Kidsmill up! User manual

Dinner Tray - User manual AUS

2

IMPORTANT! RETAIN THESE INSTRUCTIONS FOR

FUTURE REFERENCE AND READ CAREFULLY

3

INDEX

Congratulations (EN)

Warnings/Safety measures/Maintenance

Parts

Assembly

Use

Warranty (EN)

4

5

6

4

CONGRATULATIONS

Congratulations on the purchase of this Kidsmill Up! Dinner tray. This product

meets the most stringent safety requirements and is approved according to the

Australian Standard AS 4684:2009. Using this tray can only be safe when used

according to these instructions. Please read this instruction manual carefully

and store it for future reference. The safety of your child may be aected if these

instructions are not followed.

WARNINGS

WARNING – Follow the manufacturer's instructions.

WARNING – Do not leave your child unattended.

WARNING – Do not use this dinner tray unless all components are correctly tted

and adjusted.

WARNING – Position the high chair away from solid structures and benches to avoid

injuries caused by falls and by acces to dangerous items.

SAFETY MEASURES

• Do not use the dinner tray if any part is broken, torn or missing.

• Keep out of child’s reach when not in use or make sure the tray is locked

correctly.

• Be aware of the risk of open res and other sources of strong heat, such as

electric bar res, gas res, etc. in the near vicinity of the tray.

MAINTENANCE

• We recommend cleaning this dinner tray using a damp cloth.

• Never use aggressive or abrasive cleaning agents because these can aect the

tray or and can also be detrimental to the health of your child.

• Ensure all locking devices work correctly and check the locks and ttings

regularly.

KIDSMILL DINNER TRAY UP!

5

PARTS

Screw D3x10,5 (4x) Screw ST4,2x25 (2x)Sliding Hook

Sliding hook mounting bracket Clip safety bar Hinge Bush

6

ASSEMBLY

Step 3: Attach the clip for the safety bar to

the bottom of the dinner tray. Do not fully

tighten the screws yet.

2x

Step 1: Screw the hinge bushes to the

(disassembled) legs. If the chair is already

assembled, remove only one leg at the time.

2x

Step 2: Screw down the sliding hook at the

bottom of the seat.

2x

7

ASSEMBLY

Step 6: Slide de clip against the safety bar

and tighten the screws so the clip is xed.

Step 5: Now lock the dinner tray, slide it

rmly backwards until you hear a clear 'Click'

on both sides.

´Click´

Step 4: Click the dinner tray onto the hinge

bushes of the high chair.

´Click´

8

USE

Step 4: Pull the dinner tray to the front. Keep

the buttons pinched to remove the dinner

tray or release them to turn the tray to the

back of the chair.

Step 5: U can now rotate the dinner tray to

the rear for storage. Caution! First, remove

your child from the chair before rotating the

dinner tray to the rear.

Step 1 and 2: Placing and locking the dinner

tray, see 'Installation' step 4 and 5.

Step 3: Unlock the dinner tray by pinching

the two release buttons, located at the

bottom of the dinner tray, at the same time.

9

USE

Step 8: Unlock the dinner tray by pinching

the release buttons and pushing it down.

Attention! This lock only works with the seat

in the highest position.

Step 7: Now push the dinner tray up into

the lock until you hear a clear 'Click' on both

sides.

´Click´

Step 6: To lock the dinner tray, rst pull out

the sliding hook from underneath the seat.

10

WARRANTY

Validity: 2 years from date of purchase.

The warranty is only valid in conjunction with proof of purchase. The warranty covers

the replacement of the entire product or parts when there a manufacturing defect. After

the expiration of the warranty there are costs attached to any repairs. The supplier takes

no responsibility for any damage or injury to persons, animals and belongings due to

misuse of the harness or by failure to follow the accompanying instructions.

Exclusion

All rights in respect of the guarantee and the responsibility of the supplier shall lapse if

the product:

• Is dismantled by unauthorized persons;

• Is not properly used or stored.

Furthermore, all external damage to the product that does not aect the proper

functioning is excluded from the warranty.

11

Notes: ....................................................................................................................................................

.................................................................................................................................................................

WARRANTY FORM

Customer name: ........................................................................................................................................................

Order number: ............................................................................................................................................................

Quantity Damaged Missing

...................

................... ...................

Product:

Article number:

Serial number:

..................................................................

...................................................................

...............................................................

Part number (p. 4)

EN - In case of damaged or missing parts, please ll in this form and send

to the following E-mail address: