safety instructions
WARNING! - When using your dishwasher, follow basic precautions, including the following:
Read all instructions before using the DishDrawer®.
The information in this manual must be followed to minimise the risk of fire or explosion or to
prevent property damage, personal injury or loss of life.
Use the DishDrawer® only for its intended function as described in this user guide.
This appliance is intended to be used in household and similar applications such as:
– staff kitchen areas in shops, offices and other working environments;
– farm houses;
– by clients in hotels, motels and other residential type environments;
bed and breakfast type environments.
Use only detergents or rinse aid recommended for use in a domestic dishwasher and keep them
out of reach of children. Check that the detergent dispenser is empty after the completion of each
wash programme.
When loading items to be washed, locate sharp items so that they are not likely to damage the lid
seal and load sharp knives with the handle up to reduce the risk of cut-type injuries.
Do not touch the heater plate during or immediately after use.
Do not operate your DishDrawer® unless all enclosure panels are properly in place.
Do not tamper with the controls.
Do not abuse, sit on, stand in or on the drawer or dish rack of the DishDrawer®.
The DishDrawer should not be left in the open position since this could present a tripping hazard.
The adjustable racks are designed to support cups, glasses and kitchen utensils. When the
adjustable racks are in the DishDrawer® do not lean on or use them to support your body weight.
To reduce the risk of injury, do not allow children to play in or on the DishDrawer®.
Under certain conditions, hydrogen gas may be produced in a hot water heater system that has
not been used for two weeks or more. HYDROGEN GAS IS EXPLOSIVE. If the hot water system has
not been used for such a period, before using the dishwasher, turn on all hot water taps and let
the water flow from each for several minutes. This will release any accumulated hydrogen gas. As
the gas is flammable, do not smoke or use an open flame during this time.
Remove the door to the washing compartment when removing an old dishwasher from service
or discarding it.
Some dishwasher detergents are strongly alkaline. They can be extremely dangerous if
swallowed. Avoid contact with the skin and eyes and keep children away from the dishwasher
when the door is open. Check that the detergent receptacle is empty after completion of the wash
cycle.
3
Safety and warnings
Important safety instructions
Installation
This DishDrawer® must be installed and located in accordance with the Installation instructions
before it is used. If you did not receive Installation instruction sheets with your DishDrawer®, you
can order them by calling your Authorised Repairer or download them from our local Fisher &
Paykel website, listed on the back cover.
Installation and service must be performed by a qualified technician.
If the power supply cord is damaged, it must be replaced by a dealer or Authorised Repairer or a
similar qualified trades person in order to avoid a hazard.
Ensure the DishDrawer® is secured to adjacent cabinetry using the brackets provided. Failure to
do so may result in an unstable product, which may cause damage or injury.
Do not operate this appliance if it is damaged, malfunctioning, partially disassembled or has
missing or broken parts, including a damaged power supply cord or plug.
Do not store or use petrol, or other flammable vapours and liquids in the vicinity of the
DishDrawer®.
Connect to a properly rated, protected and sized power supply circuit to avoid electrical overload.
Make sure that the power supply cord is located so that it will not be stepped on, tripped over or
otherwise subject to damage or stress.
Do not install or store the DishDrawer® where it will be exposed to temperatures below freezing
or exposed to weather.
Do not use an extension cord or a portable electrical outlet device (e.g. multi-socket outlet box)
to connect the DishDrawer® to the power supply.
This appliance must be grounded. In the event of a malfunction or breakdown, grounding will
reduce the risk of electric shock by providing a path of least resistance for electric current. This
appliance is equipped with a cord having an equipment-grounding conductor and a grounding
plug. The plug must be plugged into an appropriate outlet that is installed and grounded
in accordance with all local codes and ordinances. WARNING - Improper connection of the
equipment-grounding conductor can result in a risk of electric shock. Check with a qualified
electrician or service representative if you are in doubt as to whether the appliance is properly
grounded. Do not modify the plug provided with the appliance; if it will not fit the outlet, have a
proper outlet installed by a qualified technician.
If the DishDrawer® is installed as a permanently connected appliance:
GROUNDING INSTRUCTIONS - This appliance must be connected to a grounded metal, permanent
wiring system, or an equipment-grounding conductor must be run with the circuit conductors
and connected to the equipment-grounding terminal or lead on the appliance.
4
Safety and warnings
Important safety instructions
Maintenance
Disconnect the appliance from the power supply before any cleaning or maintenance.
Do not repair or replace any part of the appliance or attempt any servicing unless specifically
recommended in this user guide. We recommend that you call an Authorised Repairer.
Keep the floor around your appliance clean and dry to reduce the possibility of slipping.
Keep the area around/underneath your appliance free from the accumulation of combustible
materials, such as lint, paper, rags and chemicals.
Important!
Under no circumstances should you open the drawer whilst the DishDrawer® is in operation.
Operational
Always press the
button to pause and wait until you hear the three additional beeps before
opening the drawer.
The DishDrawer® must be used with the motor assembly, filter plate, drain filter and spray arm in
place.
When disconnecting the appliance pull the plug rather than the power supply cord or junction of
cord to avoid damage.
Take care when loading the DishDrawer® not to load dishware items so they prevent the lid from
properly sealing with the drawer. Items should be placed so they do not protrude above and/or
forced into the drawer, otherwise a service call may result.
Household appliances are not intended to be played with by children. Children or persons with a
disability which limits their ability to use the appliance, should have a responsible person instruct
them in its use. The instructor should be satisfied that they can then use the appliance without
danger to themselves or their surroundings.
Close supervision is necessary if this appliance is used by or near children. Do not allow children
to play inside, on or with this appliance or any discarded appliance.
If a dishwasher cleaner is used, we would strongly recommend a wash programme with detergent
should be run immediately afterward, to prevent any damage to the DishDrawer®.
The DishDrawer® is designed for washing normal household utensils. Items that are
contaminated by petrol, paint, steel or iron debris, corrosive, acidic or alkaline chemicals are not
to be washed in the DishDrawer®.
If the DishDrawer® is not being used for long periods of time, turn the electricity and water supply
to the DishDrawer® off.
Do not operate your appliance by means of an external timer or separate remote-control system.
5
For Great Britain only
Important!
This appliance must be earthed.
Fuse replacement
The mains lead of this appliance is fitted with a
BS 1363A 13 A fused plug. To change a fuse in
this type of plug, use an ASTA approved fuse to
BS 1362 type and proceed as follows:
1
Remove the fuse cover and fuse.
2
Fit the replacement 13A fuse into the fuse cover.
3
Refit both into plug.
Important!
The fuse cover must be refitted when changing a fuse and if the fuse cover is lost, the plug
must not be used until a correct replacement is fitted.
Correct replacements are identified by the colour insert or the colour embossed in words on
the base of the plug.
Replacement fuse covers are available from your local electrical store.
For the Republic of Ireland
The information given in respect to Great Britain will frequently apply, but a third type of plug
and socket is also used: the 2-pin, side earth type.
Socket outlet / plug (valid for both countries)
If the fitted plug is not suitable for your socket outlet, please contact an Authorised Service
Agent. Please do not attempt to change the plug yourself. This procedure must be carried out
by a qualified service technician in compliance with the manufacturer’s instructions and current
standard safety regulations.
Fuse cover
Fuse
Electrical connection (GB IE only)
6
If you have a double DishDrawer®, each drawer has its own controls and can run independently
of the other.
Power button /
The / button turns the DishDrawer® on or off. Opening
the drawer will automatically turn the DishDrawer® on for
30 seconds. To end a wash programme in mid cycle, press
the
/ button. Any water in the DishDrawer® will be
pumped out.
Start/Pause button
The button starts a wash programme. Press the
button to pause or restart the DishDrawer® during a wash
programme. When paused, wait for three beeps before
opening the drawer. Forcing the drawer open while in mid
cycle may cause damage or injury.
Delay start
The button also sets the Delay start feature which can delay the start of a wash programme
from 1 to 12 hours.
To activate Delay start
1
Press and hold the button until the light above the button turns orange or purple,
depending on your model.
2
Continue holding the button down until the desired delay time has been reached. The
DishDrawer® will emit audible beeps as you hold the
button down, each beep indicates
another hour delay.
3
The DishDrawer® will start once the delay time has elapsed and the drawer is closed.
To cancel Delay start
Press the / button.
Lock button / (optional)
The / button activates/deactivates the Keylock or the Childlock functions.
Operating instructions - Controls (models with no LCD)
7
Keylock
The Keylock feature disables all the buttons on the DishDrawer®.
To activate, press and hold the
/ button until you hear one beep (3 seconds). The light
above the
/ button is lit when Keylock is activated.
To cancel the Keylock feature, press and hold the
/ button until the light above the /
button disappears.
Childlock
The Childlock feature locks the drawer and disables all the buttons.
To activate, press and hold the
/ button until you hear two beeps (5 seconds). The light
above the
/ button is lit when Childlock is activated.
To cancel the Childlock feature, press and hold the
/ button until the light above the
/ button disappears.
/ button (optional)
Press the ECO button if you would like the wash programme to use less energy. The red ECO
light will indicate the feature is on. If your dishes are heavily soiled or you require enhanced dry
performance, we do not recommend ECO programmes.
Power failure
If the DishDrawer® is operating and a power failure occurs, it will stop. The DishDrawer® may be
unable to be opened during this time. When the power supply is resumed, the DishDrawer® will
restart in the same part of the wash programme.
Operating instructions - Controls (models with no LCD)
Wash programme selector
Press the button to select a wash
programme. The DishDrawer® will remember
the last programme used.
Wash programme selector (GB IE only)
Press the button to select a wash
programme. The DishDrawer® will remember
the last programme used.
Heavy Normal Fast Delicate Rinse
8
If you have a double DishDrawer®, each drawer has its own control panel and can run
independently of the other.
Power button
The button turns the DishDrawer® on or off. Opening the drawer will automatically turn the
DishDrawer® on for 30 seconds. To end a wash programme in mid cycle, press the
button.
Any water in the DishDrawer® will be pumped out.
Start/Pause button
The button starts a wash programme. Press the button to pause or restart the
DishDrawer® during a wash programme. When paused, wait for three beeps before opening the
drawer. Forcing the drawer open while in mid cycle may cause damage or injury.
Delay start
The button also sets the Delay start feature which can delay the start of a wash programme
from 1 to 12 hours.
To activate Delay start
1
Press and hold the button until the delay symbol appears on the electronic display.
2
Continue holding the button down until the desired delay time has been reached.
3
The DishDrawer® will start once the delay time has elapsed and the drawer is closed.
To cancel Delay start
Press the button.
Lock button (optional)
The button activates/deactivates the Keylock or the Childlock functions.
Power
button
Time
remaining
Fault symbols - see ‘Fault
codes’ if they appear
Start/Pause
button
Wash programme
progress symbol
Lock button
Keylock or Childlock is
activated
Delay start symbol
Operating instructions - Controls (models with LCD)
9
Keylock
The Keylock feature disables all the buttons on the control panel.
To activate, press and hold the
button until you hear one beep (3 seconds). The symbol
appears in the electronic display when the Keylock feature is activated.
Childlock
The Childlock feature locks the drawer and disables all the buttons on the control panel.
To activate, press and hold the
button until you hear two beeps (5 seconds). The symbol
appears in the electronic display when the Childlock feature is activated.
To cancel the Childlock feature, press and hold the
button until you hear one beep and the
symbol disappears from the electronic display.
/ button (optional)
Press the ECO button if you would like the wash programme to use less energy. The red ECO
light will indicate the feature is on. If your dishes are heavily soiled or you require enhanced dry
performance, we do not recommend ECO programmes.
Wash programme progress symbols
As the wash programme advances through the cycle, the following symbols will appear in
the electronic display to indicate the progression. When a wash programme has started, the
electronic display also will count down the time remaining in one minute increments.
Power failure
If the DishDrawer® is operating and a power failure occurs, it will stop. The DishDrawer® may be
unable to be opened during this time. When the power supply is resumed, the DishDrawer® will
restart in the same part of the wash programme.
Dirty Pre Wash Main Wash Post Rinse Drying Clean
Operating instructions - Controls (models with LCD)
Wash programme selector
Press the button to select a wash
programme. The DishDrawer® will remember
the last programme used.
Wash programme selector (GB IE only)
Press the button to select a wash
programme. The DishDrawer® will remember
the last programme used.
Heavy Normal Fast Delicate
Rinse
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67

Maytag MEC7430W - 30 in. Electric Cooktop User manual

Category
Cookers
Type
User manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI