KRAUS KPF-1683ORB Specification

Type
Specification

This manual is also suitable for

KPF-1683
Single Handle Commercial Style Pull Down Kitchen Faucet
Faucet Dimensions (without deck plate)
Overall Height: 23 1/4"
Overall Width: 4 5/8"
Spout Height: 7"
Spout Reach: 8 5/8"
*Deck Plate Dimensions
Overall Dimensions: 10 3/8" x 2 1/2" x 1/2"
Features
Commercial Style Pull Down Faucet
Brass Body
ABS Sprayer
Lead Free Brass Waterway
360° Swivel Spout
Flow Rate: 1.8 gpm (6.8L/min) @ 60 psi
Dual Function Sprayhead - Spray/Stream
25mm Ceramic Cartridge
27 1/2" Integrated Nylon Waterlines
Dome Shaped Screen Washer
Silicone Nozzles
Quick Weight
Quick Connect Sprayer Hose
Swivel Sprayer Connector
11 3/4" Hose Length
Connections 3/8" Compression
Max Countertop Thickness (without deck plate) 2 1/4"
Max Countertop Thickness (with deck plate) 1 3/4"
TPI of aerator in the Sprayer - M22*1
Accessories Included
Hex Wrench
Weight
*Deck Plate
Available Finishes
Spot Free Stainless Steel
Oil Rubbed Bronze
CODES/STANDARDS:
Product Certification
cUPC (ASME A112.18.1/CSA B125.1)
NSF/ANSI Standard 61 and 372 certified by IAPMO
CAL GREEN, CEC, DOE, ADA
NOTE: Some Kitchen Faucets that do not have a
pull out or pull down sprayer may be connected to a
portable dishwasher. Pull out and pull down faucets
should never be connected to portable dishwashers
because potential pressure fluctuations during
washing cycles cause hose ruptures or leaks.
Warranty
Kraus Limited Lifetime Warranty
see website for details www.kraususa.com
Kraus USA Customer Service
1.800.775.0703 [email protected]
R
SPECIFICATION SHEET
8 5/8"
(220mm)
7"
(178mm)
23 1/4"
(589mm)
8 3/4"
(223mm)
11 1/2"
(292mm)
10 1/2"
(266mm)
REV. May 6, 2020
* Optional Deck Plate
3/8" Compression
2 1/2"
(64mm)
Ø1 1/2"
(37mm)
10 3/8"
(265mm)
1/2"
(13mm)
1/2"
(13mm)
10 3/4"
(273mm)
4 5/8"
(117mm)
MAX
2 1/4"
(57mm)
  • Page 1 1

KRAUS KPF-1683ORB Specification

Type
Specification
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI