Samsung UN55JU7500H Quick start guide

Brand: Samsung

Model: UN55JU7500H

Category: LED TVs

Type: Quick start guide

This manual is also suitable for

Thank you for purchasing this Samsung product.

To receive more complete service, please register

your product at

www.samsung.com/register

Model _____________Serial No. _____________

user manual

[JU7500-ZS]BN68-07050K-02L02.indb 1 2015-03-26 �� 8:34:59

English - 2

Warning! Important Safety Instructions

Please read the Safety Instructions before using your TV.

CAUTION

RISK OF ELECTRIC SHOCK DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK). THERE ARE

NO USER SERVICEABLE PARTS INSIDE. REFER ALL

SERVICING TO QUALIFIED PERSONNEL.

This symbol indicates that high voltage is

present inside. It is dangerous to make any

kind of contact with any internal part of this

product.

This symbol indicates that this product has

included important literature concerning

operation and maintenance.

The slots and openings in the cabinet and in the back or bottom are provided for necessary ventilation. To ensure reliable operation of

this apparatus and to protect it from overheating, these slots and openings must never be blocked or covered.

N Do not place this apparatus in a confined space, such as a bookcase or built-in cabinet, unless proper ventilation is provided.

N Do not place this apparatus near or over a radiator or heat register, or where it is exposed to direct sunlight.

N Do not place vessels (vases etc.) containing water on this apparatus, as this can result in a fire or electric shock.

Do not expose this apparatus to rain or place it near water (near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet basement,

or near a swimming pool etc.). If this apparatus accidentally gets wet, unplug it and contact an authorised dealer immediately.

This apparatus uses batteries. In your community, there might be environmental regulations that require you to dispose of these

batteries properly. Please contact your local authorities for disposal or recycling information.

Do not overload wall outlets, extension cords or adaptors beyond their capacity, since this can result in fire or electric shock.

Power-supply cords should be placed so that they are not likely to be walked on or pinched by items placed upon or against them. Pay

particular attention to cords at the plug end, at wall outlets, and at the point where they exit from the appliance.

To protect this apparatus from a lightning storm, or when left unattended and unused for long periods of time, unplug it from the wall

outlet and disconnect the antenna or cable system. This will prevent damage to the set due to lightning and power line surges.

Before connecting the AC power cord to the DC adaptor outlet, make sure that the voltage designation of the DC adaptor corresponds

to the local electrical supply.

Never insert anything metallic into the open parts of this apparatus. This may cause a danger of electric shock.

To avoid electric shock, never touch the inside of this apparatus. Only a qualified technician should open this apparatus.

Be sure to plug in the power cord until it is firmly seated. When unplugging the power cord from a wall outlet, always pull on the power

cord's plug. Never unplug it by pulling on the power cord. Do not touch the power cord with wet hands.

If this apparatus does not operate normally - in particular, if there are any unusual sounds or smells coming from it - unplug it

immediately and contact an authorised dealer or service centre.

Be sure to pull the power plug out of the outlet if the TV is to remain unused or if you are to leave the house for an extended period of

time (especially when children, elderly or disabled people will be left alone in the house).

N Accumulated dust can cause an electric shock, an electric leakage, or a fire by causing the power cord to generate sparks and

heat or by causing the insulation to deteriorate.

Be sure to contact an authorised service centre for information if you intend to install your TV in a location with heavy dust, high or low

temperatures, high humidity, chemical substances, or where it will operate 24 hours a day such as in an aerial port, a train station, etc.

Failure to do so may lead to serious damage to your TV.

Use only a properly grounded plug and wall outlet.

N An improper ground may cause electric shock or equipment damage. (Class l Equipment only.)

To turn off this apparatus completely, disconnect it from the wall outlet. Be sure to have the wall outlet and power plug readily

accessible.

Do not allow children to hang onto the product.

Store the accessories (battery, etc.) in a location safely out of the reach of children.

Do not install the product in an unstable location such as a shaky shelf or a slanted floor or in a location exposed to vibration.

Do not drop or strike the product. If the product is damaged, disconnect the power cord and contact a service centre.

To clean this apparatus, unplug the power cord from the wall outlet and wipe the product with a soft, dry cloth. Do not use any

chemicals such as wax, benzene, alcohol, thinners, insecticide, aerial fresheners, lubricants, or detergents. These chemicals can

damage the appearance of the TV or erase the printing on the product.

Do not expose this apparatus to dripping or splashing.

Do not dispose of batteries in a fire.

Do not short-circuit, disassemble, or overheat the batteries.

There is danger of an explosion if you replace the batteries used in the remote with the wrong type of battery. Replace only with the

same or equivalent type.

WARNING - TO PREVENT THE SPREAD OF FIRE, KEEP CANDLES OR OTHER ITEMS WITH OPEN FLAMES AWAY

FROM THIS PRODUCT AT ALL TIMES.

* Figures and illustrations in this User Manual are provided for reference only and may differ from the actual product

appearance. Product design and specifications may change without notice.

[JU7500-ZS]BN68-07050K-02L02.indb 2 2015-03-26 �� 8:34:59

English - 3

What's in the Box?

Samsung Smart Control & Batteries (AA x 2)

User Manual

Power Cord

Warranty Card / Regulatory Guide

(Not available in some locations)

AV Adapter Component Adapter Wall Mount Adapter

One Connect Mini One Connect Mini cable

N Please make sure the following items are included with your TV. If any items are missing, contact your

dealer.

N The items’ colors and shapes may vary depending on the models.

N Cables not included can be purchased separately.

N Check for any accessories hidden behind or in the packing materials when opening the box.

N To use the 3D function, you must purchase the 3D glasses.

Warning: Screens can be damaged from direct pressure when

handled incorrectly. We recommend lifting the TV at the edges, as

shown.

Don't Touch

This Screen!

[JU7500-ZS]BN68-07050K-02L02.indb 3 2015-03-26 �� 8:34:59

English - 4

Initial Setup

When you turn on your TV for the first time, it immediately starts the Initial Setup. During Initial Setup, your TV

pairs with the Samsung Smart Control, connects to your home network, implements Smart Hub agreements,

links to the source of your live TV signal, and sets up control of your cable or satellite box.

To learn more about operating your TV, launch the TV’s built in e-Manual after you have completed the Initial

Setup.

Using the TV Controller

You can use the TV Controller on the back of the TV instead of the remote control to control most of the

functions of your TV.

Control Menu

Remote control sensor

Control Stick

The

Control Stick

located on the lower left

corner of the back of

the TV.

: Opens

Smart Hub

: Opens the menu.

: Selects a source.

: Turns off the TV.

[JU7500-ZS]BN68-07050K-02L02.indb 4 2015-03-26 �� 8:35:00

English - 5

The Samsung Smart Control

: Press this button to mute the sound temporarily.

–

: Press and hold this button to bring up the

Accessibility Shortcuts

menu that enables

or disables the Accessibility menu functions.

N The remote control may differ by its model.

MIC

: Use the microphone with the Voice Control and Voice functions.

: Turns the TV on and off.

SOURCE: Displays and selects the available video sources.

MENU/123: Press this button to display the On-Screen Remote

on the TV's screen. Displays numeric buttons, content control

button, and other function buttons on the screen so that you

can run a function conveniently.

– Press and hold this button to run the

Voice Recognition

function.

POINTER: Place a finger on the

POINTER

button and move the

Samsung Smart Control. The pointer on the screen moves in

the direction you moved the Samsung Smart Control. Press the

POINTER

button to select or run a focused item.

: Changes the volume.

: Changes the channel.

: Moves the focus, and changes the values seen on

the TV's menu.

(Enter): Press this button to select or run a focused item.

– Press and hold this button to display the

Guide

RETURN

: Press this button to return to the previous menu.

–

EXIT: Press and hold this button to exit the currently

running function on the TV's screen.

: Use these buttons with a specific feature according to the

directions on the TV's screen.

EXTRA

: Displays related information about the current program.

SMART HUB

: Press this button to bring up

Smart Hub

applications. (See the e-Manual chapter, "Smart Features >

Smart Hub.")

N The button names above may be differ from the actual names.

Pairing the TV to the Samsung Smart Control

If your Samsung Smart Control is not paired to your TV, press and hold

the buttons labeled ① and ② simultaneously for 3 seconds or more to

pair the Samsung Smart Control to the TV.

N The Samsung Smart Control can only be paired to one TV at a time.

[JU7500-ZS]BN68-07050K-02L02.indb 5 2015-03-26 �� 8:35:01

English - 6

Installing batteries into the Samsung Smart Control

To use the Samsung Smart Control, push the rear

cover open in the direction of the arrow and insert

the batteries as shown in the figure. Make sure that

the positive and negative ends are facing the correct

direction.

N Alkaline batteries are recommended for longer

battery life.

Setting Up and Using a Smart TV

Connecting to a Network

Connecting the TV to a network gives you access to online services such as Smart Hub and lets you update the

TV's software online directly from Samsung.com.

Network Connection - Wireless

Connect the TV to the Internet using a standard wireless router or modem.

Wireless IP Router or Modem

that has a DHCP Server

LAN Cable (Not Supplied)

The LAN Port on the Wall

Network Connection - Wired

TV Rear Panel

Connect your TV to your network using a LAN cable.

N The TV does not support network speeds less than or equal to 10 Mbps.

N Use Cat 7 cable for the connection.

[JU7500-ZS]BN68-07050K-02L02.indb 6 2015-03-26 �� 8:35:02

English - 7

The e-Manual

The embedded e-Manual contains information about the key features of your TV.

N You can download and view a printable version of the e-Manual on the Samsung website.

Displaying the e-Manual:

• On the Samsung Smart Control, press the

MENU/123

button, and then select

e-Manual

on the On-

Screen Remote.

• On the TV’s menu, select

Support

e-Manual

Using the buttons available on the main screen of the

e-Manual

Select an item from the search results to load the corresponding page.

Index

Select a keyword to navigate to the relevant page.

Recently Viewed Topics

Select a topic from the list of recently viewed topics.

Accessing the associated menu screen from an e-Manual

topic page

Try Now Access the associated menu item and try out the feature directly.

Link Access a topic referred to on an e-Manual topic page.

Accessing the associated e-Manual topic from a menu

screen

Press the

MENU/123

button on the Samsung Smart Control, then select

e-Manual

on the On-Screen Remote to

read the e-Manual topic about a current screen menu function.

N The e-Manual cannot be accessed from some menu screens.

Updating the e-Manual to the latest version

You can update the e-Manual in the same way you update apps.

[JU7500-ZS]BN68-07050K-02L02.indb 7 2015-03-26 �� 8:35:02

English - 8

Troubleshooting and Maintenance

Troubleshooting

If the TV seems to have a problem, first review this list of possible problems and solutions. Alternatively, review

the Troubleshooting Section in the e-Manual. If none of the troubleshooting tips apply, visit www.samsung.com/

support or call Samsung Customer Service.

N For detailed information on troubleshooting, watch the troubleshooting videos at www.samsung.com/spsn.

N This TFT LED panel is made up of sub pixels which require sophisticated technology to produce. There

may be, however, a few bright or dark pixels on the screen. These pixels will have no impact on the

performance of the product.

N To keep your TV in optimum condition, upgrade to the latest software. Use the Update Now or Auto Update

functions on the TV's menu (

MENU >

Support

Software Update

Update now

or MENU >

Support

Software Update

Auto Update

Issues Solutions and Explanations

The TV is not powered on.

Make sure that the power cord is connected and that the remote has live batteries and is

functioning properly. If the power cord is properly connected and the remote control is operating

normally, there might arise a problem with the antenna cable connection, or the cable/satellite box

might not be turned on. Check the antenna connection or turn on the cable/satellite box.

The TV won’t turn on.

Make sure the AC power cord is securely plugged in to the wall outlet and the TV.

Make sure the wall outlet is working.

Try pressing the

button on the TV to make sure the problem is not the remote. If the TV turns

on, refer to “Remote control does not work” below.

There is no picture/video.

Check the cable connections. Remove and reconnect all cables connected to the TV and external

devices.

Set the video outputs of your external devices (Cable/satellite Box, DVD, Blu-ray etc) to match

the TV's input connections. For example, if an external device’s output is HDMI, it should be

connected to an HDMI input on the TV.

Make sure your connected devices are powered on.

Be sure to select the correct input source.

Reboot the connected device by unplugging it, and then reconnecting the device’s power cable.

The remote control does not

work.

Replace the remote control batteries. Make sure the batteries are installed with their poles (+/–) in

the correct direction.

Clean the sensor’s transmission window on the remote.

Try pointing the remote directly at the TV from 1.5~1.8m away.

The cable/set top box remote

control doesn’t turn the TV on

or off or adjust the volume.

Program the Cable/satellite box remote control to operate the TV. Refer to the Cable/satellite box

user manual for the SAMSUNG TV code.

[JU7500-ZS]BN68-07050K-02L02.indb 8 2015-03-26 �� 8:35:02

English - 9

Warning for One Connect Mini

When you connect or disconnect the One Connect Mini cable, the TV reboots with a reboot warning message.

Eco Sensor and screen brightness

Eco Sensor adjusts the brightness of the TV automatically. This feature measures the light in your room and

optimizes the brightness of the TV automatically to reduce power consumption. If you want to turn this off, go to

MENU >

System

Eco Solution

Eco Sensor

N If the screen is too dark while you are watching TV in a dark environment, it may be due to the

Eco Sensor

N Do not block the sensor with any object. This can decrease picture brightness.

Caring for the TV

N If a sticker was attached to the TV screen, some debris can remain after you remove the sticker. Please

clean the debris off before watching TV.

N The exterior and screen of the TV can get scratched during cleaning. Be sure to wipe the exterior and

screen carefully using a soft cloth to prevent scratches.

Do not spray water or any liquid directly onto the TV. Any liquid

that goes into the product may cause a failure, fire, or electric

shock.

Turn off the TV, then gently wipe away smudges and fingerprints

on the screen with a micro-fiber cloth. Clean the body of the TV

with a soft cloth dampened with a small amount of water. Do

not use flammable liquids (benzene, thinners, etc.) or a cleaning

agent. For stubborn smudges, spray a small amount of screen

cleaner on the cloth.

[JU7500-ZS]BN68-07050K-02L02.indb 9 2015-03-26 �� 8:35:03

English - 10

Specifications and Other Information

Specifications

Display Resolution 3840 x 2160

Environmental Considerations

Operating Temperature

Operating Humidity

Storage Temperature

Storage Humidity

50°F to 104°F (10°C to 40°C)

10% to 80%, non-condensing

-4°F to 113°F (-20°C to 45°C)

5% to 95%, non-condensing

Stand Swivel (Left / Right) 0˚

Sound (Output) 40W (L10+R10+WooferL10+WooferR10)

Model Name UN48JU7500

Screen Curvature 3000R

Screen Size

(Diagonal)

48˝ Class

(47.6 measured diagonally)

Dimensions (W x H x D)

Body

With stand

1081.6 x 632.8 x 118.7 mm

1081.6 x 681.8 x 308.6 mm

Weight

Without Stand

With Stand

12.6 kg

15.5 kg

Model Name UN55JU7500 UN65JU7500

Screen Curvature 4200R

Screen Size

(Diagonal)

55˝ Class

(54.6 measured diagonally)

65˝ Class

(64.5 measured diagonally)

Dimensions (W x H x D)

Body

With stand

1238.5 x 718.3 x 113.7 mm

1238.5 x 770.1 x 308.6 mm

1457.1 x 845.5 x 132.6 mm

1457.1 x 898.0 x 335.4 mm

Weight

Without Stand

With Stand

17.4 kg

20.3 kg

26.3 kg

30.6 kg

[JU7500-ZS]BN68-07050K-02L02.indb 10 2015-03-26 �� 8:35:03

English - 11

Design and specifications are subject to change without prior notice.

N The actual appearance of the TV may differ from the images in this manual, depending on the model.

N For information about the power supply, and more information about power consumption, refer to the label

attached to the product.

Standby mode

When you shut the TV off, it enters Standby mode. In Standby mode, it continues to draw a small amount of

power. To decrease power consumption, unplug the power cord when you don't intend to use the TV for a long

time.

Licenses

The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or

registered trademarks of HDMI Licensing LLC in the United States and other countries.

Still image warning

Avoid displaying still images (such as jpeg picture files), still image elements (such as TV channel logos, stock

or news crawls at the screen bottom etc.), or programs in panorama or 4:3 image format on the screen. If

you constantly display still pictures, it can cause image burn-in on the LED screen and affect image quality. To

reduce the risk of this adverse effect, please follow the recommendations below:

•

Avoid displaying the same TV channel for long periods.

•

Always try to display any image in full screen. Use the picture format menu of the TV set for the best

possible match.

•

Reduce brightness and contrast to avoid the appearance of after-images.

•

Use all TV features designed to reduce image retention and screen burn. Refer to the e-Manual for details.

[JU7500-ZS]BN68-07050K-02L02.indb 11 2015-03-26 �� 8:35:03

English - 12

TV Installation

Mounting the TV on a wall

If you mount this product on a wall, follow the instructions exactly as recommended by the

manufacturer. Unless it is correctly mounted, the product may slide or fall, thus causing serious

injury to a child or adult and serious damage to the product.

Installing the wall mount kit

You can mount the TV on the wall using a wall mount kit (sold separately). For models providing wall mount

adapters, install them as shown in the figures below before installing the wall mount kit.

N Refer to the installation manual included with the Samsung wall mount kit.

Before you install the screws for the wall mount, put the Styrofoam that came with the TV's packaging on the TV

to protect it. Then, lay the TV down and attach the screws.

N The Styrofoam is not provided for the 40-inch or less TVs.

To mount both a soundbar and the TV onto a wall using the wall mount, mount the soundbar onto the TV first,

and then mount the TV/Soundbar combination onto the wall mount. For detailed information, see the instructions

provided with the soundbar.

N The soundbar installation with the wall mount may not be supported for the specific region or model.

Wall mount

Bracket

Wall mount

Adapter

For detailed information about installing the wall mount, see the instructions provided with the wall mount kit.

We recommend that you contact a technician for assistance when installing the wall mount bracket. We do not

advise you to do it yourself. Samsung Electronics is not responsible for any damage to the product or injury to

yourself or others if you choose to install the wall mount on your own.

[JU7500-ZS]BN68-07050K-02L02.indb 12 2015-03-26 �� 8:35:04

English - 13

VESA wall mount kit notes and specifications

You can install your wall mount on a solid wall perpendicular to the floor. Before attaching the wall mount to

surfaces other than plaster board, contact your nearest dealer for additional information. If you install the TV on

a ceiling or slanted wall, it may fall and result in severe personal injury.

Standard dimensions for wall mount kits are shown in the table below.

If you are installing a third-party wall mount, note that the length of the screws you can use to attach the TV to

the wall mount is shown in column C in the table below.

Product

Family

TV size in inches

VESA screw hole specs

(A * B) in millimeters

C (mm) Standard Screw Quantity

UHD-TV

[Curved]

400 X 400

32.0 ~ 31.0

M8 4

55 - 65 32.2 ~ 31.2

Do not install your wall mount kit while your TV is turned on. This may result in personal injury from

electric shock.

•

For wall mounts that do not comply with the VESA standard screw specifications, the length of

the screws may differ depending on the wall mount specifications.

•

Do not fasten the screws too firmly. This may damage the product or cause the product to fall,

leading to personal injury. Samsung is not liable for these kinds of accidents.

•

Samsung is not liable for product damage or personal injury when a non-VESA or non-

specified wall mount is used or the consumer fails to follow the product installation

instructions.

•

Do not mount the TV at more than a 15 degree tilt.

•

Always have two people mount the TV onto a wall.

Providing proper ventilation for your TV

When you install your TV, maintain a distance of at least 10 cm between the TV and other objects (walls,

cabinet sides, etc.) to ensure proper ventilation. Failing to maintain proper ventilation may result in a fire or a

problem with the product caused by an increase in its internal temperature.

When you install your TV with a stand or a wall mount, we strongly recommend you use parts provided by

Samsung Electronics only. Using parts provided by another manufacturer may cause difficulties with the

product or result in injury caused by the product falling.

Installation with a stand Installation with a wall mount

10 cm

[JU7500-ZS]BN68-07050K-02L02.indb 13 2015-03-26 �� 8:35:04

English - 14

Safety Precaution: Securing the TV to the

wall

Caution: Pulling, pushing, or climbing on the TV may cause the TV to fall.

In particular, ensure your children do not hang on or destabilize the TV. This

action may cause the TV to tip over, causing serious injuries or death. Follow

all safety precautions provided in the Safety Flyer included with your TV. For

added stability and safety, you can purchase and install the anti-fall device

as described below.

Preventing the TV from falling

These are general instructions. The clamps, screws, and string are not supplied by Samsung. They must be

purchased separately. We suggest consulting an installation service or professional TV installer for specific

hardware and anti-fall hardware installation.

1. Put the screws into the clamps and firmly fasten them onto the wall. Confirm that the screws have been

firmly installed onto the wall.

N You may need additional material such as an anchor depending on the type of wall.

2. Remove the screws from the back center of the TV, put the screws into

the clamps, and then fasten the screws onto the TV again.

N These screws may not be supplied with the TV. For a 48 ~ 65 class

model, purchase M8 screws.

3. Connect the clamps fixed onto the TV and the clamps fixed onto the wall

with a durable, heavy-duty string, and then tie the string tightly.

N Install the TV near to the wall so that it does not fall backwards.

N Connect the string so that the clamps fixed on the wall are at the

same height as or lower than the clamps fixed on the TV.

N Untie the string before moving the TV.

4. Make sure that all connections are properly secured. Periodically check

the connections for any sign of fatigue or failure. If you have any doubt

about the security of your connections, contact a professional installer.

Arranging the cables with the Cable guide

[JU7500-ZS]BN68-07050K-02L02.indb 14 2015-03-26 �� 8:35:05

This page is intentionally

left blank.

[JU7500-ZS]BN68-07050K-02L02.indb 15 2015-03-26 �� 8:35:05

Español - 2

Advertencia! Instrucciones de seguridad importantes

Lea las instrucciones de seguridad antes de utilizar el televisor.

PRECAUCIÓN

RIESGO DE DESCARGA ELÉCTRICA, NO ABRIR

PRECAUCIÓN: A FIN DE REDUCIR EL RIESGO DE

DESCARGA ELÉCTRICA, NO RETIRE LA TAPA (NI LA PARTE

TRASERA). NO CONTIENE PIEZAS QUE EL USUARIO

PUEDA REPARAR. ENCOMIENDE LAS REPARACIONES AL

PERSONAL CALIFICADO.

Este símbolo indica que el dispositivo contiene

alto voltaje. Es peligroso establecer cualquier

tipo de contacto con cualquier parte interna del

producto.

Este símbolo indica que con este producto se

incluye documentación importante relativa a la

operación y el mantenimiento.

Las ranuras y aberturas del gabinete y en la parte posterior o inferior del dispositivo son para proporcionar la ventilación necesaria. A

fin de garantizar el funcionamiento confiable de este aparato y para evitar que se recaliente, dichas ranuras y aberturas nunca deben

bloquearse ni cubrirse.

N No coloque este aparato en un espacio cerrado, como una estantería o un gabinete integrado, a menos que se proporcione la

ventilación suficiente.

N No coloque este aparato cerca o sobre un radiador o calefactor, ni en un lugar expuesto a la luz directa del sol.

N No coloque recipientes (jarrones, etc.) con agua sobre este aparato ya que podría representar riesgo de incendio o descarga

eléctrica.

No exponga este aparato a la lluvia ni lo coloque cerca del agua (cerca de una bañera, lavamanos, pileta de la cocina o recipientes

para lavar la ropa ni cerca de una piscina, etc.). Si el aparato se mojara accidentalmente, desenchúfelo y comuníquese con un

distribuidor autorizado de inmediato.

Este aparato utiliza pilas. En su comunidad pueden existir normativas ambientales que exijan que deseche las pilas adecuadamente.

Comuníquese con las autoridades locales para obtener información sobre disposición y reciclaje.

No sobrecargue las tomas de pared, los cables de extensión ni los adaptadores más allá de su capacidad, dado que puede provocar

un incendio o una descarga eléctrica.

Los cables de alimentación deben colocarse de forma que no puedan pisarse ni quedar atrapados por objetos encima o contra ellos.

Preste especial atención a los extremos del cable en las tomas de pared y en el punto en el que salen del aparato.

A fin de proteger el aparato contra las tormentas eléctricas o cuando no se lo utiliza durante períodos prolongados, desenchúfelo de la

toma de pared y desconecte la antena o el sistema de cable. Eso evitará que el aparato sufra daños por rayos y picos de tensión.

Antes de conectar el cable de alimentación de CA a la salida del adaptador de CC, asegúrese de que la denominación de voltaje del

adaptador de CC se corresponda con el suministro eléctrico local.

No inserte ningún objeto metálico en las partes abiertas del aparato. Hacerlo puede generar el riesgo de descarga eléctrica.

Para evitar una descarga eléctrica, nunca toque el interior del aparato. Únicamente un técnico calificado debe abrir el aparato.

Asegúrese de enchufar el cable de alimentación hasta que esté insertado firmemente. Cuando desconecte el cable de una toma de

pared, asegúrese de jalar el enchufe del cable. Nunca desenchufe jalando el cable. No toque el cable de alimentación con las manos

mojadas.

Si el aparato no funciona normalmente, en especial si emite sonidos u olores extraños, desenchúfelo de inmediato y comuníquese con

un distribuidor o centro de servicio autorizado.

Asegúrese de desenchufar el enchufe de la toma si el televisor no se usará o si no va a estar en casa por un período prolongado (en

especial cuando niños, ancianos o personas discapacitadas quedarán solas en la casa).

N El polvo acumulado puede provocar una descarga eléctrica, una fuga de electricidad o un incendio al hacer que el cable de

alimentación suelte chispas o calor o al deteriorarse el aislamiento.

Asegúrese de contactarse con un centro de servicio autorizado para obtener información si va a instalar su televisor en un lugar con

mucho polvo, temperaturas altas o bajas, altos niveles de humedad, sustancias químicas, o en lugares donde vaya a funcionar las 24

horas del día, como aeropuertos, estaciones de ferrocarril, etc. No hacerlo puede provocar daños graves al televisor.

Use únicamente un enchufe y una toma de pared con una conexión a tierra adecuada.

N Una conexión a tierra no adecuada puede provocar una descarga eléctrica o daños al equipo. (Únicamente para los equipos

Clase l).

Para apagar este aparato completamente debe desconectarlo de la toma de pared. Asegúrese de que la toma de pared y el enchufe

sean fácilmente accesibles.

No permita que los niños se cuelguen del producto.

Almacene los accesorios (pilas, etc.) en un lugar fuera del alcance de los niños.

No instale el producto en un lugar inestable, como un estante flojo, un piso inclinado o un lugar expuesto a la vibración.

No deje caer el producto ni lo golpee. Si el producto se daña, desconecte el cable de alimentación y comuníquese con un centro de

servicio.

Para limpiar este aparato, desconecte el cable de alimentación de la toma de pared y limpie el aparato con un paño suave y seco. No

use sustancias químicas como cera, benceno, alcohol, diluyentes, insecticida, desodorantes ambientales, lubricantes o detergente.

Estos productos químicos pueden dañar el aspecto del televisor o borrar las impresiones del producto.

No exponga este aparato a goteos ni salpicaduras.

No deseche las pilas en el fuego.

No genere un cortocircuito, desensamble ni recaliente las pilas.

Existe el riesgo de explosión si reemplaza las pilas usadas del control remoto por otras de un tipo incorrecto. Reemplácelas

únicamente por el mismo tipo o un tipo equivalente.

ADVERTENCIA - A FIN DE EVITAR QUE SE DISEMINE EL FUEGO, MANTENGA LAS VELAS O LAS LLAMAS ABIERTAS

ALEJADAS DEL PRODUCTO EN TODO MOMENTO.

* Las figuras e ilustraciones de este Manual del usuario se ofrecen como referencia solamente y pueden ser distintas del

aspecto real del producto. El diseño y las especificaciones del producto están sujetos a cambios sin previo aviso.

Antes de usar el equipo lea este manual para evitar fallas y guarde para futuras referencias.

[JU7500-ZS]BN68-07050K-02L02.indb 2 2015-03-26 �� 8:35:05

Español - 3

¿Qué hay en la caja?

Samsung Smart Control & Pilas (AA x 2)

Manual del usuario

Cable de alimentación

Tarjeta de garantía / Guía de información legal

(no disponible en algunos lugares)

Adaptador AV Adaptador de componentes Adaptador del montaje de pared

One Connect Mini One Connect Mini cable

N Asegúrese de que los siguientes elementos estén incluidos con su televisor. Si falta algún elemento,

comuníquese con su distribuidor.

N Los colores y las formas pueden variar según el modelo.

N Los cables no incluidos pueden adquirirse por separado.

N Verifique que no haya accesorios ocultos en los materiales de empaque cuando abra la caja.

N Para usar la función 3D debe adquirir los lentes 3D.

Advertencia: Las pantallas se pueden dañar si se ejerce presión

directa sobre ellas al manejarlas incorrectamente. Recomendamos

levantar el televisor por los bordes como se muestra en la imagen.

¡No toque

esta

pantalla!

[JU7500-ZS]BN68-07050K-02L02.indb 3 2015-03-26 �� 8:35:06

Español - 4

Configuración inicial

La primera vez que encienda el televisor, se iniciará inmediatamente la configuración inicial. Durante la

configuración inicial, el televisor se vincula con el Samsung Smart Control, se conecta con su red local,

implementa los acuerdos de Smart Hub, se conecta a la fuente de su señal de TV en vivo y configura su

receptor de cable o decodificador.

Para saber más acerca de cómo operar el televisor, inicie el e-Manual incorporado en el televisor después de

haber completado la configuración inicial.

Uso del controlador del televisor

Puede usar el controlador del televisor que está en la parte trasera en vez del control remoto para manejar la

mayoría de las funciones de su televisor.

Menú de control

Sensor de control remoto

Tecla de control

encuentra en la esquina

inferior izquierda de la

parte trasera del televisor.

: Abre

Smart Hub

: Abre el menú.

: Selecciona un origen.

: Apaga el televisor.

[JU7500-ZS]BN68-07050K-02L02.indb 4 2015-03-26 �� 8:35:06

Español - 5

El Samsung Smart Control

: Presione este botón para silenciar el sonido temporalmente.

–

: Mantenga presionado este botón para que aparezca el menú

Atajos de accesibilidad

que activa o desactiva las funciones del menú de accesibilidad.

N El control remoto puede variar dependiendo del modelo.

MIC

: Utilice el micrófono con las funciones de Control de voz y Voz.

: Enciende y apaga el televisor.

SOURCE: Muestra y selecciona las fuentes de video disponibles.

MENU/123: Presione este botón para mostrar el control remoto

en la pantalla del televisor. Muestra los botones numéricos, el

botón de control de contenidos y otros botones de funciones en

la pantalla a fin de que pueda ejecutar una función de manera

conveniente.

– Mantenga presionado este botón para ejecutar la función

Reconocimiento de voz

POINTER: Coloque un dedo sobre el botón

POINTER

y mueva el

Samsung Smart Control. El puntero en la pantalla se mueve en la

dirección en que se mueve el Samsung Smart Control. Presione el

botón

POINTER

para seleccionar o ejecutar el elemento resaltado.

y: Cambia el volumen.

z: Cambia el canal.

< > ¡ £: Mueve el enfoque y cambia los valores que se ven en

el menú del televisor.

(Entrar): Presione este botón para seleccionar o ejecutar el

elemento resaltado.

– Mantenga presionado este botón para mostrar la

Guía

RETURN

: Presione este botón para regresar al menú anterior.

–

EXIT: Mantenga presionado este botón para salir de la

función que se está ejecutando actualmente en la pantalla del

televisor.

: Utilice estos botones con una función específica siguiendo las

instrucciones en la pantalla del televisor.

EXTRA

: Muestra información acerca del programa actual.

SMART HUB

: Presione este botón para que aparezcan las

aplicaciones

Smart Hub

. (Consulte el capítulo de "Funciones

Smart > Smart Hub" del e-Manual).

N Los nombres de los botones anteriores pueden ser diferentes de los reales.

Vinculación del televisor al Samsung Smart Control

Si el Samsung Smart Control no está vinculado al televisor, mantenga

presionados los botones etiquetados como ① y ② simultáneamente

durante 3 segundos o más para vincular el Samsung Smart Control al

televisor.

N El Samsung Smart Control solo puede vincularse a un televisor a la

vez.

[JU7500-ZS]BN68-07050K-02L02.indb 5 2015-03-26 �� 8:35:07

Español - 6

Colocación de las pilas en el Samsung Smart Control

Para usar el Samsung Smart Control, presione la tapa

posterior para abrirla en la dirección que indica la

flecha e inserte las pilas como se muestra en la figura.

Asegúrese de que los polos positivos y negativos estén

en la dirección correcta.

N Se recomienda usar pilas alcalinas para una mayor

duración de las pilas.

Configuración y uso de un Smart TV

Conexión a una red

Conectar el televisor a una red le da acceso a servicios en línea tales como el Smart Hub, y le permite actualizar

el software del televisor en línea directamente desde Samsung.com.

Conexión de red inalámbrica

Conecte el televisor a Internet utilizando un enrutador o un módem inalámbrico estándar.

Enrutador IP inalámbrico o Módem

que tiene un servidor DHCP

Cable LAN (no suministrado)

Puerto LAN en la pared

Conexión de red cableada

Panel posterior del TV

Conecte el televisor a la red usando un cable LAN.

N El televisor no admite velocidades de red inferiores o iguales a 10 Mbps.

N Use un cable Cat 7 para la conexión.

[JU7500-ZS]BN68-07050K-02L02.indb 6 2015-03-26 �� 8:35:08

Page is loading ...

Samsung UN55JU7500H Quick start guide

Brand: Samsung

Model: UN55JU7500H

Category: LED TVs

Type: Quick start guide

This manual is also suitable for

Download PDF

report

in other languages

español: Samsung UN55JU7500H Guía de inicio rápido

Samsung UN55JU7500H Quick start guide

This manual is also suitable for

Samsung UN55JU7500H Quick start guide

in other languages

Related papers