Jay-tech 968R User manual

Category
Portable DVD/Blu-Ray players
Type
User manual

Jay-tech 968R is a portable DVD player with perfect sound and display output, suitable for use in various settings, including offices, indoors, hotels, and cars. It features a built-in battery with a long lifespan, allowing for extended use without the need for an external power source. The player supports a wide range of media formats, including DVDs, CDs, MP3s, JPEGs, and USB drives, providing versatility and entertainment options. Additionally, it has TV functions, enabling users to connect it to a TV for a larger viewing experience.

Jay-tech 968R is a portable DVD player with perfect sound and display output, suitable for use in various settings, including offices, indoors, hotels, and cars. It features a built-in battery with a long lifespan, allowing for extended use without the need for an external power source. The player supports a wide range of media formats, including DVDs, CDs, MP3s, JPEGs, and USB drives, providing versatility and entertainment options. Additionally, it has TV functions, enabling users to connect it to a TV for a larger viewing experience.

CONTENT
Preface...........................................................................................1
Notice.............................................................................................1
Protection of Power Cable .............................................................2
Precautions and Maintenance........................................................2
Instructions for Using the Built-in Battery.......................................3
Precautions ................................................................................3
Methods of Using the Battery.....................................................3
Appearance Instruction..................................................................4
Function Keys on the Player.......................................................4
Right Side of the Player..............................................................5
Left Side of the Player................................................................5
Back Side of the Player..............................................................5
Front side of the Panel ...............................................................6
Remote Control Introductions ........................................................6
Precautions....................................................................................6
Connection with TVs......................................................................9
Basic Operation........................................................................10
System Setup...............................................................................10
Menu Setup.................................................................................. 11
Language Setup...........................................................................12
CD Copy Function........................................................................13
Play MP3/JPEG Disc................................................................13
Read USB disc and SD/MMC Cards........................................14
Playing Games.............................................................................14
Digital TV Functions.....................................................................15
Connections with PC....................................................................23
Trouble Shooting..........................................................................24
Specifications...............................................................................25
DVD Technical Parameter ........................................................25
TV Technical Parameter...........................................................25
List of Accessories....................................................................25
1
Preface
Thanks for choosing our portable DVD player. Please read this instruction manual
carefully before using and keep it properly for later reference.
This is a new DVD player with perfect sound and display output. It is suitable to be used
in office(s), indoor, hotel(s), car(s), and so on.
Notice
Non-professional staffs do not touch the laser lens. Please wash hands before cleaning
up the laser lens or go for professional maintenance sites, so as to avoid electrostatic
breakdown or damage to the laser lens.
Safety Instruction
z Please read this instruction manual carefully before using it, and keep it properly
for later reference.
z In order to prevent fire or electrical shock, please do not expose this device to rain
or damp environment!
Note: In order to prevent fire or
electrical shock, please do not open
the cover of the device; otherwise,
damage might be incurred.
The lightning mark in a black triangle warns the user to be
careful of electrical shock because of high voltage
contained inside.
The exclamation mark in a black triangle warns the user
that important instructions for operation and assistance
are provided.
Class-1 Laser Product
Laser product mark: This mark is on the rear panel of the
device, indicating that class-1 laser beam is weak that
there is no radiation hazard outside of the device.
CAUTION
RISK OF ELECTRIC SHOCK
2
Protection of Power Cable
1. To disconnect the AC power cord, pull the plug out from the connector.
2. Please do not place the AC power cord close to any heat source.
3. Please do not place heavy objects on the AC power cord.
4. Please do not disassemble and repair AC power cord by yourself.
5. This player is class-I laser product and with “Class-I” remark.
6. This product contains a low-power laser device. In case service or
internal-component adjustment is needed, please contact nearby distributors and
seek for professional technical help.
Precautions and Maintenance
1. Please do not place the device in a sealed container to protect it from high
temperature.
2. Please do not place the device under direct sunlight or close to any heat sources.
3. Please do not place the device close to objects with magnetic field.
4. Please do not place the device near liquid area. If incidentally liquid penetrates into
the device, please remove the plug immediately and seek for technician’s
assistance.
5. Please place the device on a horizontal surface, and do not place heavy objects on
top of the device.
6. Please use standby mode when the player is suspended. Please remove the AC
power cord or lithium battery if not being used in a long time.
7. Please do not put your fingers or other objects into the device.
8. The disk-drive read header will have dew drop under the following conditions:
(1) The device is being opened for a long time.
(2) In a room with steam or damp.
(3) Move the device from a low to a high temperature environment.
9. In order to prevent fire, electrical shock, or device damage, do not use cleaning fluid
or spray.
10. There might be interference on the screen if you watch TV and the DVD disk is still
playing due to different TV types. For better image quality, please turn DVD disk off
when you watch TV.
11. Please do not repair this DVD player by yourself.
3
12. The image quality might be reduced if there are muddiness or scratch on the LCD
screen.
Instructions for Using the Built-in Battery
Precautions
High-capacity rechargeable lithium battery is built-in in this player, it is strictly forbidden
to take the battery apart by your own. Seek for professional technicians’ assistance to
replace the battery for you.
1. Please do not throw the battery into fire or to any heat area; please also do not
store the battery in any area that is having high temperature.
2. Please do not remove the battery when it is in use or being charged.
3. Please do not connect the anode with the cathode of the battery directly as it may
cause serious battery damage.
4. Please do not have the battery the battery immerse into water or any other liquids;
please keep the battery away from damp area when storage it.
5. Please do not stab, hammer, or trample the battery.
6. If you want to have a rest or sleep, or the player is not to be used for a long time,
please unplug the power adaptor of the player and turn off the power switch to
prevent battery damage, and any incident caused by overcharging.
7. When lithium battery is being used on the device, it is advised to adjust the volume
to the middle (small volume shall save more battery power) to prolong the power
consumption time of the battery. This is also useful during your trip.
Methods of Using the Battery
1. For first-time use, the battery power should be used up before recharging and the
battery must be fully charged for about 4 to 5 hours.
2. It can be used under an ambient temperature between -5°C and 40°C.
3. The charging LED light indicates the charging status.
4. Charging operation procedures:
z Plug in power.
z The red LED light is on after the power is being connected, and the battery
begins to be charged.
z When the charging red LED light turns to yellow, it indicates that the battery is
fully charged.
4
Appearance Instruction
Function Keys on the Player
1. Mode: Function mode switch (DVD/AV/TV switch).
2. USB/SD: USB/SD switch.
3. SETUP: Press this button to set the function of the DVD player.
4.
: Press this button to move the cursor upwards and TV Channel increase.
5.
: Press this button to move the cursor downwards, and TV Channel
decrease.
6.
: Press this button to move the cursor leftward.
7.
: Press this button to move the cursor rightwards.
8.
: This button is for choosing previous section.
9.
: This button is for choosing next section.
10.
: Fast reverse.
11.
: Fast forward.
12.
: Stop
5
13. : Press this button to Play / Pause.
14. VOL- : Decrease the volume.
15. VOL+ : Increase the volume.
16. MENU : Menu setup for displaying.
17. CD Door Open / Close
Right Side of the Player
1. Power Input: DC IN 14.5V
2. Power Button: On / Off
3. AV IN: External AUDIO / VIDEO input
4. AV OUT: AUDIO / VIDEO output
5. Earphone port
6. SD/MMC Card slot
7. USB: USB socket
Left Side of the Player
1. GAME1/2: Game Control Pad socket
2. VGA: Connect with LCD monitor by VGA.
Back Side of the Player
1. ANT: TV Antenna connector
6
Front side of the Panel
1. Battery Charging Indicator
Red light: Charging
Yellow light: Full
2. Power Indicator
Blue light: On
3. Remote Control Sensor
Remote Control Introductions
Installation of Remote Control Battery
1. Flip to the back of the remote control and remove the lid.
2. According to the battery polarity position, correctly insert two sections of AAA
batteries.
3. Put back and close the lid accordingly.
Precautions
1. Do not use rechargeable batteries.
2. Do not mix different brands and types of batteries.
3. Do not use new and old batteries together.
4. When the remote control features are not strong, please replace new batteries.
5. If you do not use the remote control for a long time, please remove the batteries to
avoid the battery liquid leakage which will result in battery corrosion and may
seriously cause the device damage.
6. Do not place the remote control under high temperature or humid area.
7. Do not take the remote control apart.
8. The remote control can work best within 5 meters from the device and within 30
degree angle.
7
Remote Control Appearance
16
17
18
22
23
11
13
1
24 25
26 27
5
12
14
15
19
20
21
10
23
4
6
7
8
9
1 POWER 2 OSD 3 DVD/USB Card
4 MODE 5 Number Buttons 6 AUDIO
7 SUBTITLE 8 ABGLE 9 TITLE / PBC
10 RETURN 11 ZOOM 12 SETUP
13 MENU 14 ENTER 15 Direction Buttons
16 GOTO 17 Play/Pause 18 Stop
19 SLOW 20 REPEAT 21 MUTE
22 VOL+ 23 VOL- 24 Previous
25 Next 26 Fast Reverse 27 Fast Forward
8
1. POWER: Power switch of DVD player.
2. OSD: Display the working status of DVD.
3. DVD/USB Card: Press this button to switch among DVD/USB/CARD interfaces
in the DVD mode.
4. MODE: Press this button to switch the different functions between DVD/TV/AV
modes.
5. Number Buttons: Number buttons can be used to select songs or TV channels.
6. AUDIO: Press [Audio] to switch among multiple audio languages. This function
works only when the disc supports multiple audio languages.
7. SUBTITLE: When playing a DVD or SVCD disc with multilingual subtitles, use
this button to select the required language from the available subtitles languages.
The types and quantities of subtitles depend on the working process of the disc.
DVD disc contains 32 kinds of languages at most while SVCD disc contains 4
kinds at most.
8. ANGLE: Some DVD discs contain images taken from different view of angles.
Press this button to select a different viewing angle.
9. TITLE/PBC: Press this button to stop playing and returns to the title menu of the
disc. Press Direction Buttons to select the menu, or press [Previous] / [Next]
button to turn the pages until you get the menu with title numbers you want to
select, and press number button for selection.
Insert a disc with PBC function. When PBC is on, the screen shall display menu
(which differs from discs with different contents), and press [Previous] / [Next]
button to turn the pages until the page containing the title track serial number;
then press the Number Buttons for selection. When PCB is off, you can not
select a song from the menu interface, disc songs will be played in sequence, or
you may make your selection with Number Buttons or [Previous] / [Next]
button. (PBC function only works for VCD 2.0)
10. RETURN: In the DVD mode, press this button to return to menu when playing
DVD/MP4.
11. ZOOM: Press this button in the state of DVD to enlarge the view by X2, X3, X4 in
order, or to minify the view by X1/2, X1/3, X1/4, OFF in order.
12. SETUP: To enter setup menu.
13. MENU: In the DVD / AV /TV modes, press the button to enter the image, volume,
system, function and time settings.
14. ENTER: Press this button to confirm menu contents or to play disc.
9
15. Direction Buttons: Left, Right, Up (TV mode CH+), Down (TV mode
CH-).
16. GOTO: Press [GOTO], according to different types and contents of discs, the
display on the screen is as the following:
Press [GOTO] once when the disc is being played back, TV screen shall display
the disk type, the number of titles/sections (songs) in the disc, the title
number/section (song) number of the currently playing item, and play time of the
section (song).
Input a designated title, section (song), and time, and then press [Enter] to
activate the designated title, section (song) and play time directly.
17. Play/Pause: Press this button once, and the player shall temporarily stop playing,
image and sound shall stay at static state. Press [Play/Pause] again to resume
normal playing.
18. Stop: Press this button to stop in playing state.
19. Slow: Slow motion playing SLOW 1/2, SLOW 1/3, SLOW 1/4, SLOW 1/5, SLOW
1/6, SLOW 1/7.
20. REPEAT: Press this button to repeatedly play the selected titles/sections (DVD)
or a single song/whole disc (VCD). Press [REPEAT] once, the modes on the
screen is as the following:
For DVD - Repeat Off / Section Repeat / Title Repeat
For SVCD/VCD/CD - Repeat Off / Single Song Repeat / Whole Disc Repeat
21. MUTE: Press this button to turn off the audio and speaker outputs.
22. 23. VOL+/VOL-: Press these buttons to increase or decrease the volume.
24. 25. Previous/Next: Press these buttons during playback to switch to pervious
section or the next section.
26. 27. Fast Reverse/Fast Forward: Press these buttons to enter the mode of fast
reverse or fast forward. Press [PLAY] to resume normal playing mode directly.
Connection with TVs
Note: The AV cable with yellow lotus is used for video signal, and the one with red and
white lotus plugs are for audio signal.
The top output or input signal plug indicates video output, while the lower part contains
two output/input signal plugs. The white one indicates the left sound channel and the red
one indicates the right sound channel. You can adjust the output device switches to
control the volume.
10
Pow
Men
Basic Operation
er Operation
Connect the power adapter with either 220V or 110V power supply, switch the
[Power] to ON, and wait for 3 seconds to turn on the device. The device displays
the latest shutdown state. Switch to the mode you prefer by mode button.
Press [Setup] to enter setting menu interface, select the appropriate function from
the menu setting. The item in brighter color indicates as the selected one, and
press [Enter] to confirm.
u Setup
Press function menu setup button to setup AV OUT, Screen Subtitle, the original
setting etc. Press [Enter] to confirm.
System Setup
1. TV system: Select TV SYSTEM and press [Direction Button] to enter the
submenu. Make your own selection according to the system of the connected TV.
The selected systems are NTSC / PAL / AUTO.
2. Screen Saver: Select Screen Saver and press [Direction Button] to enter
screen saver setup menu, which can be set as On / Off. Start the screen saving
function to enable screen saver when the player is in stop/ open-cabinet/no-disc
modes or the picture keeps in static state for around 60 seconds.
3. Video output (CVBS): Composite audio and video output by connecting the player
to TV with a dedicated cable to enjoy better resolution.
Note: Only the AV cable identical to the special cable provided by the
manufacturer shall be used.
4. TV Type Screen Image Ratio: Select the TV Type and press the [Direction
Button] to enter screen image ratio menu, there are total of three modes for
selection.
z 4:3 PS (panorama scan): For the ordinary TV, left and right margin of the
images shall be cut off when wide screen images are being played in this
mode.
z 4:3 LB (mail box format): This mode can be selected for TV with normal size,
and there are black stripes displays on top and bottom of the screen when
11
wide screen images are being played.
z 16:9 (wide screen): Applicable for wide-screen TV.
Note: 1) The play effect is relevant to the recorded image ratio of the disc,
while some discs can not be played according to the selected image
sizes.
2) For video disc only recorded in 4:3 mode, its playing ratio could only
be 4:3 no matter which screen image size ratio is set.
3) The selection of screen image size ratio should be corresponded to
the screen size ratio of the TV in service.
5. Password:
The initial setting for this item is Password lock mode, neither Rating
can be selected in this mode, nor the password can be modified. If Rating needs
to be set up, you need to press [Number Buttons] to enter the initial password of
this player: 0000, then press [Enter] to setting Rating. If you want to modify the
password, enter the old password first, then enter the new password before press
the [Enter] for confirmation (The valid password shall be in four digits.)
6. Rating: When playing the discs with lock function, you can select the appropriate
age level control according to disc level and your need. The control level is listed
from high to low. Level 1 is the lowest level, and level 8 is the highest. The function
is only applicable for discs with rating restrictions, which can only be set when the
coded lock is activated by setting password, and the coded lock needs to be
locked up after setting so that it can be played in rating restrictions.
7. Default: If this item is selected, every function setting shall be recovered and
return to its initial setting.
Menu Setup
1. Brightness: Press [Direction Button] to move the sliding bar to adjust the
brightness for video output.
2. Contrast: Press [Direction Button] to move the sliding bar to adjust the contrast
for video output.
3. HUE: Press [Direction Button] to move the sliding bar to set up the HUE for video
output.
4. Saturation: Press [Direction Button] to move the sliding bar to adjust the
saturation for video output.
5. Speaker Setup: Dual channels (LT/RT) stereo and virtual surround can be
12
6. Audio Setup Key: Press [Direction Button] to move the sliding bar to select the
Key.
Language Setup
1. OSD Language: Enter OSD Language (On Screen Display language) setup menu,
and press [Direction Button] to select the OSD Language you want, then press
[Enter] for confirmation.
There are 8 options under this item for selection: English / Chinese / German /
Spanish / French / Portuguese / Italian / Russian.
2. Audio LANG: Enter Audio LANG (audio language) setup menu, and press
[Direction Button] to select the audio language you want, then press [Enter] for
confirmation.
There are 8 options under this item for selection: English / Chinese / German /
Spanish / French / Portuguese / Italian / Russian.
3. Subtitle LANG: Enter Subtitle LANG (subtitle language) setup menu, and press
[Direction Button] to select the subtitle language you want, and then press [Enter]
for confirmation.
There are 8 options under this item for selection: English / Chinese / German /
Spanish / French / Portuguese / Italian / Russian.
4. Menu LANG: Enter Menu LANG (menu language) setup menu, and press
[Direction Button] to select the menu language you want, and then press [Enter]
for confirmation.
There are 8 options under this item for selection: English / Chinese / German /
Spanish / French / Portuguese / Italian / Russian.
Note: If the language you select is not a language recorded in the DVD disc,
the player will choose the default language recorded in the disc
automatically.
13
CD Copy Function
Play MP3/JPEG Disc
Play MP3 Disc
Put in MP3 disc, the DVD player will automatically search all the directories in MP3.
When finishing searching, it will play the first directory in MP3 (if the directories in the
same type are not placed in order, it will play the first directory), and then play the
first song in the directory (the cursor stops at “01”). Press [Up / Down] to select any
directory in the directory menu on the left side, and press [Enter] for confirmation.
The device will play the song of the directory selected in order. At this time, you can
press [Number Buttons] to select the song you want to play directly.
Press [Right] to enter the directory play menu, then Press [Up / Down] to select the
song and press [Enter] for confirmation. You can also press [Number Buttons] to
select the song you want to play.
Play JPEG disc
Put in JPEG disc, the DVD player will automatically search all the directories in JPEG.
When the search is finished, the cursor will stop at the first picture.
Press [Up / Down] to select picture file and press [Play] to start playing.
Press [Up / Down] to select picture file and press [Enter] to see the picture in full
screen. At this moment, the picture is in static state. You can press [Zoom]
continuously to enlarge the picture in different times and press [Direction Button] to
make the screen move in different direction.
When the picture is in static state, you can press [Fast Forward Button] to rotate
the picture clockwise and press [Fast Reverse Button] to rotate the picture
counter-clockwise.
Play MP3/JPEG Disc
When playing the disc with MP3 files and JPEG files mixed up, you can press [Right]
to move the cursor to the mark of browsing pictures and press [Enter] to enter
picture-browsing state while playing MP3 files.
Press [Right] again to enter JPEG play menu and then press the [Right] for the third
time to select the picture-play mark on the lower right corner. At this state, you can
select either MP3-play or JPEG-play directly.
14
Select a picture in the JPEG directory menu and press [Play] to play pictures in
order.
Read USB disc and SD/MMC Cards
1. Insert USB disc into the USB interface on the upper right corner or Insert the
card (SD/MMC) into the card slot of the player.
2. Turn on the power - play.
3. You can download MP4 / MP3 / JPG / VCD files into a USB disc to play back.
Note: 1) USB disc and SD/MMC Cards must be played at no disc state so that
the device can detect the USB disc, or SD/MMC cards and then play.
2) Support USB 1.1 to 2.0 standards.
3) DVD can not be played smoothly because the DVD format is not
supported.
Playing Games
1. Please copy game files from the CD to a SD card or USB disk (not included).
Insert the memory card or plug the USB disk into the USB slot to play games.
2. Connect the control pad to the Game Control Pad Socket.
3. Turn on the power, select a game, and start playing.
Note: 1) For first-time using, you should use the remote control to enter the
game.
2) [Number Buttons] and [Previous/Next] on remote control can be
used for page turning and selecting games. Press and hold [Start]
on the game control pad and press [Select Button] at the same
time to return to the main menu.
15
Digital TV Functions
System Setup
When using the DVB-T TV function, make sure the antenna and unit (Portable DVD) are
connected, and the unit is switched on. If finished using the DVD, AV IN or AV OUT
function, press "MODE" key to enter the Digital TV function. If the database hasn’t
television programs, the system interface will appear as follows:
At this point, press the "SETUP" key to enter SETUP menu. This menu includes: channel
manager / installation / software upgrade / factory default / version functions.
Note:
1) If the database has a TV program, when get into the Digital TV mode, the unit will
play the last power outage program;
2) At the first use of Digital TV feature, please enter the SETUP menu, step to "System
Settings System Settings area" menu, select the name of your country, and
then search for channels. Or the unit may not receive Digital TV signals. (See page
26 for specific action "regional" option)
3) The Digital TV functionality requires opening of the local government digital TV signal.
If the connection under normal conditions, the unit still can not receive TV signals,
please contact with your local digital TV signal-operator.
1. Channel Manager
In this menu you can delete the existing programs.
Enter into the Digital TV Set interface, use
/ buttons to select "CHANNEL
MANAGER", press ENTER key to enter the channel manager to set options:
Delete All
In the interface, press ENTER key will delete all the programs, and then the screen will
appear that you should enter the password to accomplish it:
¾ If you confirm the deletion of programs saved the system, please enter the original
16
password "8888", and then it will enter the following interface. If you do not want to
delete, press "Return or SETUP" key to return the previous menu.
¾ In this interface, press / buttons to move the cursor to the option you want
to delete, press "ENTER" key to enter the delete option, press the
/ buttons to
select "YES" or "NO" and press ENTER to confirm.
2. Installation:
Installation this option is for searching television or radio programs, the option includes:
Area Search / Manual Search / Auto Search function;
Enter into the Digital TV Set interface, use the
/ button to select the
"INSTALLATION" option, press the ENTER key to enter the installation settings options:
17
2.1 Area Search:
Regional search program is a smart way to facilitate the program searches, it can
choose according to your country (region), and the search of the area or region of the
country shows all the channels.
In INSTALLATION interface, use the
/ key to move the cursor to the AREA
SEARCH option, press the ENTER key to enter the Channel search:
¾ In the program search process you can stop the program search by pressing "back"
button. When the program search is completed, the system will automatically save
the search programs.
2.2 Manual Search:
When you are very familiar of the digital television information, you can choose to use
the manual search function, which can help you save more time.
¾ In INSTALLATION interface, use the
/ key to move the cursor to the Manual
SEARCH option, press the ENTER key to enter the Channel search:
¾ Before you use the manual search, please set the parameters, including the
following two options:
A. Freq (KHz) Scan frequency: you can use the remote control keys 0-9 to modify.
18
B. Bandwidth: Sets the current scanning frequency transmission of broadband, you can
press
/ buttons to select 6MHz, 7MHz, 8MHz, the machine defaults to 8
MHz.
2.3 Auto Search:
Search for any band program;
¾ In INSTALLATION interface, use the
/ key to move the cursor to the Auto
SEARCH option, press the ENTER key to enter the Channel search:
¾ In the auto search program, you can set the following items:
A. Start Freq (KHz) initial frequency: you can use the remote control keys 0-9 to modify.
B. End Freq (KHz) frequency end: you can use the remote control keys 0-9 to modify.
C. Band Width: you can press
/ buttons to select 6MHz, 7MHz, 8MHz, the
machine defaults to 8 MHz.
¾ After setting up, press ENTER to enter search interface.
¾ Click "RETURN or SETUP" key return previous menu.
3. Configuration
This option provides a personalized system settings function. You can set up the system
according to your preferences and needs.
Get into the Digital TV set interface, use the
/ buttons to select
"CONFIGURATION", press the ENTER key to enter the configuration settings options,
the options include: OSD / TV / SYSTEM SETUP / TIME / PARENTAL LOCK functions.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29

Jay-tech 968R User manual

Category
Portable DVD/Blu-Ray players
Type
User manual

Jay-tech 968R is a portable DVD player with perfect sound and display output, suitable for use in various settings, including offices, indoors, hotels, and cars. It features a built-in battery with a long lifespan, allowing for extended use without the need for an external power source. The player supports a wide range of media formats, including DVDs, CDs, MP3s, JPEGs, and USB drives, providing versatility and entertainment options. Additionally, it has TV functions, enabling users to connect it to a TV for a larger viewing experience.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI