Model: D1001
WELCOME !
Dear customer,
Thank you for you purchasing the EONON D1001 In-Car DVD/MP3/CD player with AM/FM
radio and USB/SD/MMC memroy card interface and front panel A/V Auxiliary input.
It has been designed, engineered and manufactured to bring you the highest level of
performance and quality, and will give you years of listening pleasure.
WARNING !
When Driving
• Do not watch the video program or operate this car DVD player while driving.
• Keep the volume level Iow enough to be aware of the road and traffic conditions.
When Washing your Vehicle
• Do not expose the product to water or excessive moisture. Moisture can cause electrical
shorts, fire or other damage.
When Parked
• Parking in direct sunlight can produce very high temperatures inside your vehicle. Give the
interior a chance to cool down before starting playback.
Use the Proper Power Supply
• This product is designed to operate with a 12 volt DC negative ground battery system.
Protect the Disc Mechanism
• Avoid inserting any foreign objects into the disc slot. Misuse may cause malfunction or
permanent damage due to the precise mechanism of this unit.
THIS DEVICE IS A CLASS 1 LASER PRODUCT.
The device has a safety system that prevents dangerous laser rays from escaping from the
device during normal use. In order to avoid injury to the eyes, never interfere with or damage
the unit's security system.
The invisible laser beam which could cause hazardous radiation if open or the
interlocks defeated. Do not open covers and do not repair by yourself to avoid
exposure to beam directly.
CLASS 1 LASER
PRODUCT
All packaging and packaging materials that are no longer required should be
recycled.
At the end of its life, you should need to dispose of this product, please note that
the waste electrical product should not be disposed of with household waste.
Check with your local authority or retailer for recycling advice.
01
Content
Content...........................................................................0 1
Precautions.....................................................................02
Installation.................................................................03-05
Removing,keeping and install the detachable front panel.....05
Location and function of keys............................................06
Location and function of the remote control.........................07
General operations......................................................08-12
Radio operations.........................................................12-14
RDS (Radio data system) operations.............................14-15
Media playing basic operations.....................................16-17
Media playing advanced operations..............................17-20
Data disc playing operations...........................................21
USB operations................................................................21
SD/MMC operations........................................................22
External AUX AV input device operations............................22
Setup.........................................................................23-27
System setup.....................................................23-24
Language setup.....................................................25
Audio setup............................................................25
Speaker setup...................................................25-26
Digital setup...........................................................27
Basic concepts on DVD player......................................28-29
Truoubleshooting.............................................................30
Electrical connections......................................................31
Specifications..................................................................32
02
Precautions
Head unit
a. To protect traffic safety and to avoid violations of traffic laws, do not watch a video program
or operate the unit in the vehicle driving.
b. In order to ensure safety and normal using, please make the professional to
install this product, do not unauthorized disassembly or repair of the unit avoid damage and
accidents.
c
d This LCD display uses exact electronic structure, do not beat LCD display strong, so as to
avoid damage the product.
e Do not
f
h Do not plug the map card, wiring harness accessories when the unit is powered on, to
avoid damage to the unit or attachment.
We suggest you do not increase the volume of this unit too high, because listening to high
sound over time, it will affect the health of your ears and hearing. At the same time, when you
are driving, if the volume is too high in car can cause you don't hear other vehicles whistle
sound, and other security tips, which affects the safety of drive .
j For using this product safely and correctly, please
a Use 12-cm CDs. Use only conventional, fully circular discs. Do not use shaped discs.
b
d
e
3.
4.
technician
. Do not place this product in a wet environment and water to prevent an electrical shock by
electric shock, damage and fire.
.
. insert any other objects into the disc loader like a coin or pin, etc as this may cause
damage or a short circuit.
. Do not clean the unit with alcohol, only clean with a soft dry cloth; before clean, please turn
off the power supply.
g. Do not expose the unit in direct sunlight for a long time
. un or
i.
. read th manual before using
pecifications and design are
subject to change for further improvement without notice.
Disc
.
. Do not use the dirt, dust, scratches and warping discs in this unit.
c. Do not place stickers or make scratches on discs.
. Do not warp discs.
. A disc should always be kept in its case when not in use to prevent from damage.
f. Do not place discs in the following places:
1. Direct sunlight.
2. Dirty, dusty and damp areas.
Near car heating pipe etc.heat sources.
On the seats or dash board.
Clean
Use a dry soft cloth to wipe the surface, if the
disc is quite dirty.
Use a soft cloth slightly moistures with isopropyl
(rubbing) alcohol.
Never use solvents such as benzene, thinner or
conventional record cleaners as they may
mar the surface of the disc.
To remove the rough spots on the edges of a new disc
A new disc may have irregularities. It will sometimes be
necessary to remove these rough edges in advance by using
a ballpoint pen or pencil as shown in the illustration.
e carefully
and keep the manual for reference in future.
For we follows a principle of constant improvement, the s
Label side up Do not touch the underside of disc
Wipe the disc from the center toward the outside edge
Rough spots on outside edge
Ball point pen
or pencil
Rough spots on inside edge
Safety precautions:
a. Before installing the unit, disconnect the cable attached to the vehicle battery's negative
(-) terminal. Remove the two screws at the top of the head unit (as shown as the below fig.).
b. Choose the mounting location where the unit will not interfere with the normal drive of the
driver. Install the unit where it does not get in the driver's visual line and it will not get in the
driver's way and cannot injure the passenger if there is a sudden or emergency stop.
Avoid installing the unit where it would be subject to high temperature, such as from direct
sunlight, or from hot air, from the heater, or where it would be subject to dust, dirt or excessive
vibration.
c. The unit may not work properly if is installed at an angle of more than 30° from horizontal.
d. Only use the parts provided with the unit to install it to ensure proper installation.
The unauthorized parts may cause malfunctions.
e. Consult with your nearest dealer if installation requires the drilling of holes or other
modifications of the vehicle.
f. Before finally installing the unit, test the connection and make sure it is all connected up
properly and make the unit is working properly.
DIN Front-Mount / Rear-Mount:
This unit can be properly installed either from 'Front' (conventional DIN Front-mount) or
'Rear' (DIN Rear-mount installation, utilizing threaded screw Holes at the sides of the unit
chassis). For details, refer to the following illustrated installation methods.
1. DIN FRONT-MOUNT (Method A)
This unit can be installed in any dashboard opening with the
following dimensions (DIN standard):
Before installing the unit, test all of the connections and make sure that the unit is working
properly, then follow these steps to install the unit
1 Make sure the ignition is turned off. Disconnect the cable attached to the vehicle battery's
negative (-) terminal.
2. Disconnect the wire harness and the antenna.
3. Press the button to fold down the front panel, then remove the front panel.
4. Lift the top of the outer trim ring, then pull it out to remove it.
5. Use the two supplied release keys supplied to
remove the unit from the mounting bracket.
Insert the left (“L”) and right (“R”) release keys
as far as they will go (with the notches facing
up) into the appropriate slots at the center of
the left and right sides of the unit.
Then slide the unit out of the mounting bracket.
:
.
Installation
03
182 mm
53 mm
Sleeve
Key(L)
Key(R)
Outer trim ring
Front panel
Notch up
6.Fit the mounting bracket by inserting it into the dashboard opening and bend out the tabs
located around the bracket with a screwdriver. Not all tabs will be able to make contact, so
choose the ones which will be most effective with the dashboard.
04
7. Reconnect the wire harness and the antenna, being careful not to pinch any wires or cables.
8. Slide the unit into the sleeve until it locks into place.
9. To further secure the unit, use the supplied metal strap to attach the back of the car radio.
Use the supplied Hex Nut (M5mm) and Spring Washer to attach one end of the strap to the
mounting bolt(M5x 29.3mm) on the back of the unit.
If necessary, bend the metal strap to fit your vehicle's mounting area.
Then use the supplied Tapping Screw (5x25mm) and Plain Washer to attach the other end of
metal strap to a solid metal part of the vehicle under the dashboard.
Note: To install the short threading terminal of the mounting bolt to the back of the unit and the
other long threading terminal to the dashboard.
10.Reconnect the cable to the vehicle battery's negative (-) terminal.
Then replace the outer trim ring and install the unit's front panel.
Removing the unit
1. Make sure the ignition is turned off, and then disconnect the cable attached to the vehicle
battery's negative (-) terminal.
2. Disconnect the wire harness and the antenna,
3. Press the button to fold down the front panel, then remove the front panel.
4. Lift the top of the outer trim ring then pull it out to remove it.
5. Use the two supplied release keys supplied to remove the unit from the mounting bracket.
Insert the left (“L”) and right (“R”) release keys as far as they will go (with the notches facing
up) into the appropriate slots at the center of the left and right sides of the unit.
Then slide the unit out of the mounting bracket.
Sleeve
Tabs
Screwdriver
Dashboard
Mounting bolt
Hex Nut
Spring Washer
Metal strap
Plain Washer
Tapping Screw
2. DIN REAR-MOUNT (Method B)
If your vehicle is a Nissan, Toyota, please follow this mounting instruction to instal it.
If your vehicle is the TOYOTA, please install with the screw holes marked T both sides of the
unit; If your vehicle is the NISSAN, please install with the screw holes marked N both sides
of the unit.
Fixed the unit on the mounting brackets with screws. Align the screw holes on the mounting
bracket with the head unit, then tighten the screws on both sides.
(Note: We will not supply the bracket, if necessary, you can choose to use the original
vehicle mounting bracket, or buy it from the dealer.)
05
5mm MAX
N
TN
T
5mm MAX
N/T
NT
T N
NT
1
2
2
1
Front panel
Front panel
Right hand side of the head unit
Left hand side of the head unit
Choose proper screw holes marked T or N both side of the unit.
Mounting bracket
Screw
Screw
Dashboard or Console
Note:
The outer trim ring, mounting sleeve and the metal strap are not used for installation method
B.
Removing, keeping and install the detachable front panel
Removing the detachable front panel from the head unit
1. Press the OPEN button to flip down
the front panel.
2. Grasp the right side of the front
panel, then gently push the front panel
towards the left side before pulling it out
from the unit.
3.Store the front panel in the protective case provided for safe keeping,
front panel time.if the is not to be used for long
Protective case
Open button
TO ATTACH THE FRONT PANEL
Hold the right side of the front panel with the plate facing down.
First attach the left side of the front panel to the unit by inserting
the hole into the left holder.
Then slightly push it leftwards and attach the right side hole into
the right holder. Finally push up the front panel.
06
24
22
27
25
26
1 2 3
9
10
16 17
5
8
6
11
12
13
18 19
47
15
14 20 21
23
Location and function of keys
When you press the button and the front panel is removed:
Descriptions of Function Controls
(1) Power on/off ( ) Button, MUTE Button
(2) Volume Increase( )/ Decrease( ) Button
(3) BAND(BND) Button, MODE(MOD) Button
(4) DISP Button (System Information Display),
EQ Button
(5) LCD Display
(6) USB port
(7) Open ( ) Button
(8) Preset Station 1, (Play/Pause) Button
(9) Preset Station 2, INT (Intro Scan) Button
(10) Preset Station 3,RPT (Repeat) Button
(11) Preset Station 4, RDM (Random) Button
(12) Preset Station 5, STOP Button
(13) Preset Station 6, GOTO Button
(14) AS/PS (Automatic Search & Preset memory Scan) Button
(15) Button: Tune down, Seek down,
previous track, fast reverse
(16) MENU Button
(17) Button: Tune up, Seek up,
next track, fast forward
(18) IR Remote Control Sensor
(19) PTY(Program Type) Button,
REG(Regional Program) Button
(20) AF(List of Alternative Frequencies),
TA(Traffic Announcement) Button
(21) AUX (Audio/Video auxiliary Input) Jack
(22) SD/MMC Memory Card Slot
(23) Disc slot
(24) Eject Disc ( ) key
(25) Anti-theft LED Indicator
(26) RESET Button
(24) Disc slot Indicator
PTY
MUTE
GOTO
STOP
6
DISP
AF
EQ
TA
1
RDM
VOL
VOL
2
INT
5
4
REG
AUX
D1001
CAR PL AYER 65Wx 4
12
18
14
1
2
3
15
17
27
5
16
4
6
7
8
9
10
11
13
19
20
21
22
23
24
25
26
30
29
28
AF/REG
TA PTY
A
B
07
(1) Power on/off ( ) Button
(2) DISP Button (System Information Display)
(3) A-B Button (Paragraph Repeat)
(4) RPT (Repeat playback) Button
(5) ZOOM(Zoom in /Zoom out) Button
(6) Cursor Buttons ( )
(7) ENTER Button
(8) SETUP Button
(9) Tune down, Seek down, prevous track Button
(10) Tune up, Seek up, next track Button
(11) TITLE( DVD Title Menu) / PBC(Playback Control) Button
(12) (Play/Pause) Button
(13) Preset Station 1~6 Button, Numeric 1~6 Button
(14) TA (Traffic Announcement) Button, Numeric 7 Button
(15) AF(List of Alternative Frequencies) Button,
REG(Regional Program) Button, Numeric 8 Button
(16) Source selector (MODE) Button
(17) AUDIO(Audio language/channel Select) Button
(18) SUB-T(Subtitle Language select/
Playback information select) Button,
(19) MUTE Button
(20) ANGLE(Camera angle selection for some disc) Button
(21) Volume Increase(VOL+)/Decrease(VOL-) Button
(22) MENU Button
(23) Fast Forward Button ( )
(24) Fast Reverse Button ( )
(25) GOTO Button[Search title/chapter/track (VCD/CD)/time],
AS/PS (Automatic Search & Preset memory Scan) Button
(26) Stop Playback Button ( )
(27) PROG(Programmed play mode) , LOC/DX Button
(28) RDM(Random playback) Button, MO/ST Button
(29) Numeric 0 Button, BAND Button
(30) PTY(Program Type) Button, Numeric 9 Button
◄/►,▲/▼
Remark:
♦ Remove the insulating tape before using for the first time.
♦ Point the remote control at the remote sensor within 2 meters.
♦ It may not be possible to operate the remote control if the remote control sensor is
exposed to direct sunlight.
♦ Operation angle: about ±30°in each the direction of the front of the remote sensor.
♦ The remote control is a small, lightweight precision device. To avoid damage, short
battery life, operational errors and poor response.
Please take note of the following points for the remote control:
- Do not subject the remote control to excessive shock.
- Do not put in a trouser pocket.
- Keep away from food, moisture and dirt.
- Do not place in direct sunshine.
Battery replacement
Battery type: a button cell lithium battery (CR2025 3V)
1. Remove the battery holder by pressing the locking
tab with your thumb and pulling it out.
2. Replace the battery with the same type and the (+)
side facing up.
3. Closing the cover : Gently push in the holder until
securely locked into place.
Location and function of the remote control
Reset function
1. all the properly please press
the RESET button (you can see it after remove the front panel) to
Once the system of the unit halts, error display, function buttons do not work, press the
RESET button with either a ballpoint pen or thin metal object to
System menu settings
- During FM radio mode, briefly press the MENU button on the head unit or remote control to
access the system menu setting mode. Briefly press the or button on the head unit or
remote control, you can access the following sub-menus:
“RDS”->””RADIO”->“AUDIO”->“SYSTEM”
- During the disc, SD card, USB playing mode or external auido/video auxiliary input mode,
you can access the following sub-menus by pressing the or button:
“AUDIO”->“SYSTEM”
After selecting any one of above menus, briefly press the MENU button again to access the
selected menu. If you want to exit the current menu and return the upper menu, press the
AS/PS button on the head unit or remote control.
Operating the unit the first time, after connect wire harness ,
restore the unit to the
factory settings.
2.
restore the unit to the original
factory settings.
Turning the unit on and off
In power off mode, switch on the unit by pressing any button on the head unit (except the
OPEN button and the EJECT button) or on the remote control. If you insert a disc to disc slot,
you can also switch on the unit. When the system is on, press and hold the power on /off
button ( ) on the head unit, or briefly press the power on/off button ( ) to turn off the unit.
Adjusting the Volume Level
Briefly press the VOL / VOL button on the head unit or briefly press the VOL+/- button
the remote control to adjust the volume level of this unit.
Mute on/off
When the unit is switched on, briefly press the MUTE button to toggle mute on or off.
08
TA SEEK/TA ALARM
PI MUTE/PI SOUND
TA VOL (TA Volume preset): The adjustable range is 00 ~ 50
RETUNE L(Long, 60 seconds)/RETUNE S(Short, 40 seconds)
STEREO/MONO
DX/LOC
VOL(volume): from 00~50
BAL(balance): 08L~01L, L(Left)=R(Right), 01R~08RThe adjustable range is
BAS(bass)/MID(middle)/TRE(treble): -10~-1, 00, +1~+10The adjustable range is
FAD(fader): 08F~01F, F(Front)=R(Rear), 01R~08RThe adjustable range is
CET(center): ON/OFF
CET(center): -8~-1, 0, +1~+8The adjustable range is
SUB(subwoofer): ON/OFF
SUB(subwoofer): -8~-1, 0,+1~+8The adjustable range is
DSP(Digital signal processing): DSP OFF/FLAT/POP/ROCK/CLASS
VOL(volume) LAST / ADJ(Switches on at the last switched off volume level / at customized volume level)
LOUD(loudness): OFF/ON
V-ADJ(customized volume adjust): 00~50The adjustable range is
24 HOURS/12 HOURS
XX:XX (hour : minute, )To adjust hours by using the VOL ; To adjust minutes by using the VOL .
MENU
RADIO
RDS
AUDIO
SYSTEM ( You can select 12/24 hour display format according to your need.)
REG ON/REG OFF
BEEP tone(Prompt voice of the push button): ON/OFF
SPK(speaker output): ON/OFF
MIX CH(4.1 channel)/ 5.1 CH (It only for recorded 5.1 channel DVD disc / MPEG4 file)
General operations
The structure of system menu:
09
TA SEEK/TA ALARM
rompt sound.
PI MUTE / PI SOUND
In some regions, there is a possibility of having two different stations with the same frequency
but different PI codes.
TA VOL
STEREO/MONO
FM station is received in stereo mode. However,
Briefly press the VOL / VOL button on the head unit or briefly press the VOL+/- button
the remote control to select TA SEEK or TA ALARM.
- TA SEEK:
When you enabled the TA search function of tuner, if you want to seek the next traffic station
automatically, please select TA SEEK.
- TA ALARM:
After selecting TA ALARM, when you enabled the TA search function of tuner, this unit will not
seek the next traffic station automatically any more. You can hear five beep p
Briefly press the VOL / VOL button on the head unit or briefly press the VOL+/- button
the remote control to select PI MUTE or PI SOUND.
- PI MUTE:
When you select PI MUTE, the unit will not broadcast the new station that is received.
- PI SOUND:
When you select PI SOUND, the unit will switch to the new station with a different PI for a few
seconds, then switch back to the current station that was broadcast initially.
This function allows you to define the minimum volume level of the traffic announcements
that can be adjusted. The adjustable range is 00~50.
Briefly press the VOL / VOL button on the head unit or briefly press the VOL+/- button
the remote control to choose a value of TA volume.
RETUNE L/S:
This function allows you to set the initial time of retune.
When the initial time(Long or short) of automatic TA search or PI search modes is selected.
This unit will automatically search for TA or new station having different PI at the same
frequcncies according to your set initial time.
Briefly press the VOL / VOL button on the head unit or briefly press the VOL+/- button
the remote control to select RETUNE L or RETUNE.
- RETUNE Long mode: Automatic retune takes place after 60 seconds.
- RETUNE Short mode: Automatic retune takes place after 40 seconds.
REG ON / REG OFF
When some broadcasting stations makes up the network, a regional broadcasting program of
radio station may be listened to in other regions. Regional tracking mode allows you to always
listen to the same program. But, the network cover bad or the fluctuation terrain can cause
the transmitting interference. The radio always searches the broadcasting station that have
the best audio reception effects.
Briefly press the VOL / VOL button on the head unit or briefly press the VOL+/- button
the remote control to select REG ON or REG OFF.
- When region is on, the current listening program remains unchanged.
- When region is off, it allows the reception moved to the regional station.
If signal reception is weak or the reception is
not as good as you would like, switching to mono reception mode improves the overall sound
quality.
Briefly press the VOL / VOL button on the head unit or briefly press the VOL+/- button
the remote control to select FM stereo or mono reception.
10
DX/LOC
In urban settings, the signal of most local stations are strong enough and it should be set in
LOCAL mode. For distant stations, you should switch to DX (distant) mode to search for
stations with weaker signals.
Briefly press the VOL / VOL button on the head unit or briefly press the VOL+/- button
the remote control to select local or distant stations.
AUDIO SETUP
- Adjusting the Volume / Bass / Middle / Treble
Briefly press the VOL / VOL button on the head unit or briefly press the VOL+/- button
the remote control to adjust the Volume / Bass / Middle / Treble of this unit.
- Adjusting the Balance / Fader
Briefly press the VOL / VOL button on the head unit or briefly press the VOL+/- button
the remote control to adjust the balance of the left and right / front and rear channel outputs.
- Turning
Briefly press the VOL / VOL button on the head unit or briefly press the VOL+/- button
the remote control to turn on or off the center output.
After tuning on the center output, briefly press the VOL / VOL button on the head unit or
briefly press the VOL+/- button the remote control to adjust the center.
- Turning subwoofer
Briefly press the VOL / VOL button on the head unit or briefly press the VOL+/- button
the remote control to turn on or off the subwoofer output.
After tuning on the center output, briefly press the VOL / VOL button on the head unit or
briefly press the VOL+/- button the remote control to adjust the subwoofer.
PRESETTING EQ
Briefly press the VOL / VOL button on the head unit or briefly press the VOL+/- button
the remote control to choose a music type
Briefly press the VOL / VOL button on the head unit or briefly press the VOL+/- button
the remote control to turn on or off the loudness. During turn on the loudness, the system can
increase the volume level automatically when the voluem is low.
VOL LAST / ADJ
Briefly press the VOL / VOL button on the head unit or briefly press the VOL+/- button
the remote control to choose VOL LAST or VOL ADJ.
- VOL LAST: This unit switches on at the last volume level when it was last switched off.
- VOL ADJ: This function allows you to set the switch-on volume level, regardless of what
level the volume was set at when the unit was switched off.
To set the switch on volume to a certain level:
If you select VOL ADJ, then the unit will access the customized volume level setting mode.
Briefly press the VOL / VOL button on the head unit or briefly press the VOL+/- button
the remote control to adjsut the switch on volume to a certain level.
24 HOURS / 12 HOURS FORMAT
Briefly press the VOL / VOL button on the head unit or briefly press the VOL+/- button
the remote control to choose 24 hour or 12 hour display format.
CLOCK SETTING
Briefly press the VOL ( VOL - button on the remte control) button on the head unit to adjust
center on/off and adjusting the center
on/off and adjusting the subwoofer
(Equalizer)
DSP OFF, FLAT, POP, ROCK, CLASS.
LOUD ON / OFF
You can select 24 hours or 12 hours display format according to your need.
11
hour; briefly press the VOL ( VOL + button on the remte control)button on the head unit to
adjust minute.
BEEP ON / OFF
Briefly press the VOL / VOL button on the head unit or briefly press the VOL+/- button
the remote control to turn on or off the beep tone (prompt voice of the push button).
- Beep on mode: The beep sound can be heard when any function button was pressed.
- Beep off mode: The beep sound can not be heard when any function button was pressed.
SPEAKE OUTPUT ON / OFF
This unit have 5.1 channel output feature, you can select 5.1 channel RCA output audio, you
can also select speaker output audio by connecting speakers directly.
But the direct use speaker way to output audio, the audio will be not 5.1 channel effect.
- If you want to select 5.1 channel RCA output audio, you should select turn off the speaker
output.
- If you want to select speaker output audio, you should select turn on the speaker output.
Briefly press the VOL / VOL button on the head unit or briefly press the VOL+/- button
the remote control to turn on or off the speaker output.
MIX CH(4.1 CH) / 5.1 CH ( )
Briefly press the VOL / VOL button on the head unit or briefly press the VOL+/- button
the remote control to choose MIX CH audio output or 5.1 CH audio output according to your
need.
PRESETTING EQ
It only for recorded 5.1 channel DVD disc / MPEG4 file
-> ->
(Equalizer)
The car audio device is equipped with 4 preset equalization modes.
DSP OFF, FLAT, POP, ROCK, CLASS .
To select playback source
Briefly press the BND / MOD button on the head unit or briefly press the MODE button on the
remote control to choose the different sources in turn as follows:
-> TUNER -> DISC(with a disc inside the disc slot) -> USB (with a USB stick inserted)
-> SD/MMC card(with a memory card inserted) -> AUX AV input - > TUNER
ESP Function
This car DVD player has the electronic shockproof feature. So that if the unit skips due to
rough road conditions, the music or video will be uninterrupted. The time of the memorised
content varies depending on the disc type:
DVD : about 5 seonds; CD/VCD : about 10 seconds; MP3/WMA : about 150 seconds
INFORMATION DISPLAY
Briefly press DISP/EQ button on the head unit or briefly press the DISP button remote control
repeatedly to display.
1. During radio mode:
- In case of receiving an RDS station
PS(Name of the station) -> Frequency -> CT -> PTY(Type of program) ->
- In case of receiving a non RDS station
PS (PS NONE) -> Frequency -> CT -> PTY(PTY NONE) ->
2. During DISC/USB/SD/MMC mode:
- In case of receiving an RDS station
Frequency -> CT -> PTY(Type of program) -> Track number / Running time /Track name
- In case of receiving a non RDS station
Frequency CT PTY(PTY NONE) -> Track number / Running time /Track name
Press and hold the DISP/ EQ button on the head unit repeatedly to select the equlizer modes
as follows: (classic)
12
Mute function for car telephone
The audio system automatically mutes whenever a call comes in.
Note: Y
he function will not work if a cable is not connected to the car phone.
1. When a call comes in
When a call is received, “TEL MUTE” is displayed and all the unit functions are temporarily
interrupted.
2. When the call ends
Hang up the phone,the “TEL MUTE” disappears from the display.
The unit returns to the previous state and the volume returns to the previous level.
Last position memory feature
- During disc, USB, SD/MMC card playback, if you turn off the unit and then switch on it, the
unit will resume playing from the point that it was interrupted.
-During disc, USB, SD/MMC card playback, if you switch to other mode, and then return the
previous mode again, the unit will resume playing from the point that it was interrupted.
Disc slot indicator
When the unit is standby, if there is a disc inside the unit, the disc slot indicator will
When the unit is standby
our car telephone must have been connected to the unit by using a suitable cable.
T
twinkle
continually
Anti-theft LED Indicator
, the red LED indicator will twinkle continually when the front panel
is removed.
Radio operations
To enter or exit radio mode
Briefly press the BND / MOD button on the head unit or MODE button on the remote control to
To select a radio band
In radio mode, ress the BND button repeatedly
to select radio broad
casting bands : ->FM 1-> FM 2 -> FM 3 -> .
repeatedly manually search upward
ward step by step for the desired radio station within the current band.
For fast manual tuning mode, press and hold the or button.
select the radio mode.
p and hold / MOD on the head unit , or briefly
press the BAND button on the remote control repeatedly one of the 5 -
one by one MW 1 -> MW 2
Auto tuning
Briefly press the or button on the head unit or remote control, the radio will search
up for a radio station with a strong signal within the current band.
Briefly press the or button again, the seek tuning will stop. a valid radio
station, the radio will stop seeking, simultaneously, play the selected radio program.
Manual tuning
Press and hold the or button on the head unit or remote control, the radio will change
to manual tuning mode.
Now briefly press the or button , the radio will
or down
During manual tuning mode, if neither of the two buttons is used for 5 seconds, the radio will
automatically change to auto tuning mode. The SEARCH
wards or downwards
The message “SEARCH” appears on the LCD display.
When receive
The word “MANU SEEK” appears on the LCD display.
word “ ” appears on the LCD display.
13
To store preset radio stations manually
We advise that you should store the radio frequency that you often want to listen to in the
preset memory bank 1-6. Later, you can quickly find the corresponding radio frequency by
pressing the one of the preset buttons (1-6) on the head unit or remote control.
- During radio mode,select a band, FM 1, FM 2, FM 3 or MW 1, MW 2. (If necessary)
- Select a station by auto / manual tuning.
- Press and hold one of the preset buttons (1-6) to store the current radio frequency in the
corresponding preset memory bank.
E.g.:
You want to store the “97.10 MHz” in the 1 preset memory bank of the FM 1 band.
The operating steps as follows:
1. Select FM 1 by using the BAND button.
2. Select the radio frequency “97.10 MHz” by auto / manual tuning.
3. Press and hold the numbered button 1 on the head unit or remote control.
If a digit 1 shown on the LCD display, means the “97.10 MHz” will be stored in the 1 preset
memory bank of the FM 1 band sucessfully.
Hint:
1. Once you store the preset station, the new preset station will overwrite the previous stored
station.
2. If you wish to store more the preset stations in the FM 2, FM 3 or MW 1, MW 2, you can do it
according to the above steps.
To recall preset radio stations manually
- During radio mode,select a band, FM 1, FM 2, FM 3 or MW 1, MW 2. (If necessary)
- Briefly press one of the preset buttons (1-6) to recall the corresponding stored station.
E.g.:
After selecting FM 1, briefly press the numbered button 1 on the head unit or remote control,
you can recall the frequecny “97.10 MHz” and listen to the program of the station.
Note:
1. You can store up to 30 stations (6 stations per band, 18 FM stations, 12 MW stations) in the
memory.
2. In storing and recalling the radio staion, only the numbered buttons 1-6 on the head unit or
remote control are effective, the numbered buttons on the remote 7,8,9,0 will be unavailable.
To store a preset station automatically
You can store up to 30 stations (6 stations per band, 18 FM stations, 12 MW stations) in the
memory.
Press and hold the AS/PS button on the head unit or remote control, the word “storing” will be
twinkled twice on the LCD display, then the radio will scan from the curretn frequency within
the current band, the scanning and storing of the FM 1, FM 2, FM 3 will be finished at a time;
the scanning and storing of the MW 1, MW 2 will be finished at at time.
The 6 strongest stations into the preset memories. Next time, you want to listen to the radio,
you quickly find the preset station by using the numbered buttons (1 - 6)
Once you store the preset station, the new preset station will overwrite the previous stored
station.
To scanning preset stations automatically
Briefly press the AS/PS button on the head unit or remote control, the radio will scan each
preset stations in the FM 1, FM 2, FM 3 and MW 1, MW 2 one by one. During scanning, each
detect a valid station, the radio will broadcast each preset station for 5 seconds, and then
continue to scan until the finsish a cycle. Now you can inquire the preset station store in which
preset memory bank , then you can quickly find the preset station by using the numbered
buttons (1 - 6)
Note: The above operations about storing or recalling preset stations apply to RDS, too.
.
.
14
STEREO/MONO
FM station is received in stereo mode. However, If signal reception is weak or the reception is
not as good as you would like, switching to mono reception mode improves the overall sound
quality. Press the MO/ST button on the remote control to select FM stereo or mono reception.
Press the LO/DX button on the remote control to select local or
distant stations.
When you want to listen to a local station, please turn on the LOC reception function.
In this mode, you can receive the stations with strong enough and stable signal.
When you want to listen to a distant station, please turn off the LOC reception function to
improve reception effect.
DX/LOC
In urban settings, the signal of most local stations are strong enough and it should be set in
LOCAL mode. For distant stations, you should switch to DX (distant) mode to search for
stations with weaker signals.
RDS (Radio data system) operations
The brief description about RDS radio reception
What is RDS?
RDS is a special radio broadcast, called “Radio Data System”, it is a system for transmission
of additional information with the FM broadcast transmit signal, it can transmit the station
name(PS), program type(PTY), program content and other dagital form additional information
by using the subcarriers.
By the tuner with RDS function can identify these digital signals and change signals into a
character displayed on the LCD display.
The most important feature of RDS is priority set (i.e. AF), you can set your favorite radio
stations, such as sports, news or economic, etc.
When the RDS tuner receive your set station signal, the current program of the unit will stop,
change to broadcast this information. It is in the form of digits and letters shown on the LCD
display, no sound output.
The other function is warning interrupt function (ie TA), when the road conditions and
incidents (such as traffic jams, etc.), radio stations will broadcast signals, the RDS tuner will
receive the information and will be displayed on the LCD display, you can go the other way.
In many European countries, Many radio stations have been using the RDS, and devotes
themselves to RDS program broadcast in the full coverage.
Description of the some RDS terminology:
1) PS (Program Service) name of the station.
2) TP (Traffic Program) identification data for traffic information broadcasting.
3) PI (Program identification) Code for identifying the radio station.
4) AF (Alternative Frequencies) Automatically search for the best other available
alternative frequency.
5) TA (Traffic Announcement) Function allowling the broadcast of traffic information.
6) PTY (Program Type) P
7) CT (Clock time) The CT feature allows this system time more accurate and stable.
8) REG (Regional selection)
9) EON (Enhanced other network) This information is used to updates other business
operations of PI, PIN, PTY, TP, TA and AF information except the FM station program ,
the receiver with EON function can received not only FM station program by the EON function,
but also listen to the cross-reference other programs traffic program.
Note:
1. RDS only available for FM stations.
2. If the radio station did not properly transmit RDS signal or the reception signal is too weak,
the RDS feature will probably can not carry out.
3. Not all FM stations provide RDS service, they do not necessarily provide the same type of
service. If you are not familiar with the RDS system, please inquire the local RDS service
details.
rogram type of radio station such as news, pop music, sports etc.
regional broadcasting program of radio station
15
Alternative Frequencies
Briefly press the AF/TA button on head unit or briefly press the AF/REG button on the remote
control to toggle alternative frequency mode on/off.
- “AF” is shown on the LCD display, when the AF function is on.
- “AF” will flash if the AF function is on, but the signal reception is getting worse.
- When the AF function is on, the unit receives the RDS radio signal strong and stable, the
“AF” will be continually lighted up on the LCD display.
When the signal is lower than a certain level, the unit will automatically search the current
RDS station by other frequency with stronger signals , and will automatically replace the
current instability signal of the frequency. If you do not want to replace the current frequency,
press the AF/TA(or AF/REG on the remote control) button again to turn off AF function.
TA (Traffic Announcement)/Emergency broadcast function
Press and hold the AF/TA button or briefly press the TA button on the remote control to turn
TA function on or off.
When the TA function has been switched on, this unit can received the RDS station signal:
1. The word “TA” will be continually lighted up on the LCD display.
2. When the information of a traffic station has been received, the word “TP” will be
continually lighted up on the LCD display.
3. During disc, USB, SD/MMC card playing or AV auxiliary input playing mode, if a traffic
announcement has been received, the unit will temporarily interrupt disc, USB, SD/MMC card
or AV auxiliary input playing (regardless of the current mode) and begin broadcasting the
announcement.
4. If the volume level is set very low, this unit will automatically change to the preset TA VOL.
5. After the traffic announcement is over, it will return to the previous mode and volume level.
REG (Regional Program) function
Press and hold the /REG button on the head unit, or press and hold the AF/REG button on
the remote control to switch the region mode on or off.
Using PTY to select a program
This unit will allow you to quickly find the required RDS station by using program type.
Briefly press the PTY button on the head unit or remote control to enter or exit the PTY search
mode.
After entering the PTY searching mode, you can select the type of program by pressing
.
Refer to the program types below:
-->NEWS -->AFFAIRS -->INFO -->SPORT -->EDUCATE --> DRAMA --> CULTURE -->
SCIENCE --> VARIED --> POP M --> ROCK M --> EASY M --> LIGHT M --> CLASSICS -->
OTHER M --> WEATHER --> FINANCE --> CHILDREN --> SOCIAL --> RELIGION -->
PHONE IN --> TRAVEL --> LEISURE --> JAZZ --> COUNTRY --> NATION M --> OLDIES -->
FOLK M --> DOCUMENT --> TEST --> ALARM -->
When you have selected a program type, the radio starts to search for broadcasts
corresponding to your choice, and stops if a corresponding broadcast is found.
If no corresponding broadcast is found, normal radio reception is resumed.
When some broadcasting stations makes up the network, a regional broadcasting program of
radio station may be listened to in other regions. Regional tracking mode allows you to always
listen to the same program. But, the network cover bad or the fluctuation terrain can cause
the transmitting interference. The radio always searches the broadcasting station that have
the best audio reception effects.
PTY
the
VOL / VOL button on the head unit or the VOL+/- button the remote control
16
Media pla ing basic y operations
To enter or exit media playing mode
During power on mode, after inserting the DISC/USB stick/ SDMMC card into the unit, briefly
press the BND / MOD button on the head unit or MODE button on the remote control to select
the to select the source: DISC/USB/SD.
Loading/Removing a disc
Press the OPEN ( ) button on the front panel to flip down the front panel, then gently insert a
disc into the disc slot with the label side facing upward, when the system detect the disc, the
disc will be drawn into the disc slot and the player will play the disc automatically soon.
If there a disc in the disc slot, press the EJECT( ) on the head unit eject the disc.
If the disc is not removed from the slot within 5 seconds, it will automatically be loaded into
the slot again.
Playing/Pausing
When playing CD/MP3 disc, a file in USB stick or SD/MMC card, briefly press the button on
the head unit or remote control to switch between play and pause.
Selecting the previous/ next track
- When playing CD/MP3 disc, a file in USB stick or SD/MMC card, briefly press the /
button on the head unit or remote control to go to the next or previous track or file.
- Press the numbered buttons on the remote control to input the serial number of a track or a
file, then press the ENTER button to confirm and play the selected track or file.
Skip forward/backward playback
1. Skip forward
When playing CD/MP3 disc, a file in USB stick or SD/MMC card, press and hold the button
on the head unit repeatedly, or briefly press the button on the remote control repeatedly to
perform fast forward at the following sequence : 2X, 4X, 8X, 20X, PLAY.
During fast forward mode, press the button to resuem normal playback.
2. Skip backward
When playing CD/MP3 disc, a file in USB stick or SD/MMC card, press and hold the button
on the head unit repeatedly, or briefly press the button on the remote control repeatedly to
perform fast rewind at the following sequence : 2X, 4X, 8X, 20X, PLAY.
During fast rewind mode, press the button to resuem normal playback.
Stop playing
- When playing CD/MP3 disc, a file in USB stick or SD/MMC card, briefly press the STOP
button on the head unit or briefly press the button on the remote control to pre-stop mode
and interrupt playback. During pre-stop mode, press the button to resume playing from the
interrupted point.
- During pre-stop mode, press the button again to stop playback. press the button to
resume playing from the first track of the current disc or the first file in USB/ SD/MMC device.
the head unit or
CD /
,
MP4 MP4 / stick /MMC
Repeat playing
Use this function when you wish to repeat a whole disc, one track, current folder on the disc.
1) Repeatedly press the RPT button on remote control, you can select one of
the repeat mode.
2) For the different kinds of disc, you can select the differetn repeat mode.
For VCD / SVCD disc:
RPT One, RPT ALL RPT OFF;
For / MP3 disc or MP3 file in USB / SD card:
RPT One, RPT DIR, RPT ALL, REP OFF;
For DVD disc:
RPT CHAPTER, RPT TITLE, RPT ALL, RPT OFF
17
Note:
RPT one Only repeat the current audio or video file (or JPEG picture file).
RPT DIR Only repeat the all the files in the current folder (included its next level subfolder)
RPT CHAPTER: Only repeat the current chapter.
RPT TITLE: Only repeat the current title.
RPT ALL: Repeat all tracks or files of the disc or USB stick / SD/MMC card.
RPT OFF: Exit the repeat mode and resume normal playing mode.
* When enabled the PBC (playback control) function, the repeat feature does not support
VCD 2.0 disc.
Repeat a specific segment on a disc
This feature allows you to specify a specific segment of the current track or file to be played
repeatedly.
1. During normal playback, press the A-B button on the remote control once to determine to
the starting point of the segment to be repeated, and “REPEAT A-" will appear on the screen.
2. Press the A-B button again to determine the end point of the segment to be repeated and
the “REPEAT A-B” will display on the screen.
3. Set point A to set point B will be repeated circularly until you turn off A-B repeat.
4. Press A-B again to cancel the A-B repeat mode and resume normal playing mode.
Random Playing
During normal playback, press the RDM button on the head unit or remote control to play any
track or file in random order. Press this button again to return to normal play.
Previewing all tracks (Intro scan)(only for CD/VCD)
Press the INT button on the head unit to play the first 10 seconds of each track on the current
disc. Press it again to stop intro scan and play the current track.
:
:
Media playing advanced operations
DVD menu playing
In order to find your favorite content conveniently, some DVD disc has been set a playing
menu, in this way, you can quickly find your favorite segment by using the DVD playing menu.
1. During DVD playback, press the TITLE button on the remote control to invoke the DVD
playing menu. When you inserted a DVD disc into disc slot just now, the DVD playing menu
will be appear on the external monitor.
2. Press the button on the remote control to select DVD menu item.
3. Finally press the ENTER button to confirm and play it. For some DVD disc, you can select
the menu item by using the number buttons on the remote control.
Playback control )PBC(
Some VCD (version 2.0 or above) or SVCD disc with PBC feature has been set playing menu,
In this way, you can find your favorite program by using the PBC menu.
1. Press the PBC button once to check whether the PBC function turning on or off.
- If the PBC function has been turned off, press the PBC button again to turn on the PBC
function and invoke the menu of PBC.
- If the PBC function has been turned on, you have to turn off first, then turn on the PBC
function again to invoke the menu of PBC.
2. After invoking a PBC menu, you can select the desired track or program by using the
numbered button or ENTER button on the remote control.
Note: During PBC playback, you can not perform the repeat, random, select track by
numbered button.
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Other documents
-
Axis AX1506BT Installation guide
-
Concertone ZX500 Operating instructions
-
RIPSpeed DVD-722B Operating instructions
-
Jensen VM8022 User manual
-
Sharp DV740 Operation Instructions Manual
-
SCOTT DPX 940 CS Owner's manual
-
SoundMax SM-CDM1042 User manual
-
Hyundai H-CMD7082 User manual
-
-
SCOTT DRX 2002 User manual
