ELIPTA EG1923R Installation guide

Hello! I've reviewed the datasheet for the ELIPTA Path Light EG1923R. This document provides technical details, installation notes and key features such as its solid brass construction, IP65 rating, 12V DC input and the pre-wired 1.5m cable. I'm ready to answer your questions about this product.
What is the maximum wattage of the lamp?

What is the IP rating of the product?

What type of lamp base does this product use?

Is the lamp included with the product?

Part code

EG1923R

Diffuser

Clear

Dimensions (mm)

380x25

Cable length (mm)

1500

Construction

Solid Brass

Finish

Bronze

Class

Class III

IP rating

IP65

Maximum wattage

Lamp base

Lamp included

Dimmable

Dependant on lamp

Input voltage

12V DC

Net weight (Kg)

497

Gross weight (Kg)

617

Warranty

2 Years

Manufactured in accordance with

BS EN 60598

Origin of manufacture

PRC

Installation notes

Ensure mains supply is isolated prior to installation of this

product.

Unscrew the top and insert lamp. Apply small amount of grease to

the thread and secure top to the body of the fitting.

Refer to the instruction manual for further guidance.

Note – This product must be installed by a qualified electrician.

EG1923R- Elipta Stem LED Path Light