Unbranded D-W118965939 User manual

Assembly Instruction

WARNING:

Read all instructions carefully and completely before assembly and use. Retain for future reference.

Periodically check all hardware and re-tighten as necessary.

For residential (non-commercial) use only.

DO NOT sit or stand on product. Use only for intended purpose.

DO NOT exceed 80lbs for the tabletop and 10lbs for the drawers respectively , evenly distributed.

Step1: Put the Item body (A)_tabletop on a soft surface to protect the finish. Attach the Legs (B) with Hex

bolts (H1) and Washers (H2)using Allen key (H3) as below left photo shown. Do not overtighten the

hardware before you assembly all bolts. Attached the Foot pads (H4) to the bottom of all Legs as shown

in right photo below.

Notice: If you have any questions about your purchase or any other product for sale, please contact

Service@jimsidea.com with your order ID, our customer service representatives are available to help.

A. Item Body

B. Item Leg

H1. Hex Bolt

H2.Washer

H3.Alley Key

H4.Foot Pad

X8 (+1 extra)

Page 1 of 1

X8 (+1 extra)

Assembly Finished