Pyle PAMP1000 User manual

Type
User manual

Pyle PAMP1000 is a high-fidelity stereo power amplifier designed to deliver exceptional audio performance for a variety of applications. With its robust 80 watts x 2 power output, it effortlessly amplifies both voice and music, ensuring crystal-clear and dynamic sound reproduction. Its wide frequency response, ranging from 10 Hz to 50 kHz, guarantees accurate and detailed audio across the entire spectrum.

Pyle PAMP1000 is a high-fidelity stereo power amplifier designed to deliver exceptional audio performance for a variety of applications. With its robust 80 watts x 2 power output, it effortlessly amplifies both voice and music, ensuring crystal-clear and dynamic sound reproduction. Its wide frequency response, ranging from 10 Hz to 50 kHz, guarantees accurate and detailed audio across the entire spectrum.

PAMP1000
www.pyleaudio.com
80W X 2 MAX
STEREO POWER AMPLIFIER
1 - Pyle Home PAMP1000 Manual
WARNING: To reduce the risk of fire or shock hazard, do not
expose this product to rain or moisture.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: To reduce the risk of electric shock, do not remove
cover or back. No user-serviceable parts inside. Refer servicing
to qualified personnel.
This symbol is intended to alert you to the - 6 presence of un-
insulated dangerous voltage within the product’s enclosure that
might be of sufficient magnitude to constitute a risk of electric
shock. Do not open the product’s case.
This symbol is intended to inform you that important
operating and maintenance instructions are included in the
literature accompanying this product.
CAUTION
1. Read Instructions — All the safety and operating instructions should be read before the appliance is operated.
2. Retain Instructions — The safety and operating instructions should be retained for future reference.
3. Heed Warnings — All warnings on the appliance and in the operating instructions should be adhered to.
4. Follow Instructions — All operating and use instructions should be followed.
5. Water and Moisture The appliance should not be used near water -for example, near a bathtub, washbowl, kitchen sink, laundry tub,
swimming pool, or a wet basement.
6. Ventilation — The appliance should be situated so that its location or position does not interfere with its proper ventilation. For example, the
appliance should not be situated on a bed, sofa, rug, or similar surface that may block the ventilation openings: or placed in a built-in
installation, such as a bookcase or cabinet that may impede the flow of air through the ventilation openings.
7. Heat — The appliance should be situated away from heat sources such as radiators, heat registers, stoves, or other appliances
(including amplifiers) that produce heat.
8. Power Sources — The appliance should be connected to a power supply only of the type described in the operating instructions or
as marked on the appliance.
9. Grounding or Polarization — Precaution should be taken to insure that the grounding or polarization means of an appliance is not defeated.
10. Power-Cord Protection — Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed
upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point at which they exit from the
appliance.
11. Cleaning — The appliance should be cleaned only as recommended by the manufacturer.
12. Power Lines — An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or
power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should
be taken to keep from touching such power lines or circuits as contact with them might be fatal.
13. Nonuse Periods — The power cord of the appliance should be unplugged from the outlet when the appliance is
to be left unused for a long period of time.
14. Object and Liquid Entry —
Care should be taken so that objects do not fall and liquids are not spilled into the enclosure through openings.
15. Carts and Stands — If the appliance is used with a cart or stand, the cart or stand should be a type recommended by
the manufacturer.
An appliance and cart combination should be moved with care. Quick stops, excessive force,
and uneven surfaces cause the appliance and cart combination to overturn.
16. Mounting — The appliance should be mounted only as recommended by the manufacturer.
17. Damage Requiring Service — The appliance should be serviced by qualified service personnel when:
A. The power-supply cord or plug has been damaged.
B. Objects have fallen into, or liquid has been spilled into the appliance enclosure.
C. The appliance has been exposed to rain.
D. The appliance has been dropped, or the enclosure damaged.
E. The appliance does not appear to operate normally or exhibits a marked change in performance.
18. Servicing — The user should not attempt to service the appliance beyond that described in the user’s operating instructions. All other
servicing should be referred to qualified personnel.
19. Overloading — Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock.
20. Replacement Parts — When replacement parts are required, be sure the service technician has used replacement parts specified by the
manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock or other hazards.
21. Safety Check — Upon completion of any service or repairs to this appliance, ask the service technician to perform safety checks to
determine that the appliance is in proper operating condition.
IMPORTANT SAFETY INSTRUCTIONS
Pyle Home PAMP1000 Manual - 2
Your new PYLE HOME PAMP Amplifier
gives you the power and versatility you need in a professional sound system.
The wide frequency response of it handles easily amplification of voice and music.
The signal sensing of dual inputs turns the amplifier on automatically when music
is sensed on RCA inputs. The activation of Line 1 input that will override Line 2
input makes the amplifier perfectly as a zone amplifier for a multiroom distribution
audio system.
FEATURES AND CONTROLS
3 - Pyle Home PAMP1000 Manual
FEATURES AND CONTROLS
Pyle Home PAMP1000 Manual - 4
CONNECTION DIAGRAM-A:
CONNECTION DIAGRAM-B:
In this application the TV audio signal acts as "Priority" source at Line 1 input and a
distributed audio signal from the other audio system acts as "Primary" source at Line
2 input. Whenever the TV is activated, its signal overrides the distributed signal of
Line 2, only the TV audio will be heard via the amp, but the distributed audio of Line
2 input will still be present at Line 2 Output and sent to additional zone. Once TV
is turned off, the amp will switch to the distributed audio automatically as an audio
source, if the distributing audio is still active.
In this application a computer's sound card acts as "Priority" source at Line 1 input
and the TV audio signal acts as "Primary" local source at Line 2 input. Whenever the
computer is activated, its signal overrides the TV signal of Line 2, only the computer
audio will be heard via the amp. Once the computer is turned off, the amp will switch
to the TV automatically as an audio source, if the TV is still active.
Input Impedance, balanced (unbalanced) ............................. 20 k-Ohms
Continuous Output Power
Stereo Mode
20 Hz to 20 kHz, 8 Ohms .................................................. 60 Watts x 2
1 kHz, 4 Ohms, ................................................................. 70 Watts x 2
Maximum Power, 8 Ohms.................................................. 65 Watts x 2
Maximum Power, 4 Ohms.................................................. 80 Watts x 2
Bridged Mode
Maximum, 20 Hz to 20 kHz, 8 Ohms ......................................130 Watts
Maximum, 1 kHz, 4 Ohms, .....................................................160 Watts
THD at rated output power............................................................ 0.1%
Frequency Response +/- 3 dB.......................................10 Hz to 50 kHz
Signal to Noise Ratio A-Weighted.................................................100dB
Speaker Impedance
Stereo.................................................................................. 4-16 Ohms
Bridged................................................................................ 8-16 Ohms
Speaker Impedance...................................................... A,B (4-16 ohms)
Bridged (8-16 ohms)
Power Requirement.................................120V AC 60Hz/230V AC 50Hz
Power Fuse.............. T 4AL 250V for 110-120V and T 2AL for 220-240V
Dimensions, inches (mm) WxHxD .. 16.53 x 2.36 x 8.26 (420 x 60 x 210)
Weight, lbs (kg) ..................................................................... 9.08(4.12)
5 - Pyle Home PAMP1000 Manual
Specifications
Specifications are typical; individual units might vary.
Specifications are subject to change and improvement without notice.
Pyle Home PAMP1000 Manual - 6
Your Pyle Home Amplifier is an
example of superior design and
7 - Pyle Home PAMP1000 Manual
All PYLE HOME products are carefully constructed and tested before
shipment. Units purchased in the USA are warranted to be free of
defects in material and workmanship for one (1) year from the date
of purchase. This warranty is limited to the original retail purchaser
of the amplifier.
Should the unit fail due to factory defects in material or workmanship,
your unit will be repaired or replaced at the sole discretion of PYLE.
To obtain warranty service, you must first call our Consumer Return
Hotline at (718) 236-6948 to obtain a Return Authorization Number.
This R.A. # must appear on the outside of your package and on all
paperwork relating to your return.
When returning the unit to us for warranty service, it must be carefully
packed and shipped, prepaid. to:
You must also include the following items with your return:
A copy of your sales receipt or other proof of purchase
A brief letter, indicating the problem you are experiencing with the product
Include in your letter your return address, daytime phone number and
R.A. number
Also include a check or money order for $15.00 for return shipping,
handling and insurance, or provide your Visa/MC
Our obligation under this warranty is limited to the repair or replacement
of the defective unit when it is returned to us prepaid. This warranty
will be considered void if the unit was tampered with, improperly
serviced or subject to misuse, neglect or accidental damage
Limited Warranty
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

Pyle PAMP1000 User manual

Type
User manual

Pyle PAMP1000 is a high-fidelity stereo power amplifier designed to deliver exceptional audio performance for a variety of applications. With its robust 80 watts x 2 power output, it effortlessly amplifies both voice and music, ensuring crystal-clear and dynamic sound reproduction. Its wide frequency response, ranging from 10 Hz to 50 kHz, guarantees accurate and detailed audio across the entire spectrum.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI