Tripp Lite TRIPP-LITE N035-001 2 to 1 RJ45 Splitter Adapter Cable User guide

Category
Networking cables
Type
User guide

Tripp Lite TRIPP-LITE N035-001 2 to 1 RJ45 Splitter Adapter Cable allows you to transmit two 10/100 Ethernet signals through a single Cat5/Cat5e cable, saving you the hassle of installing additional cables. Connect two workstations to one Cat5/Cat5e cable, supporting network speeds up to 100 Mbps. Ideal for expanding your network without the cost and effort of running new cables. Wall-mountable with built-in flanges for easy installation and organization. Two units are required for proper installation.

Tripp Lite TRIPP-LITE N035-001 2 to 1 RJ45 Splitter Adapter Cable allows you to transmit two 10/100 Ethernet signals through a single Cat5/Cat5e cable, saving you the hassle of installing additional cables. Connect two workstations to one Cat5/Cat5e cable, supporting network speeds up to 100 Mbps. Ideal for expanding your network without the cost and effort of running new cables. Wall-mountable with built-in flanges for easy installation and organization. Two units are required for proper installation.

Specifications
For proper installation, two N035-001 units are required
2-to-1 RJ45 Splitter Adapter Cable, 10/100
Ethernet Cat5/Cat5e (M/2xF), 6 in.
MODEL NUMBER: N035-001
Connects two 10/100 Ethernet devices, such as servers or computers, to two ports of a network switch
over one Cat5/Cat5e cable drop.
Description
The N035-001 2-to-1 RJ45 Splitter Adapter Cable (M/2xF) allows you to transmit two 10/100 Ethernet
signals through one Cat5/Cat5e cable, saving you the time, effort and cost of adding a second cable drop.
Two N035-001 units are required: one connected to two network devices, such as servers or computers,
and one connected to two ports of a network switch. A single Cat5/Cat5e cable connects the two N035-
001 units through a four-pair UTP wall plate or patch panel. The RJ45 jacks transmit on 1, 2, 3 and 6.
Drilled flanges allow you to mount the unit on a wall. The N035-001 cannot be used to share two
computers on one network line.
Features
Connects 2 Workstations with One Cat5/Cat5e Cable
Supports 10/100Base-T network transmissions
Saves expense and effort of adding second cable drop
Supports wall-mounting via built-in flanges
RJ45 jacks transmit on 1, 2, 3 and 6
2 units are required for proper installation
Cannot be used to split a single network signal for use with 2 computers
Highlights
Connects 2 workstations with
one Cat5/Cat5e cable
Supports Ethernet network
speeds up to 100 Mbps
Saves expense and effort of
adding second cable drop
Supports wall-mounting via built-
in flanges
2 units are required for proper
installation
Package Includes
N035-001 2-to-1 RJ45 Splitter
Adapter Cable (M/2xF), 6 in.
Owner's manual
OVERVIEW
UPC Code 037332200969
Technology Cat5/5e
1 / 2
© 2021 Tripp Lite. All rights reserved. All product and company names are trademarks or registered trademarks of their respective holders. Use of them does
not imply any affiliation with or endorsement by them. Tripp Lite has a policy of continuous improvement. Specifications are subject to change without notice.
Tripp Lite uses primary and third-party agencies to test its products for compliance with standards. See a list of Tripp Lite's testing agencies:
https://www.tripplite.com/products/product-certification-agencies
PHYSICAL
Color Silver
Cable Jacket Color Gray
Cable Length (ft.) 0.5
Cable Length (m) 0.15
Shipping Dimensions (hwd / cm) 13.49 x 10.01 x 1.27
Shipping Dimensions (hwd / in.) 5.31 x 3.94 x 0.50
Shipping Weight (kg) 0.05
Shipping Weight (lbs.) 0.11
CONNECTIONS
Number of Ports 2
Side A - Connector 1 (2) RJ45 (FEMALE)
Side B - Connector 1 RJ45 (MALE)
WARRANTY
Product Warranty Period
(Worldwide) 3-year limited warranty
2 / 2
  • Page 1 1
  • Page 2 2

Tripp Lite TRIPP-LITE N035-001 2 to 1 RJ45 Splitter Adapter Cable User guide

Category
Networking cables
Type
User guide

Tripp Lite TRIPP-LITE N035-001 2 to 1 RJ45 Splitter Adapter Cable allows you to transmit two 10/100 Ethernet signals through a single Cat5/Cat5e cable, saving you the hassle of installing additional cables. Connect two workstations to one Cat5/Cat5e cable, supporting network speeds up to 100 Mbps. Ideal for expanding your network without the cost and effort of running new cables. Wall-mountable with built-in flanges for easy installation and organization. Two units are required for proper installation.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI