Shark NV681 User manual

  • Hello! I've reviewed the Quick Start Guide for the Shark Rotator Powered Lift-Away Speed NV681 Vacuum Cleaner. This document outlines the basic steps for assembly, operation, and maintenance, including how to use the Lift-Away feature, switch between floor types, and manage the dust cup and filters. I'm ready to assist with any questions you may have about using your vacuum cleaner.
  • How often should I empty the dust cup?
    How often should I rinse the pre-motor filters?
    How often should I rinse the HEPA filter?
Please be sure to read the enclosed Shark® Owner’s Guide prior to using your unit.
ASSEMB LY
A Vacuum Pod
B Motorized Floor Nozzle
C Handle & Hose
D Wand
E Pet Multi-Tool
F Duster Crevice Tool
G Hard Floor Hero
WHAT’S INSIDE TIPS
NV681_QSG_Mv5
QUICK START GUIDE
POWERED
LIF T-AWAY
®
SPEED
A
D
E F G
Slide hose clip
into back of wand
for convenience.
To store your vacuum, wrap
cord around cord hooks.
For quick cord access,
rotate upper hook down
and remove cord.
For additional parts and accessories,
visit sharkaccessories.com
Attach onboard
accessories
(Connect)
OR
(Click)
(Click)
(Click)
B
(Click)
MAINTENANCE
Empty the dust cup after each use.
Brushroll access
MAINTENANCE:
Rinse pre-motor
filters every 3 months
and HEPA filter once a
year. Rinse with water
only. Allow filters to
air-dry completely
before reinstalling.
See enclosed Owner’s
Guide for more
information on how to
clean and replace
the filters.
Locks
clean
C
2 WAYS TO CLEAN
@sharkcleaning
UPRIGHT
LIFT-AWAY®
For questions or to register your product, contact us at 1-800-798-7398 or visit us online at sharkclean.com
Power
Push the Power button to
turn the vacuum on or o.
Floor Setting
Slide the Floor Selector up or
down to choose
Hard Floor or Carpet.
Lift-Away
Release
OR
Handle
Release
Wand
Release
Wand Release
Suction
Control
Attach accessories to handle or wand.
Step on floor nozzle and
tilt handle to activate brushroll.
/