2. McIntosh
  3. MC275
MC275

McIntosh MC275 Connection Diagrams

  • Hello! I am an AI chatbot trained to assist you with the McIntosh MC275 Connection Diagrams. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
MC275 Stereo Operation Connection Diagram
1A
McIntosh Laboratory, Inc. 2 Chambers Street Binghamton, New York 13903-2699 Phone: 607-723-3512 www.mcintoshlabs.com Part No. 04131300
Audio Preamplifier
Note: Refer to the MC275 Owner’s Manual page 10 for additional connection information.
Connection Legend:
Data Cable*- Digital Signal Cable -
Sensor/Keypad Cable - Network/RS232 Cable -
Power Control Cable* - Ground Wire -
Audio Signal Cable - AC Power Cords -
Video Signal Cable - Loudspeaker Cable -
RF Signal Cable -
* 2 conductor shielded with 1/8 inch stereo mini phone plug on each end.
Connect to
AC Outlet
Right Loudspeaker System Left Loudspeaker System
(-) (+)8Ω
(-) (+)8Ω
(+)8Ω
(-) (+)8Ω
(-)
MC275 Monaural Operation Connection Diagram
1B
McIntosh Laboratory, Inc. 2 Chambers Street Binghamton, New York 13903-2699 Phone: 607-723-3512 www.mcintoshlabs.com
Note: Refer to the MC275 Owner’s Manual page 12 for additional connection information.
Connection Legend:
Data Cable*- Digital Signal Cable -
Sensor/Keypad Cable - Network/RS232 Cable -
Power Control Cable* - Ground Wire -
Audio Signal Cable - AC Power Cords -
Video Signal Cable - Loudspeaker Cable -
RF Signal Cable -
* 2 conductor shielded with 1/8 inch stereo mini phone plug on each end.
Audio Preamplifier
Connect to
AC Outlet
Loudspeaker System
JUMPER
BAR1
(-)
(-)
(+)16Ω
(+)16Ω
To second MC275
1NOTE: When the Mode Switch is set to MONO, the
supplied Jumper Bars are used to connect the
output of the Left and Right Amplier Chan-
nels in parallel. The effective output imped-
ance of the MC275 Power Amplier is now
8Ω, even though the physical connections are
made to the 16Ω terminals.
The 8Ω terminals would be paralleled when
a 4Ω Loudpeaker is connected to the MC275
(operating in MONO Mode). Likewise the
4Ω terminals would be paralleled when a 2Ω
Loudpeaker is connected to the MC275 (oper-
ating in MONO Mode).
16
16
JUMPER
BAR1
JUMPER
BARS1
(-)
(+)8Ω
/