![](//vs1.manuzoid.com/store/data-gzf/9d9159e2aaa2f4591a6dc64b21a3710c/2/002250595.htmlex.zip/bg2.jpg)
Adjust Tension and Position
360
Stand
SKU: 303
Before Installing slected iPad
Holder you can increase the
rotational friction if desired.
Adjust all 3 screws evenly to
desired tension.
Tighten all 3 screws Firmly to
“Lock” in Position if no
movement is desired.
Enclosure Mounting
Assembly Instructions
Sheet 2 of 2
www.compulocks.com | online@maclocks.com | +1 800-948-0344
©Compulocks Brands Inc. All Rights Reserved.j
LOVE IT LOCK IT
Table Top Mounting
132
Mark holes
2X 2X 2X 2X
Drill holes with 5/32” drill bit
2” deep
Snap plastic screw caps shut
Install plastic screw caps and
screws
4
M4 x 8mm Screws have
been provided for mounting
of iPad Holders with
100mm x 100mm Patterns.