Page is loading ...
Step
Step Getting Connected
Select one of the following three types of connections:
Connecting DVD Recorder-VCR to the TV using the RF Cable
Connecting DVD Recorder-VCR to the TV using the SCART Cable
Connecting DVD Recorder-VCR to a Satellite Receiver or Other Equipment
Connecting DVD Recorder-VCR to the TV using the RF Cable
The Recorder will only record on
DVD-R, DVD-RW and DVD-RAM discs.
Quick Setup Guide
DVD Recorder - VCR
DVD Recorder - VCR
Step Getting Connected
Step Basic Operation
1
MEDIA BRAND SPEED
TDK 4x
That’s 4x
DVD-R Maxell 4x
Panasonic 4x
Ritek 4x
Verbatim 2x
JVC 2x
DVD-RW
Radius 2x
TDK 2x
MCC Green Non-Ctrg. 4.7G 2x
MEI White for Video Non-Ctrg. 4.7G 2x
DVD-RAM Fuji Gold Non-Ctrg. 4.7G 2x
Maxell Ctrg. 4.7G 2x
TDK White Non-Ctrg. 4.7G 2x
❊
We recommend using one of the discs in the table as they
have been confirmed to be compatible with this unit. Other
discs may not perform correctly.
❊
Note: LD, CD-G, CD-I, CD-ROM, DVD-ROM, VCD, DVD+R and
DVD+RW discs should not be used in this product.
Remove the aerial or network input cable from the tele-
vision.
Connect this cable to the 75Ω coaxial socket marked
on the rear of your DVD Recorder-VCR.
Plug the RF cable supplied into the socket on your
DVD Recorder-VCR.
Plug the other end of the RF cable into the connector
previously used for the aerial on the television.
TV
ANT
TV
DIGITAL AUDIO OUT
OPTICAL
COAXIAL
RR
L
VIDEO
L
RF cable
Aerial
AUDIO OUT
C Samsung Electronics Printed in Korea
Connecting DVD Recorder-VCR to the TV using the SCART Cable
Connecting DVD Recorder-VCR to a Satellite Receiver or Other Equipment
You can connect your DVD Recorder-VCR to a Satellite receiver or
other DVD Recorder-VCR using the SCART cable if the appropriate
outputs are available on the equipment chosen. The following illustra-
tions give a few examples of the connection possibilities.
AV1(EURO AV): By means of 21-pin Scart
Cable
Plug the SCART Cable with satellite receiver or other equipment
into the AV1 (EURO AV) socket on the rear of the DVD Recorder-
VCR. After making this connection, select the source by pressing
the INPUT SEL. button for the AV1 input sources.
By means of RF Cable
After making this connection, you must preset the station
received through the satellite tuner. RF output channel of the
satellite receiver should be adjusted away from channel 60,
which is used by the DVD Recorder-VCR, e.g. re-adjust to
channel 65.
AV2 IN: By means of 21-pin Scart Cable
Plug the SCART Cable with satellite receiver or other equipment
into the AV2 (DEC./EXT.) socket on the rear of the DVD
Recorder-VCR. After making this connection, select the source
by pressing the INPUT SEL. button for the AV2 input sources.
By means of RF Cable
After making this connection, you must preset the
station received through the satellite tuner. RF output channel
of the satellite receiver should be adjusted away from channel
60, which is used by the DVD Recorder-VCR, e.g. re-adjust to
channel 65.
2
ANT
TV
RF cable
Aerial Connector
Satellite Receiver or other
Equipment
DIGITAL AUDIO OUT
OPTICAL
COAXIAL
RR
L
VIDEO
L
1
2
AUDIO OUT
ANT
TV
DIGITAL AUDIO OUT
OPTICAL
COAXIAL
RR
L
VIDEO
L
SCART Cable
RF cable
Aerial
1
2
AUDIO OUT
ANT
TV
Satellite Receiver or other
Equipment
RF cable
SCART
Cable
Aerial Connector
DIGITAL AUDIO OUT
OPTICAL
COAXIAL
RR
L
VIDEO
L
1
2
AUDIO OUT
You can connect your DVD Recorder-VCR to the television
using the SCART cable if the appropriate input is available on
the television. You thus:
● Obtain better quality sound and pictures
● Simplify the setting up procedure of your DVD Recorder-
VCR
● Regardless of the type of connection chosen, you must
always connect the RF cable supplied. Otherwise, no
picture will be visible on the screen when the DVD
Recorder-VCR is switched off.
● Make sure that both the television and the DVD Recorder-
VCR are switched off before connecting the cables.
Connect the RF cable as indicated in the previous
previous section.
Connect one end of the SCART cable to the AV1
(EURO AV) socket on the rear of the DVD Recorder-VCR.
Plug the other end into the appropriate connector on the
television.
Wait! Make sure you complete Step before proceeding
with Step .
The following instructions will give you a quick overview about how
to use the DVD Recorder-VCR.
Formatting a Disc
Recording the current TV program you are watching
Making a Timer Programming
Finalising a Disc
Recording Formats
When you insert an unused disc, the following message appears.
Since available functions differ depending on the disc type, select a
disc that best fits your preferences.
DVD-RAM : Use after
formatting the disc.
DVD-RW : When
unused DVD-RW disc is
first inserted, the
message “Do you want to
initalize this disc” will be
displayed. If you select
Yes, the disc will be for-
matted in VR mode. If you
want to change the mode,
refer to Formatting a Disc on page 99.
DVD-R : Formatting is unnecessary and only Video
Mode Recording is supported.
Press the
MENU
button with the disc stopped.
Press the
…/†
buttons
to select Disc
Manager, and then
press the
OK
or
√
button.
Press the
…/†
buttons
to select Disc Format,
and then press the
OK
or
√
button.
DVD-RAM(VR)
●
You will be prompted with
the confirmation message
'Do you want to format
disc?'.
If you select Yes you will be
prompted with the confir-
mation message 'All data
will be deleted. Do you
want to continue?'.
DVD-RW
●
You will be prompted with
the confirmation message
’Choose the recording
format for DVD-RW’.
Press the
➛
/
❿
buttons
to select Yes, and then press the OK button. The disc is
formatted.
Recording the current Program you are
watching
Press the
OPEN/CLOSE
button, and place a recordable disc
on the disc tray.
Press the
OPEN/CLOSE
again to close the disc tray.
Press the
PROG/TRK ( / )
buttons to select the station
you want to record.
●
The AV1, AV2 or AUX using the INPUT SEL. button for a satellite
tuner or exteral Video source.
Press the
REC SPEED
button on remote con-
trol, to select the
recording speed
(quality).
●
XP(High, approx. 1 hour)
SP(Standard, approx. 2
hours) LP(Low, approx. 4
hours) EP(Extended Play,
approx 6 hours)
DVD
➜SP➜LP➜EP➜XP
Mode Recording Times
XP (high quality mode) Approx. 1 hour
SP (standard quality mode) Approx. 2 hours
LP (long recording mode) Approx. 4 hours
EP (extended mode) Approx. 6 hours
Step
Step Basic Operation
RETURNOKMOVE EXIT
Disc Manager
DVD-RAM(VR)
Disc Name :
√√
Disc Protection : Not protected
√√
Disc Format
√√
Delete All Title Lists
√√
Cartridge Protect Inf
√√
All data will be deleted.
Do you want to continue?
Yes No
Unformatted Disc
Do you want to format this disc?
Yes No
Uninitialized Disc
Do you want to initialize this disc?
Yes No
RETURNOKMOVE EXIT
Disc Manager
DVD-RW(VR)
Disc Name :
√√
Disc Protection : Not protected
√√
Disc Format
√√
Delete All Title Lists
√√
√√ √√
Choose the recording format for DVD-RW.
DVD-VR DVD-V
DVD
VOL
F.ADV MARKER
TITLE LIST
DISC MENU TITLE MENU
OK
RETURN
INFO. TV/VCR SUBTITLE REC SPEED
REC DVD VCR REC PAUSE
CLEAR
MENU ANYKEY
PLAY LIST
SKIP
PROG/TRK OPEN/CLOSE
VCR TV
INPUT SEL.
TIMER
REC
-
-
-
-
3
RETURNOKMOVE EXIT
Disc Manager
DVD-RAM(VR)
Disc Name :
√√
Disc Protection : Not protected
√√
Disc Format
√√
Delete All Title Lists
√√
Cartridge Protection Info
√√
-R
SP
-
VCR
➜SP➜LP
Mode Recording Time
SP (standard quality mode)
(E-180) Approx. 3 hours
LP (Long recording mode) Approx. 9 hours
Press the
REC
button.
Press the
STOP (■)
button
●
The message “Updating the information of disc. Please wait
for a moment”.
Pausing / Resuming
●
Press the REC PAUSE button to pause a recording in
progress.
●
Press the REC PAUSE button to again during pause to
resume recording.
●
You can switch channels by pressing the PROG/TRK ( / )
buttons while recording is pauses.
Using the Timer Programming Feature
Press the MENU button.
Press the
…/†
buttons
to select Programme
and then press the
OK or
√
button.
Press the
…/†
buttons to select Standard Timer, and then
press the OK button.
Press the
…/†
buttons to select scheduled Record list, and
then press the
√
or OK button.
Set timer recording option.
●
The Timer Programming screen is displayed. Fill the input
items using the arrow buttons.
➛❿
: Moves to the previous/next item,
❷
: Sets a value.
●
TO : Select the media to record DVD or VCR.
●
PR : The video input source (AV1 or AV2), or the broadcasting
channel you want to make a timer recording from.
●
Day : Set the recording day.
●
Start/End Time : Start and end time of the timer programming.
●
Recording Speed : Recording speed
●
VPS : Video Programme System.
●
PDC : Programme Delivery Control.
Press the OK button.
Turn the power off to finish the timer recording.
Timer programming will not work when the power is on.
Finalising a Disc
After you record titles onto a DVD-RW/DVD-R disc with your
DVD Recorder-VCR, it needs to be finalised be played back on
external devices.
Press the
MENU
button with the disc stopped.
Press the
…/†
buttons to
select Disc Manager,
and then press the
OK
or
√
button.
Press the
…/†
buttons to
select Disc Finalise, and
then press the
OK
or
√
button. You will be
prompted with the mes-
sage 'Do you want to
finalise disc?'. If you
select Yes, you will be
prompted again with
the message 'Disc will
be finalised. Do you
want to continue?'.
Press the œ/√ buttons to select Yes, and then press the OK
button.
The disc is finalised.
Once a disc is finalised, you cannot delete entries from the
record list.
■
After being finalised, the DVD-R operates in the same
manner as a regular DVD-Video.
■
Depending on the kind of disc, the displayed screen may
be slightly different.
■
Finalising will be taken few minutes. If you turn the unit
on/off or open the tray during finalising, you will not be
able to use the disc anymore.
RETURNOKMOVE EXIT
Scheduled Record List
DVD-RAM(VR)
01
---
--
/
--
--:---- --:---- -- --
√√
No. Source Date Start End Type Mode Edit
No. 02
TO DVD PR 02
Day THE 03
Start 09 : 22 End 10 : 30
Speed SP VPS/PDC Off
RETURNOKMOVE EXIT
Scheduled Record List
DVD-RAM(VR)
01
DVD
02 Tue 03 09:22 10:30 SP Off
√√
02
-- ---
--
/
--
--:----
--:---- -- --
√√
No. To PR Day Start End Speed V/P Edit
DVD
VOL
F.ADV MARKER
TITLE LIST
DISC MENU TITLE MENU
OK
RETURN
INFO. TV/VCR SUBTITLE REC SPEED
REC DVD VCR REC PAUSE
TIME SLIP
PIP
CLEAR
MENU ANYKEY
PLAY LIST
SKIP
PROG/TRK OPEN/CLOSE
VCR TV
INPUT SEL.
TIMER
REC
SELECT
COPY
-
-
-
-
-
-
RETURNOKMOVE EXIT
Disc Manager
DVD-RW(VR)
Disc Name :
√√
Disc Protection : Not protected
√√
Disc Format : DVD-VR
√√
Disc Finalise
√√
Delete All Title Lists
√√
4
-
RETURNOKMOVE EXIT
Programme
DVD-RAM(VR)
Video Plus+
√√
Standard Timer
√√
Video Plus+ Extended : Off
√√
RETURNOKMOVE EXIT
Disc Manager
DVD-RW(VR)
Disc Name :
√√
Disc Protection : Not protected
√√
Disc Format
√√
Delete All Title Lists
√√
Cartridge Protect Inf
√√
Disc will be finalised.
Do you want to continue?
Yes No
AK68-00510B
/