Skil 9781 Instructions Manual

Brand: Skil

Model: 9781

Category: Power tools

Type: Instructions Manual

This manual is also suitable for

Skil 9781: The Right Choice for Demanding Grinding Tasks!

With power of 1,800 watts, the Skil 9781 grinder excels in metalworking. It cuts, grinds, and deburrs metal surfaces smoothly and efficiently. Changing accessories is as easy as it gets, thanks to the incorporated spindle lock system. The auxiliary handle provides a secure grip for precise control during operation. Unleash the Skil 9781's capabilities, whether you're working on metal or stone, and experience effortless grinding and cutting like never before!

Skil 9781: The Right Choice for Demanding Grinding Tasks!

ANGLE GRINDER

9425 (F0159425..)

ORIGINAL INSTRUCTIONS 5

NOTICE ORIGINALE 9

ORIGINALBETRIEBSANLEITUNG 15

ORIGINELE GEBRUIKSAANWIJZING 21

BRUKSANVISNING I ORIGINAL 26

ORIGINAL BRUGSANVISNING 31

ORIGINAL BRUKSANVISNING 36

ALKUPERÄISET OHJEET 41

MANUAL ORIGINAL 45

MANUAL ORIGINAL 51

ISTRUZIONI ORIGINALI 56

EREDETI HASZNÁLATI UTASÍTÁS 62

PŮVODNÍM NÁVODEM K POUŽÍVÁNÍ 68

ORİJİNAL İŞLETME TALİMATI 72

INSTRUKCJA ORYGINALNA 77

ПОДЛИННИК РУКОВОДСТВА

ПО ЭКСПЛУАТАЦИИ

ОРИГІНАЛЬНА ІНСТРУКЦІЯ

З ЕКСПЛУАТАЦІЇ

ΠΡΩΤΤΥΠ ∆ΗΓΙΩΝ ΡΗΣΗΣ 95

INSTRUCŢIUNI DE FOLOSIRE

ORIGINALE

101

ОРИГИНАЛНО РЪКОВОДСТВО

ЗА ЕКСПЛОАТАЦИЯ

106

PÔVODNÝ NÁVOD NA POUŽITIE 112

ORIGINALNE UPUTE ZA RAD 118

ORIGINALNO UPUTSTVO ZA RAD 122

IZVIRNA NAVODILA 127

ALGUPÄRANE KASUTUSJUHEND 132

ORIĢINĀLĀ LIETOŠANAS PAMĀCĪBA 137

ORIGINALI INSTRUKCIJA 142

156

153

SKIL Europe BV - Konijnenberg 60 10/10 2610Z00784

4825 BD Breda - The Netherlands

FIN

SRB

SLO

EST

FIN

SRB

SLO

EST

www.skilmasters.com

MAX.

Ø 125 mm

Ø 22 mm

M14

RUBBER

Watt

750

1,8 kg

EPTA 01/2003

11000/min

9425

8 9

max. 125 mm

ACCESSORIES

7a 7b 7c

SKIL Nr. 2610Z00995

Angle grinder 9425

INTRODUCTION

• Thistoolisintendedforgrinding,cuttinganddeburring

metalandstonematerialswithouttheuseofwater;with

the appropriate accessories the tool can also be used

forbrushingandsanding

• Cuttingoperationswithabrasivecut-offwheelsare

onlyallowedwhenacut-offguard(availableas

optionalSKILaccessory2610Z00995)isused

• Readandsavethisinstructionmanual3

TECHNICAL SPECIFICATIONS 1

TOOL ELEMENTS 2

A Spindle

B Clamping ﬂange

C Spanner

D Spindle-lock button

E Auxiliary handle

F Protectiveguard

G Mounting ﬂange

H On/offlockingswitch

J Ventilation slots

SAFETY

GENERAL SAFETY INSTRUCTIONS

WARNING!Readallsafetywarningsandall

instructions.Failuretofollowthewarningsandinstructions

mayresultinelectricshock,fireand/orseriousinjury.Saveall

warningsandinstructionsforfuturereference. The term

“powertool”inthewarningsreferstoyourmains-operated

(corded) power tool or battery-operated (cordless) power tool.

1)WORKAREASAFETY

a) Keepworkareacleanandwelllit. Cluttered or dark

areasinviteaccidents.

b) Donotoperatepowertoolsinexplosive

atmospheres,suchasinthepresenceofflammable

liquids,gasesordust. Power tools create sparks

whichmayignitethedustorfumes.

c) Keepchildrenandbystandersawaywhileoperatinga

powertool. Distractions can cause you to lose control.

2)ELECTRICALSAFETY

a) Powertoolplugsmustmatchtheoutlet.Never

modifythepluginanyway.Donotuseanyadapter

plugswithearthed(grounded)powertools.

Unmodiﬁed plugs and matching outlets will reduce risk

ofelectricshock.

b) Avoidbodycontactwithearthedorgrounded

surfacessuchaspipes,radiators,rangesand

refrigerators.Thereisanincreasedriskofelectric

shockifyourbodyisearthedorgrounded.

c) Donotexposepowertoolstorainorwetconditions.

Waterenteringapowertoolwillincreasetheriskof

electric shock.

d) Donotabusethecord.Neverusethecordfor

carrying,pullingorunpluggingthepowertool.Keep

cordawayfromheat,oil,sharpedgesormoving

parts.Damagedorentangledcordsincreasetheriskof

electric shock.

e) Whenoperatingapowertooloutdoors,usean

extensioncordsuitableforoutdooruse.Useofacord

suitableforoutdoorusereducestheriskofelectricshock.

f) Ifoperatingapowertoolinadamplocationis

unavoidable,useanearthleakagecircuitbreaker.

Useofanearthleakagecircuitbreakerreducestherisk

ofelectricshock.

3)PERSONALSAFETY

a) Stayalert,watchwhatyouaredoinganduse

commonsensewhenoperatingapowertool.Donot

useapowertoolwhileyouaretiredorunderthe

influenceofdrugs,alcoholormedication. A moment

ofinattentionwhileoperatingpowertoolsmayresultin

serious personal injury.

b) Usepersonalprotectiveequipment.Alwayswear

eyeprotection.Protectiveequipmentsuchasdust

mask,non-skidsafetyshoes,hardhat,orhearing

protectionusedforappropriateconditionswillreduce

personal injuries.

c) Preventunintentionalstarting.Ensuretheswitchis

intheoff-positionbeforeconnectingtopower

sourceand/orbatterypack,pickinguporcarrying

thetool. Carrying power tools with your ﬁnger on the

switchorenergisingpowertoolsthathavetheswitch

oninvitesaccidents.

d) Removeanyadjustingkeyorwrenchbeforeturning

thepowertoolon.Awrenchorakeyleftattachedtoa

rotatingpartofthepowertoolmayresultinpersonalinjury.

e) Donotoverreach.Keepproperfootingandbalance

atalltimes.Thisenablesbettercontrolofthepower

tool in unexpected situations.

f) Dressproperly.Donotwearlooseclothingor

jewellery.Keepyourhair,clothingandglovesaway

frommovingparts.Looseclothes,jewelleryorlong

haircanbecaughtinmovingparts.

g) Ifdevicesareprovidedfortheconnectionofdust

extractionandcollectionfacilities,ensuretheseare

connectedandproperlyused.Useofdustcollection

can reduce dust-related hazards.

4)POWERTOOLUSEANDCARE

a) Donotforcethepowertool.Usethecorrectpower

toolforyourapplication. The correct power tool will

dothejobbetterandsaferattherateforwhichitwas

designed.

b) Donotusethepowertooliftheswitchdoesnotturn

itonandoff. Any power tool that cannot be controlled

with the switch is dangerous and must be repaired.

c) Disconnecttheplugfromthepowersourceand/or

thebatterypackfromthepowertoolbeforemaking

anyadjustments,changingaccessories,orstoring

powertools.Suchpreventivesafetymeasuresreduce

theriskofstartingthepowertoolaccidentally.

d) Storeidlepowertoolsoutofthereachofchildrenand

donotallowpersonsunfamiliarwiththepowertoolor

theseinstructionstooperatethepowertool. Power

toolsaredangerousinthehandsofuntrainedusers.

e) Maintainpowertools.Checkformisalignmentor

bindingofmovingparts,breakageofpartsandany

otherconditionthatmayaffectthepowertool’s

operation.Ifdamaged,havethepowertoolrepaired

beforeuse. Many accidents are caused by poorly

maintained power tools.

f) Keepcuttingtoolssharpandclean. Properly

maintained cutting tools with sharp cutting edges are

less likely to bind and are easier to control.

g) Usethepowertool,accessoriesandtoolbitsetc.,in

accordancewiththeseinstructions,takinginto

accounttheworkingconditionsandtheworktobe

performed.Useofthepowertoolforoperationsdifferent

fromthoseintendedcouldresultinahazardoussituation.

5)SERVICE

a) Haveyourpowertoolservicedbyaqualifiedrepair

personusingonlyidenticalreplacementparts. This

willensurethatthesafetyofthepowertoolismaintained.

SAFETY INSTRUCTIONS FOR ANGLE GRINDERS

1)SAFETYINSTRUCTIONSFORALLOPERATIONS

a) Thispowertoolisintendedtofunctionasagrinder,

sander,wirebrushorcut-offtool.Readallsafety

warnings,instructions,illustrationsand

specificationsprovidedwiththispowertool.Failure

tofollowallinstructionslistedbelowmayresultin

electricshock,reand/orseriousinjury.

b) Thispowertoolisnotrecommendedforpolishing.

Operationsforwhichthepowertoolwasnotdesigned

may create a hazard and cause personal injury.

c) Donotuseaccessorieswhicharenotspecifically

designedandrecommendedbythetoolmanufacturer.

Just because the accessory can be attached to your

powertool,itdoesnotassuresafeoperation.

d) Theratedspeedoftheaccessorymustbeatleast

equaltothemaximumspeedmarkedonthepower

tool.Accessoriesrunningfasterthantheirratedspeed

can ﬂy apart.

e) Theoutsidediameterandthethicknessofyour

accessorymustbewithinthecapacityratingofyour

powertool.Incorrectly sized accessories cannot be

adequatelyguardedorcontrolled.

f) Thearboursizeofwheels,flanges,backingpadsor

anyotheraccessorymustproperlyfitthespindleof

thepowertool.Accessories with arbour holes that do

notmatchthemountinghardwareofthepowertoolwill

runoutofbalance,vibrateexcessivelyandmaycause

lossofcontrol.

g) Donotuseadamagedaccessory.Beforeeachuse

inspecttheaccessorysuchasabrasivewheelsfor

chipsandcracks,backingpadsforcracks,tearor

excesswear,wirebrushesforlooseorcracked

wires.Ifthepowertooloraccessoryisdropped,

inspectfordamageorinstallanundamaged

accessory.Afterinspectingandinstallingan

accessory,positionyourselfandbystandersaway

fromtheplaneoftherotatingaccessoryandrunthe

powertoolatmaximumnoloadspeedforone

minute.Damaged accessories will normally break apart

during this test time.

h) Wearpersonalprotectiveequipment 4. Depending

onapplication,usefaceshield,safetygogglesor

safetyglasses.Asappropriate,weardustmask,

hearingprotectors,glovesandshopaproncapable

ofstoppingsmallabrasiveorworkpiecefragments.

Theeyeprotectionmustbecapableofstoppingying

debrisgeneratedbyvariousoperations.Thedustmask

orrespiratormustbecapableofltratingparticles

generated by your operation. Prolonged exposure to

high intensity noise may cause hearing loss.

i) Keepbystandersasafedistanceawayfromwork

area.Anyoneenteringtheworkareamustwear

personalprotectiveequipment.Fragmentsofthe

workpieceorofabrokenaccessorymayyawayand

causeinjurybeyondtheimmediateareaofoperation.

j) Holdthepowertoolonlybytheinsulatedgripping

surfaceswhenperforminganoperationwherethe

cuttingtoolmaycontacthiddenwiringoritsown

powercord.Contactwitha“live”wirewillalsomake

exposedmetalpartsofthepowertool“live”andshock

the operator.

k) Positionthecordclearofthespinningaccessory.If

youlosecontrol,thecordmaybecutorsnaggedandyour

hand or arm may be pulled into the spinning accessory.

l) Neverlaythepowertooldownuntiltheaccessory

hascometoacompletestop.The spinning accessory

maygrabthesurfaceandpullthepowertooloutof

your control.

m) Donotrunthepowertoolwhilecarryingitatyour

side.Accidental contact with the spinning accessory

couldsnagyourclothing,pullingtheaccessoryinto

your body.

n) Regularlycleanthepowertool’sairvents.The

motor’sfanwilldrawthedustinsidethehousingand

excessiveaccumulationofpowderedmetalmaycause

electrical hazards.

o) Donotoperatethepowertoolnearflammable

materials.Sparks could ignite these materials.

p) Donotuseaccessoriesthatrequireliquidcoolants.

Usingwaterorotherliquidcoolantsmayresultin

electrocution or shock.

2)KICKBACKANDRELATEDWARNINGS

• Kickbackisasuddenreactiontoapinchedorsnagged

rotatingwheel,backingpad,brushoranyotheraccessory.

Pinchingorsnaggingcausesrapidstallingoftherotating

accessory which in turn causes the uncontrolled power

tooltobeforcedinthedirectionoppositeofthe

accessory’srotationatthepointofthebinding.

• Forexample,ifanabrasivewheelissnaggedorpinched

bytheworkpiece,theedgeofthewheelthatisentering

intothepinchpointcandigintothesurfaceofthe

material causing the wheel to climb out or kick out. The

wheelmayeitherjumptowardorawayfromthe

operator,dependingonthedirectionofthewheel’s

movementatthepointofpinching.Abrasivewheels

may also break under these conditions.

• Kickbackistheresultofpowertoolmisuseand/or

incorrect operating procedures or conditions and can be

avoidedbytakingproperprecautionsasgivenbelow.

a) Maintainafirmgriponthepowertoolandposition

yourbodyandarmtoallowyoutoresistkickback

forces.Alwaysuseauxiliaryhandle,ifprovided,for

maximumcontroloverkickbackortorquereaction

duringstart-up.Theoperatorcancontroltorquereactions

orkickbackforces,ifproperprecautionsaretaken.

b) Neverplaceyourhandneartherotatingaccessory.

Theaccessorymaykickbackoveryourhand.

c) Donotpositionyourbodyintheareawherepower

toolwillmoveifkickbackoccurs.Kickback will propel

the tool in the direction opposite to the wheel’s

movementatthepointofsnagging.

d) Usespecialcarewhenworkingcorners,sharp

edgesetc.Avoidbouncingandsnaggingthe

accessory.Corners,sharpedgesorbouncinghavea

tendency to snag the rotating accessory and cause loss

ofcontrolorkickback.

e) Donotattachasawchainwoodcarvingbladeor

toothedsawblade.Suchbladescreatefrequent

kickbackandlossofcontrol.

3)SAFETYWARNINGSSPECIFICFORGRINDINGAND

CUTTING OFF OPERATIONS

a) Useonlywheeltypesthatarerecommendedfor

yourpowertoolandthespecificguarddesignedfor

theselectedwheel.Wheelsforwhichthepowertool

wasnotdesignedcannotbeadequatelyguardedand

areunsafe.

b) Theguardmustbesecurelyattachedtothepower

toolandpositionedformaximumsafety,sotheleast

amountofwheelisexposedtowardstheoperator.

Theguardhelpstoprotecttheoperatorfrombroken

wheelfragmentsandaccidentalcontactwiththewheel.

c) Wheelsmustbeusedonlyforrecommended

applications.For example: Do not grind with the side

ofacut-offwheel.Abrasivecut-offwheelsareintended

forperipheralgrinding;sideforcesappliedtothese

wheels may cause them to shatter.

d) Alwaysuseundamagedwheelflangesthatareof

correctsizeandshapeforyourselectedwheel.

Proper wheel ﬂanges support the wheel thus reducing

thepossibilityofwheelbreakage.Flangesforcut-off

wheelsmaybedifferentfromgrindingwheelanges.

e) Donotuseworndownwheelsfromlargerpowertools.

Awheelintendedforalargerpowertoolisnotsuitablefor

thehigherspeedofasmallertoolandmayburst.

4)ADDITIONALSAFETYWARNINGSSPECIFICFOR

CUTTING OFF OPERATIONS

a) Donot“jam”thecut-offwheelorapplyexcessive

pressure.Donotattempttomakeanexcessivedepth

ofcut.Overstressingthewheelincreasestheloading

andsusceptibilitytotwistingorbindingofthewheelin

thecutandthepossibilityofkickbackorwheelbreakage.

b) Donotpositionyourbodyinlinewithandbehindthe

rotatingwheel.Whenthewheel,atthepointof

operation,ismovingawayfromyourbody,thepossible

kickback may propel the spinning wheel and the power

tool directly at you.

c) Whenthewheelisbindingorwheninterruptingacut

foranyreason,switchoffthepowertoolandhold

thepowertoolmotionlessuntilthewheelcomesto

acompletestop.Neverattempttoremovethe

cut-offwheelfromthecutwhilethewheelisin

motion,otherwisekickbackmayoccur.Investigate

andtakecorrectiveactiontoeliminatethecauseof

wheel binding.

d) Donotrestartthecuttingoperationintheworkpiece.

Letthewheelreachfullspeedandcarefullyre-enter

thecut.Thewheelmaybind,walkuporkickbackifthe

power tool is restarted in the workpiece.

e) Supportpanelsoranyoversizedworkpieceto

minimizetheriskofwheelpinchingandkickback.

Large workpieces tend to sag under their own weight.

Supports must be placed under the workpiece near the

lineofcutandneartheedgeoftheworkpieceonboth

sidesofthewheel.

f) Useextracautionwhenmakinga“pocketcut”into

existingwallsorotherblindareas.The protruding

wheelmaycutgasorwaterpipes,electricalwiringor

objects that can cause kickback.

5)SAFETYWARNINGSSPECIFICFORSANDING

OPERATIONS

a) Whensanding,donotuseexcessivelyoversized

sandingdiscpaper.Followthemanufacturers’

recommendationswhenselectingsandingpaper.

Larger sanding paper extending beyond the sanding

pad presents a laceration hazard and may cause

snagging,tearingofthedisc,orkickback.

6)SAFETYWARNINGSSPECIFICFORWIRE

BRUSHING OPERATIONS

a) Beawarethatwirebristlesarethrownbythebrush

evenduringordinaryoperation.Donotoverstress

thewiresbyapplyingexcessiveloadtothebrush.

The wire bristles can easily penetrate light clothing

and/ or skin.

b) Iftheuseofaguardisrecommendedforwire

brushing,donotallowanyinterferenceofthewire

wheelorbrushwiththeguard.Wire wheel or brush

may expand in diameter due to work load and

centrifugalforces.

GENERAL

• Onlyusetheangeswhicharesuppliedwiththistool

• Thistoolshouldnotbeusedbypeopleundertheageof

16 years

• Thistoolisnotsuitableforwetgrinding/cutting

• Alwaysdisconnectplugfrompowersourcebefore

makinganyadjustmentorchanginganyaccessory

ACCESSORIES

• SKILcanassureawlessfunctioningofthetoolonly

when original accessories are used

• Formounting/usingnon-SKILaccessoriesobservethe

instructionsofthemanufacturerconcerned

• Neverusereducorsoradaptorstotlarge-hole

grinding/cutting discs

• Neveruseaccessorieswitha“blind”threadedhole

smaller than M14 x 21 mm

OUTDOOR USE

• Connectthetoolviaafaultcurrent(FI)circuitbreaker

withatriggeringcurrentof30mAmaximum

BEFORE USE

• Beforeusingthetoolforthersttime,itis

recommendedtoreceivepracticalinformation

• Alwayscheckthatthesupplyvoltageisthesameasthe

voltageindicatedonthenameplateofthetool(tools

witharatingof230Vor240Vcanalsobeconnectedto

a 220V supply)

• AlwaysmountauxiliaryhandleE2andprotective

guard F 2;neverusethetoolwithoutthem

• Usesuitabledetectorstofindhiddenutilitylinesor

callthelocalutilitycompanyforassistance (contact

withelectriclinescanleadtoreorelectricalshock;

damagingagaslinecanresultinanexplosion;

penetrating a water pipe will cause property damage or

an electrical shock)

• Donotworkmaterialscontainingasbestos (asbestos

is considered carcinogenic)

• Dustfrommaterialsuchaspaintcontaininglead,some

woodspecies,mineralsandmetalmaybeharmful

(contactwithorinhalationofthedustmaycause

allergic reactions and/or respiratory diseases to the

operatororbystanders);wearadustmaskandwork

withadustextractiondevicewhenconnectable

• Certainkindsofdustareclassiedascarcinogenic(such

as oak and beech dust) especially in conjunction with

additivesforwoodconditioning;wearadustmaskand

workwithadustextractiondevicewhenconnectable

• Followthedust-relatednationalrequirementsforthe

materials you want to work with

• Becarefulwhencuttinggrooves,especiallyin

supporting walls (slots in supporting walls are subject to

country-specicregulations;theseregulationsaretobe

observedunderallcircumstances)

• Securetheworkpiece (a workpiece clamped with

clampingdevicesorinaviceisheldmoresecurelythan

by hand)

• Donotclampthetoolinavice

• Usecompletelyunrolledandsafeextensioncordswith

acapacityof16Amps(U.K.13Amps)

DURING USE

• Inrushcurrentscauseshort-timevoltagedrops;under

unfavourablepowersupplyconditions,otherequipment

maybeaffected(ifthesystemimpedanceofthepower

supplyislowerthan0,25Ohm,disturbancesare

unlikelytooccur);ifyouneedfurtherclarication,you

may contact your local power supply authority

• Ifthecordisdamagedorcutthroughwhileworking,do

nottouchthecord,butimmediatelydisconnecttheplug

• Neverusethetoolwhencordisdamaged;haveit

replacedbyaqualiedperson

• Incaseofelectricalormechanicalmalfunction,

immediatelyswitchoffthetoolanddisconnecttheplug

• Incaseofcurrentinterruptionorwhentheplugis

accidentallypulledout,unlocktheon/offswitchH2

immediatelyinordertopreventuncontrolledrestarting

AFTER USE

• Afterswitchingoffthetool,neverstoptherotationof

theaccessorybyalateralforceappliedagainstit

WHEN CONNECTING NEW 3-PIN PLUG (U.K. ONLY):

• Donotconnecttheblue(=neutral)orbrown(=live)wire

inthecordofthistooltotheearthterminaloftheplug

• Ifforanyreasontheoldplugiscutoffthecordofthis

tool,itmustbedisposedofsafelyandnotleftunattended

USE

• Mountingofaccessories2

! disconnecttheplug

- clean spindle A and all parts to be mounted

- tighten clamping ﬂange B with spanner C while

pushing spindle-lock button D

! pushspindle-lockbuttonDonlywhenspindleAis

atastandstill

- forremovingaccessorieshandlevice-versa

! grinding/cuttingdiscsbecomeveryhotduringuse;

donottouchthemuntiltheyhavecooleddown

! alwaysmountbackingpadwhenusingsanding

accessories

! neveruseagrinding/cuttingdiscwithoutthelabel

(“blotter”)whichisgluedontoit(ifprovided)

• MountingofauxiliaryhandleE5

! disconnecttheplug

- screwauxiliaryhandleEontheright,thetop,ortheleft

ofthetool(dependingontheworktobecarriedout)

• Removing/mounting/adjustingofprotectiveguardF6

! disconnecttheplug

! ensurethattheclosedsideoftheprotective

guardalwayspointstotheoperator

- ifnecessary,adjustprotectiveguardFbytightening

screwXwhichispre-setatmanufacturing(ensure

thattheprotectiveguardisclosed)

• Beforeusingthetool

- ensure that accessory is correctly mounted and ﬁrmly

tightened

- checkifaccessoryrunsfreelybyturningitbyhand

- test-runtoolforatleast30secondsathighest

no-loadspeedinasafeposition

- stopimmediatelyincaseofconsiderablevibrationor

otherdefectsandchecktooltodeterminethecause

• On/offlockingswitchH7

- switch on tool 7a

! beawareofthesuddenimpactwhenthetoolis

switchedon

! beforetheaccessoryreachestheworkpiece,the

toolshouldrunatfullspeed

- lock switch 7b

- unlockswitch/switchofftool7c

! beforeswitchingoffthetool,youshouldliftit

fromtheworkpiece

! theaccessorycontinuestorotateforashorttime

afterthetoolhasbeenswitchedoff

• Grinding8

- movethetoolbackandforthwithmoderatepressure

! neveruseacuttingdiscforsidegrinding

• Cutting9

- do not tilt the tool while cutting

- alwaysmovethetoolinsamedirectionasarrowon

toolhead,inordertopreventthetoolfrombeing

pushedoutofthecutinanuncontrolledmanner

- donotapplypressureonthetool;letthespeedof

the cutting disc do the work

- theworkingspeedofthecuttingdiscdependsonthe

material to be cut

- do not brake cutting discs with side pressure

• Holdingandguidingthetool

- alwaysholdthetoolrmlywithbothhands,soyou

willhavefullcontrolofthetoolatalltimes

! whileworking,alwaysholdthetoolatthe

grey-colouredgriparea(s)0

- provideforasecurestance

- payattentiontothedirectionofrotation;alwayshold

thetoolso,thatsparksandgrinding/cuttingdusty

awayfromthebody

- keepventilationslotsJ2uncovered

MAINTENANCE/SERVICE

• Alwayskeeptoolandcordclean(especiallyventilation

slots J 2)

! donotattempttocleanventilationslotsby

insertingpointedobjectsthroughopenings

! disconnecttheplugbeforecleaning

• Ifthetoolshouldfaildespitethecaretakenin

manufacturingandtestingprocedures,repairshouldbe

carriedoutbyanafter-salesservicecentreforSKIL

power tools

- send the tool undismantledtogetherwithproofof

purchasetoyourdealerorthenearestSKILservice

station(addressesaswellastheservicediagramof

the tool are listed on www.skileurope.com)

ENVIRONMENT

• Donotdisposeofelectrictools,accessoriesand

packagingtogetherwithhouseholdwastematerial

(onlyforEUcountries)

- inobservanceofEuropeanDirective2002/96/ECon

wasteofelectricandelectronicequipmentandits

implementationinaccordancewithnationallaw,

electrictoolsthathavereachedtheendoftheirlife

must be collected separately and returned to an

environmentallycompatiblerecyclingfacility

- symbol !willremindyouofthiswhentheneedfor

disposing occurs

DECLARATION OF CONFORMITY

• Wedeclareunderoursoleresponsibilitythatthis

productisinconformitywiththefollowingstandardsor

standardizeddocuments:EN60745,EN61000,

EN55014,inaccordancewiththeprovisionsofthe

directives2006/95/EC,2004/108/EC,2006/42/EC

• Technicalfileat:SKILEuropeBV(PT-SEU/PJE),

4825BDBreda,NL

Arno van der Kloot

Vice President

Operations & Engineering

SKIL Europe BV, 4825 BD Breda, NL

Jan Trommelen

Approval Manager

06.09.2010

NOISE/VIBRATION

• MeasuredinaccordancewithEN60745thesound

pressurelevelofthistoolis91dB(A)andthesound

powerlevel102dB(A)(standarddeviation:3dB),and

thevibration✱ (hand-armmethod;uncertainty

K=1.5m/s²)

✱ whensurfacegrinding7.3m/s²

✱ whensanding3.5m/s²

! otherapplications(suchascutting-offorwire

brushing)mayhavedifferentvibrationvalues

• Thevibrationemissionlevelhasbeenmeasuredin

accordancewithastandardisedtestgiveninEN60745;

it may be used to compare one tool with another and as

apreliminaryassessmentofexposuretovibrationwhen

usingthetoolfortheapplicationsmentioned

- usingthetoolfordifferentapplications,orwith

differentorpoorlymaintaintedaccessories,may

signiﬁcantly increasetheexposurelevel

- thetimeswhenthetoolisswitchedofforwhenitis

runningbutnotactuallydoingthejob,may

signiﬁcantly reducetheexposurelevel

! protectyourselfagainsttheeffectsofvibrationby

maintainingthetoolanditsaccessories,keeping

yourhandswarm,andorganizingyourwork

patterns

Meuleused’angle 9425

INTRODUCTION

• Cetoutilsertaumeulage,autronçonnageetàl’ébarbage

depiècesenmétaletenpierresansutiliserdel’eau;

combinéavecdesaccessoiresspéciques,cetoutilpeut

égalementserviraubrossageetauponçage

• Lesopérationsdecoupeavecdisquesàtronçonner

abrasifsnesontautoriséesquesiuneprotectionde

tronçonnage(disponibleenoptioncomme

accessoireSKIL2610Z00995)estutilisée

• Lisezetconservezcemanueld’instruction3

SPECIFICATIONS TECHNIQUES 1

ELEMENTSDEL’OUTIL2

A Arbre

B Bride de serrage

C Clé

D Bouton de blocage de l’arbre

E Poignéeauxiliaire

F Protège-main

G Bride de montage

H Interrupteurmarche/arrêtdeverrouillage

J Fentesdeventilation

Skil 9781 Instructions Manual

Brand: Skil

Model: 9781

Category: Power tools

Type: Instructions Manual

This manual is also suitable for

Skil 9781: The Right Choice for Demanding Grinding Tasks!

Download PDF

report

Skil 9781 Instructions Manual

This manual is also suitable for

Skil 9781 Instructions Manual

Related papers

Other documents