User Manual
Version： PDI231UFP01_V1.0_EN
PDI231UFP01
2
REVISION HISTORY
Version Date
Page
(New)
Section Description
V1.0 20190528 All All New version release
Approved by Checked by Prepared by
Model: PDI231UFP01
User Manual PDI231UFP01_V1.0_EN
I. Product Overview 2
II. Product Drawings 3
III. Installation Instruction 4
IV. Operating Instructions 5
V. Precautions 6
VI. Product Specifications 6
VII. Video Format Table 7
Contents
I Product Overview
This product (PDI231UFP01) is an integrated advertising display with high-performance single chip ARM Cortex
A9 Quad Cores, support picture, audio and video playback, also support for TF card.
1
2
3
1
1
1
Product List
Fixing the device, fixing
screws are not included
Input :
AC 100V-240v~50/60Hz 0.8A
Output :
12V/2 A
Electronic Display
Device
ItemNo. Quantity Image Remarks
Wall Mount Plate
Power Adapter
PITL confidential
15.8
60.4
597.4
12
TYPE-C
TF Card Slot
35.4
120
191
R1.75
3
User Manual PDI231UFP01_V1.0_EN
Product Drawings
Unit : mm
II
TF Card Slot
MIC-USB Interface
On / Off
Front View
Rear View
Vertical View
Upward View
Wall Mount Plate
On / Off
USB Interface
PITL confidential
1 2
1 2
Slide the buckle of the display to the both sides, click on the long holder, and then fasten the display to
the fixing plate (As following diagram shown).
Please note that TF card holder and MIC-USB card holder are at the bottom during installation
3
Release the button Fix the position
Front Diagram
Rear Diagram
Card Slot
3
Lock the button
1
Release the buckle
2
Turning outwards
3
Lift it up
4
User Manual PDI231UFP01_V1.0_EN
Installation InstructionIII
Type- C
Install the wall mount plate with screws
on the corresponding shelves.
Insert the Type-C power plug on the back of
the shelf display.
The foot stand faces
the outside of the shelf,
short one is on the top.
> Slide the buckle to the sides and hold the display slightly upwards while turning outwards.
Attachment: Disassembly Instructions
PITL confidential
Connect the cable
2
3
Click WLAN, connect the corresponding WLAN successfully.
WIFI Connection : Manual/Automatic
1 2
3
APK Installation and Uninstallation
Startup Interface
5
User Manual PDI231UFP01_V1.0_EN
Operating Instructions
Turn on the power, the screen will automatically
enter into standby interface as picture shown.
IV
Insert the TF card and connect the mouse to operate.
Right click is for Return Key.
Right click is
for Return Key
Insert the TF card
1
Click SettingsManual Mode Enter the setting interface
as follows:
1
Make sure the software “New Desktop” is installed in the device,（ ）and is running;Automatic Mode
2
Create a “router.txt file” in the TF card directory.
3
Open the “router.txt file”, select the WIFI account and input password.
Click to enter the Setting interface as follows:
Brightness
Setting
Select the icon in the settings. And then set the appropriate brightness.
1
Find the target APK through file management and click to install.Manual Installation
Enter "Settings" -- "apps", find the target app, click "UNINSTALL" after entry.Manual Uninstallation
Make sure the software “New Desktop” is installed in the device and is running;
2
Create the Install App file in the TF card directory;
3
The APK to be installed is stored in the Install App file of the TF card, inserted
into the device, and waiting for the installation to complete.
Automatic Installation
1
Make sure the software “New Desktop” is installed in the device and is running;
2
Create the Uninstall App file in the TF card directory;
3
The APK to be installed is stored in the Uninstall App file of the TF card, inserted
into the device, and waiting for the installation to complete.
Automatic Uninstall
Remark : Put the apk file to be installed into the Install App file (if the apk already exists on the device, the version
of the apk that needs to be installed must be at least higher one); the apk file to be uninstalled is placed in the
Uninstall App file, any version can be deleted directly.
(Note: if a previously existing apk is running, manually exit the apk and insert TF card for installation.)
PITL confidential
6
User Manual PDI231UFP01_V1.0_EN
Precautions
1. Before cleaning the screen, please unplug the power cord and ensure that the device is Power-off. Wipe it
gently with a clean and soft cloth without thread ends.
2. Do not expose the device to rain and sunshine, so as not to affect the normal usage.
3. Please do not block the ventilation holes or sound articulation holes of the device. Do not put the product near
the radiator, heat source or any other equipment that may affect the normal ventilation.
4. Do not disassemble or repair the device by yourself to avoid high voltage electric shock or other dangers.
Professional maintenance personnel should be invited to complete all maintenance work.
5. As the device may usually be in used in public places, voltage instability may cause equipment damage. It is
recommended to use a stable municipal power supply. Do not use a power supply together with high-power
equipment such as elevator power supply. For example, in places where the voltage is often unstable, such as
subway stations, please use the corresponding voltage regulator for voltage stabilization, otherwise, it is easy
to cause unstable work or even burn down.
6. Please read this manual carefully before inserting and unplugging TF card. If TF card cannot be inserted, do not
insert it hard to avoid damaging the TF card pin.
7. If the device does not work for a long time, please turn off the 220V power supply.
V
Product Specifications
DescriptionItem
CPU
DDR 1G DDR3
8GB / 16GB EMMC
23.1” Innolux S231AJ1 TFT LCD 158*1920
Support for TF card extension
3 * USB 2.0 ports, connect with the computer
as software upgrade interface and USB flash drive,
camera, TP and other peripheral extensions
FLASH
Display
High performance single chip
ARM Cortex A9 Quad Cores
TF Card Support multimedia playback
USB Interface
Power Input DC 12V/2A，Type-C Interface
Support for multiple languages
Support 2.4G
Standby<0.5W
Language
WIFI
Remark
VI
PITL confidential
Decoder
Video
F+A2:D16ormat /
Codec
H.263 •
•
•
•
• WebM (.webm)
• Matroska
(.mkv, Android 4.0+)
• 3GPP (.3gp)
• MPEG-4 (.mp4)
H. 264 AVC
Baseline Profile (BP)
• 3GPP (.3gp)
• MPEG-4 (.mp4)
• MPEG-TS (.ts, AAC
audio only, not seekable,
Android 3.0+)
•
(Android 5.0+)
• MPEG-4 (.mp4)
H. 264 AVC
Main Profile (MP)
H.265 HEVC
•
(Android 2.3.3+)
VP8
• WebM (.webm)
• Matroska
(.mkv, Android 4.0+)
Details
Support for H.263 is
optional in Android 7.0+
The decoder is required,
the encoder is recommended.
Main Profile Level 3 for
mobile devices and Main Profile
Level 4.1 for Android TV
Streamable only in
Android 4.0 and above
•
(Android 4.4+)
VP9
MPEG-4 SP • 3GPP (.3gp)
Supported File Type(s) /
Container Formats
Decoder Details
Image Format /
Codec
BMP
GIF
HEIF (.heic; .heif)
• PNG (.png)
JPEG (.jpg)
GIF (.gif)
BMP (.bmp)
JPEG
•
•
• Base+progressive
PNG
•
(Android 8.0+)
•
(Android 4.0+)
(Lossless, Transparency,
Android 4.2.1+)
HEIF
WebP
Supported File Type(s) /
Container Formats
WebP (.webp)
7
User Manual PDI231UFP01_V1.0_EN
(Table 1)
(Table 2)
Video Format TableVII
PITL confidential
/