Teka DHA-718 Owner's manual

Page is loading ...

Top cavity

1 Temperature selector.

2 Function selector.

3 Heating indicator light. Indicates that the

heat is going to the food and it goes out

when the set temperature is reached.

Main cavity

4 Electronic clock.

5 Function selector.

6 Temperature selector.

7 Heating indicator light.

8 Fan oven + temperature selector.

Model DHA-718

Model DHA-888

Control Panel

Oven Functions

3 2 1 4 8 7

1 2 3 4 57 6

Model DHA-718

Top cavity: / / / /

Main cavity:

Model DHA-888

Top cavity: / / / /

Main cavity:

////

Switch off oven

Conventional

It is used for sponges and cakes where the

heat received must be uniform to achieve a

spongy texture.

Lower Element

Heats only from beneath. Suitable for heating

dishes and raising pastry and similar.

14

15

ENGLISH

Model DHA-718

Setting the Time on the Clock

On connecting the oven you will notice that

daytime flashes on the display, starting from

0:00 and the auto symbol A flashes.

Press the “+” and “-” buttons simultaneously

and then pressing the “+” or “-” buttons the

correct time can be set on the display.

Manual Use

After setting the correct time, the oven is ready

for use. The symbol is illuminated on the dis-

play. Select a temperature and a cooking func-

tion.

To switch off the oven, set the controls to the

position.

Warning Function

This function generates a buzzer interval alarm

signal at a specified time.

1 Press the MODE button until the symbol

begins to flash.

2 Choose the time when you want the alarm to

sound, pressing the “+” or “-” buttons.

Use of the Oven

MaxiGrill

Allows greater surfaces to be prepared, than

with the grill, together with higher power

reducing the time required for browning of the

food.

Grill

For preparing dishes with superficial roasting.

It allows the outer layer to be browned without

affecting the inside of the food. Ideal for flat

food, such as steaks, ribs, fish, toast.

MaxiGrill with fan

Allows uniform roasting at the same time as

surface browning. Ideal for grills. Special for

large volume pieces, such as poultry game

etc. It is recommended to put the item on a

rack with a tray beneath to collect the stock

and juices.

Caution

While using the Grill, MaxiGrill or MaxiGrill with

fan, the door must be kept closed.

Turbo

The fan distributes the heat produced by an

element located at the rear of the oven. Due

to the uniform heat distribution, it allows

roasting and baking to take place on two

levels at the same time.

Defrosting

This cooking mode is suitable for gentle

defrosting of delicate food to be consumed

unheated, e.g.: cream, custard, pastry, tarts,

cakes, fruit,...

Note

The pilot light remains on in any cooking

function.

3 Subsequently, the symbol will remain on

indicating that the alarm is programmed.

4 At the end of the programmed time, an

acoustic interval signal will sound and

the symbol will begin to flash.

5 Press any button to turn off the acoustic

signal.

The buzzer signal frequency can be changed by

MINUS in 3 circular steps. For listening to the

actual valid signal, press “-” button for some

seconds while the display reads the time of

the day. Every new key press within the time

window changes the buzzer signal. Now this

tone is valid as program end alarm signal.

Programming the Cooking Time

This function allows to programme the oven to

cook for a specified time, after which it will

switch itself off.

1 Press the MODE button until the display

automatically switches over between “dur”

display and duration time setting mode. The

symbol A is flashing.

16

2 Select the duration, pressing the “+” or “-”

buttons.

3 Subsequently, the symbol A that was

flashing will light, indicating that the oven

will switch itself off automatically.

4 The display will then show the current time.

5 Select a temperature and cooking function.

6 When the set time has elapsed the oven will

disconnect, the symbol will switch off, an

acoustic interval signal will sound and the

symbol A will begin to flash.

7 Press any button to switch off the acoustic

signal, reconnecting the oven.

8 Set the controls in the position to switch

off the oven.

Programming the End of Cooking Time for the

Oven

This function allows to establish the exact

hour, after which the oven will switch itself off.

1 Press the MODE button until the display

automatically switches over between “End”

display and end time setting mode. The

symbol A is flashing.

2 Select the time that cooking is to finish,

pressing the “+” or “-” buttons.

3 Subsequently, the symbol A that was

flashing will light, indicating that the oven

will switch itself off automatically.

4 The display will then show the current time.

5 Select a temperature and cooking function.

6 When the programmed time is reached the

oven will disconnect, the symbol will

switch off, an acoustic interval signal will

sound and the symbol A will begin to flash.

7 Press any button to switch off the acoustic

signal and the oven will reconnect.

8 Set the controls to the position to switch

off the oven.

This function may be used even though you are

already cooking in your oven. To do so, follow

the instructions given except Nº 5.

Programming the Duration and Automatic Stop

This function is used to control the duration

and the time at which the oven will turn itself

off. This function allows the oven to start and

stop automatically.

1 Press the MODE button until the display

automatically switches over between “dur”

display and duration time setting mode.

The symbol A is flashing.

2 Select the duration, pressing the “+” or “-”

buttons.

3 Subsequently, the symbol A that was

flashing will light, indicating that the oven

will switch itself off automatically.

4 Press the MODE button until the display

automatically switches over between “End”

display and end time setting mode. The

symbol A is flashing.

5 Select the time that cooking is to finish,

pressing the “+” or “-” buttons.

6 Subsequently, the symbol A that was

flashing will light, the symbol will switch

off and the oven will remain disconnected.

Your oven is programmed.

7 Select a function and cooking temperature.

8 When the time to begin cooking is reached,

the oven will switch itself on and will continue

cooking during the programmed time.

9 When the programmed finishing time is

reached, the oven will disconnect, an

acoustic interval signal will sound and the

symbol A will begin to flash.

10

Press any button to switch off the acoustic

signal and the oven will reconnect.

11

Set the controls to the position to switch

of the oven.

Caution

Pressing the MODE button the display on the

screen shows any function programmed. It can

be changed by pressing the “+” or “-“ buttons.

Program times for automatic programs can be

cleared by pressing “+” and “-” simultaneous-

ly. For clearing warning function, first you must

be select the warning function in the display.

mode

17

ENGLISH

Model DHA-888

Setting the Time on the Electronic Clock

When the oven is connected to the power supply,

the indication 00:00 flash on the display. Press

or to set the time on the clock. The clock

beeps twice to confirm the selected time.

If you wish to modify the time, press or

until the current time flash on the screen.

Press . Then press or to modify

the time. The clock beeps twice to confirm the

modification.

Manual Operation

The oven is ready to be used when the clock

has been set. Select a cooking function and a

temperature.

Set the controls to to turn the oven off.

Functions of the Electronic Clock

Alarm: Creates an alarm signal when the peri-

od of time finishes; the oven does not need to

be in use in order to use this function.

Cooking Time: To cook for a selected length of

time; the oven turns itself off automatically

when the time finishes.

End Cooking Time: To cook until a set time;

the oven turns itself off automatically when

the time finishes.

Cooking time and End Cooking Time: To cook

for a selected length of time and end at a set

time. When this function is set, the oven

comes on automatically at the time required in

order to cook for the set length of time

(Cooking time) and end automatically at the

indicated time (End Cooking Time)

Programming the Alarm

1 Press until symbol lights up. Press

.

2 Set the period of time after which you wish

the alarm to sound by pressing or .

3 The clock beeps twice, the current time is

displayed and symbol lights up perma-

nently to indicate that the alarm has been

set.

4 When the set period of time comes to an

end, the alarm sounds and symbol

starts to flash.

5 Press any button to stop the alarm; symbol

goes out.

You can consult the remaining time at any

moment by pressing or until symbol

flashes and then pressing . You can

also modify the set time at this point by press-

ing or . The clock beeps twice to con-

firm the change.

If you wish the remaining time to be displayed

until the end of the set period of time, press

or until symbol flashes and then

press and keep it pressed in. Symbol

flashes. Keep pressed in again to

return to the real time.

Setting the Cooking Time

1 Press or until symbol lights up.

Press .

2 Select the period of time you wish to cook

for by pressing or .

3 The clock beeps twice, the current time is

displayed and symbol lights up perma-

nently to indicate that the oven will turn

itself off automatically.

4 Select a cooking function and temperature.

5 When the cooking time comes to an end, the

oven turns itself off, the alarm sounds and

symbol flashes.

6 Press any button to stop the alarm and turn

the oven back on again.

7 Set the controls to to turn the oven off.

You can consult the remaining cooking time at

any moment by pressing or until sym-

bol flashes and then pressing . You

can also modify the set time at this point by

18

pressing or . The clock beeps twice to

confirm the change.

If you wish the remaining time to be displayed

until the end of the set period of time, press

or until symbol flashes and then

press OK and keep it pressed in. Symbol

flashes. Keep pressed in again to return

to the real time.

Setting the End Cooking Time

1 Press or until symbol lights up.

Press .

2 Select the time you wish the cooking

process to finish at by pressing or .

3 The clock beeps twice, the current time is

displayed and symbol lights up perma-

nently to indicate that the oven will turn

itself off automatically.

4 Select a cooking function and temperature.

5 When the set time is reached, the oven

turns itself off, the alarm sounds and sym-

bol flashes.

6 Press any button to stop the alarm and turn

the oven back on again.

7 Set the controls to to turn the oven off.

You can consult the end cooking time at any

moment by pressing or until symbol

flashes and then pressing . You can

also modify the end cooking time at this point

by pressing or . The clock beeps twice

to confirm the change.

This function can be used even when you are

already using the oven. To do this, follow the

instructions indicated above except point

number 4.

Setting the Cooking Time and the End

Cooking Time

1 Press or until symbol lights

up. Press .

2 Select the period of time you wish to cook

for by pressing or .

3 The clock beeps twice, the current time is

displayed and symbol lights up per-

manently.

4 Press or until symbol lights

up. Press .

5 Select the time you wish the cooking

process to finish at by pressing or .

6 The clock beeps twice, the current time is

displayed and symbol lights up per-

manently.

7 Select a cooking function and temperature.

8 The oven remains off with symbols

and lit up. Your oven is set.

9 When the time to start cooking is reached,

the oven starts up and cooks for the set

period of time.

10 When the set end cooking time is reached,

the oven turns itself off, the alarm sounds

and symbols and flash.

11 Press any button to stop the alarm and

turn the oven back on again.

12 Set the controls to to turn the oven off.

You can modify the end cooking time by press-

ing or until symbol lights up and

then pressing . You can now modify the

end cooking time by pressing or . The

clock beeps twice to confirm the change.

Important

In the event of a power cut, all the electronic

clock settings are deleted and the indication

00:00 flashes on the display. It is necessary to

set the time and programme the clock again.

19

ENGLISH

Tray Handle

The tray handle is used when you need to remove the tray to check the food. See figures. To lift

the tray out of the oven, you need to use gloves to protect yourself.

Cake tray handle position. You must put the

short hook over the tray.

Short hook

Long hook

Roasting tray handle position. You must put

the long hook over the tray.

Page is loading ...

32

Tray Handle

The tray handle is used when you need to move the tray to check the cook. See figures. To handle

the tray out the oven, you need to use gloves to protect yourselve.

Cake tray handle position. You must put the

short hook over the tray.

Short hook

Long hook

Roasting tray handle position. You must put

the long hook over the tray.

Page is loading ...

Nuestra aportación a la protección del medio-ambiente: utilizamos papel reciclado.

A nossa contribução para a protecção do ambiente: utilizamos papel reciclado.

Our contribution to enviromental protection: we use recycled paper.

Notre contribution à la protection de l’environnement : nous utilisons du papier recyclé.

Unser Beitrag zum Umweltschutz: wir verwenden umweltfreundliches Papier.

Cod.: 83172142/3172142-001

Teka industrial, S.A.

C/ Cajo, 17

39011 Santander (Spain)

Tel.: 34 - 942 - 35 50 50

Fax: 34 - 942 - 34 76 94

http://www.teka.es

Teka Küchentechnik GmbH

Sechsheldener Str. 122

35708 Haiger (Germany)

Tel.: 49 - 2771 - 8141-0

Fax: 49 - 2771 - 8141-10

http://www.teka.com

KÜCHENTECHNIK

TEKA GROUP

COUNTRY CITY COMPANY CC PHONE FAX

Australia Victoria TEKA AUSTRALIA Pty. Ltd. 61 3 9550 6100 3 9550 6150

Austria Wien KÜPPERSBUSCH GesmbH 43 1 866 800 1 866 8082

Belgium Zellik B.V.B.A. KÜPPERSBUSCH S.P.R.L. 32 2 466 8740 2 466 7687

Bulgaria Sofia TEKA BULGARIA EOOD. 359 2 9768 330 2 9768 332

Chile Santiago de Chile TEKA CHILE, S.A. 56 2 4386 000 2 4386 097

China (Pop. Rep.) Shanghai TEKA INTERNATIONAL

TRADING (Shanghai) 86 21 511 688 41 21 511 688 44

Czech Republic Liben TEKA CZ S.R.O. 420 2 84 691940 2 84 691923

Ecuador Guayaquil TEKA ECUADOR, S.A. 593 4 2251174 342 250 693

France Cergy Pontoise TEKA FRANCE S.A.S. 33 1 343 01597 1 343 01598

Germany Haiger TEKA KÜCHENTECHNIK GmbH 49 27718141-0 771 814 110

Greece Athens TEKA HELLAS A.E. 30 210 9760283 210 9712725

Hungary Budapest TEKA HUNGARY KFT 36 1 3542110 1 3542115

Indonesia Jakarta PT TEKA BUANA 62 21 390 5274 21 390 5279

Italy Frosinone TEKA ITALIA S.P.A. 39 0775 898271 0775 294681

Korea (Rep. South) Seoul TEKA KOREA CO. LTD. 82 2 599 4444 222 345 668

Malaysia Selangor Darul Ehsan TEKA KÜCHENTECHNI

(MALAYSIA) SDN. 60 3 7620 1600 3 7620 1626

Mexico Mexico D.F. TEKA MEXICANA S.A. de C.V. 52 555 133 0493 55 5762 0517

Pakistan Lahore KÜPPERSBUSCH-

TEKA PAKISTAN Pvt. Ltd. 92 42 631 2182 42 631 2183

Poland Pruszków TEKA POLSKA SP. ZO.O. 48 22 7383270 22 7383278

Portugal Ílhavo TEKA PORTUGAL, S.A. 351 234 329 500 234 325 457

Russia Moscow TEKA RUS LLC 7 095 737 4690 095 737 4689

Singapore Singapore TEKA SINGAPORE PTE. LTD. 65 67342415 67346881

Spain Santander TEKA INDUSTRIAL, S.A. 34 942 355050 942 324499

Thailand Bangkok TEKA (THAILAND) CO. LTD. 66 2 6933237 2 6933242

Turkey Istanbul TEKA TEKNIK MUTFAK 90 212 288 3134 212 274 56 86

Ukraine Kiev TEKA UA 380 44 272 33 90 44 279 58 54

United Arab Emirates

Dubai TEKA KÜCHENTECHNIK

MIDDLE EAST FZE 971 4 887 2912 4 887 2913

United Kingdom Milton Abingdon TEKA PRODUCTS LTD. 44 1235 861916 1235 835107

USA Tampa TEKA USA, INC. 1 813 2888820 813 2888604

Venezuela Caracas TEKA ANDINA, S.A. 58 2 1229 12821 2 1229 12825

^

Teka DHA-718 Owner's manual

This manual is also suitable for

Teka DHA-718 Owner's manual

in other languages

Related papers

Other documents