AGT INDUSTRIAL AGT-4IN1BCT Owner's manual

Brand: AGT INDUSTRIAL

Model: AGT-4IN1BCT

Type: Owner's manual

AGT INDUSTRIAL AGT-4IN1BCT is a versatile attachment that combines four functions into one: digging, grading, scraping, and dozing. With its quick-attach design, it can be easily mounted on compatible skid steers, making it a valuable tool for a wide range of tasks. The AGT-4IN1BCT features a durable construction with a reinforced bucket and frame, ensuring longevity and reliability on the job site. Its efficient hydraulic system provides smooth and precise operation, allowing for precise control and maneuverability.

PRODUCT MANUAL

AGT INDUSTRIAL

4 IN 1 Bucket

Ver.1.1.3

Model:AGT-4IN1BCT

TABLE OF CONTENTS 2/9

TO THE OWNERS 3/9

TABLE OF CONTENTS

SAFETY PRECAUTIONS 4/9

ROTOTILLER ASSEMBLES 7/9

PERATION INSTRUCTIONS 8/9

NOTES 9/9

TO THE OWNERS

GENERAL COMMENTS

Congratulations for having this 4 IN 1 Bucket! Your 4 IN 1 Bucket was carefully

designed and manufactured to give you years of dependable service. Your 4

IN 1 Bucket will require some minor maintenance to keep it in top working

condition.

Please observe all safety precautions and maintenance procedures as

described in this manual.

BEFORE OPERATION

Thoroughly read and understand the instructions given in this manual before

operation. Refer to the "Safety Label" section, read all instructions noted on

them.

Do not allow anyone to operate his equipment who has not fully read and

comprehended this manual and who has not been properly trained in the

safe operation of the equipment.

SERVICE

Please remember to use only manufacturer replacement parts. Substitute

parts may not meet the standards required for safe, dependable operation.

SAFETY PRECAUTIONS

BEFORE OPERATION

1. The operator must read the operation manual carefully before

installation, operation or maintenance. Improper operation will cause the

machine damage or the operator death.

2. Read all the safe signs and safe declarations. Follow all the professional

safe terms, local laws or the professional directions.

3. Familiar with the 4 IN 1 Bucket about functions, specs and operation.

Replace the to-be-damaged parts in time. Make sure all the hydraulic

installations and couplings connect firmly, and all the safe signs stick on the

suitable positions clearly.

1. Operator should be familiar with all functions of the unit.

2. Make sure all guards and shields are in place and secured before operating

implement.

3. Keep all persons away from equipment and work area.

4. Dismounting from a moving unit can cause serious injury or death.

5. Keep hands, feet, and clothing away from power-driven parts.

6. Detach and store implement in an area where children normally do not play.

Secure implement by using blocks and supports.

IMPORTANT

Always wear proper safety glasses, goggles, or a face shield when

driving pins in or out, or when any operation causes dust, flying

debris, or any other hazardous material.

SAFETY PRECAUTIONS

Operator Safety

►Wear protective clothing and equipment appropriate for the job. Clothing

should be snug fitting without fringes and pull strings to avoid entanglement

with moving parts.

►Prolonged exposure to loud noise can cause hearing impairment or

hearing loss. Wear suitable hearing protection such as earmuffs or earplugs.

►Operating equipment safely requires the operators all attention, Avoid

wearing radio headphones while operating machinery.

Tool Safety

►Inspect entire machine before each use. Replace damaged or worn parts.

►Check for fuel leaks and make sure all fasteners are in place and securely

fastened.

SAFETY PRECAUTIONS

Wear Protective Equipment

►Escaping fluid under pressure can penetrate the skin causing serious injury.

►Avoid the hazard by relieving pressure before disconnecting hydraulic lines

or performing work on the system.

►Make sure all hydraulic fluid connections are tight and all hydraulic hoses

and lines are in good condition before applying pressure to the system.

►Use a piece of paper or cardboard, NOT BODY PARTS to check for

suspected leaks.

►Wear protective gloves and safety glasses or goggles when working with

hydraulic systems.

►DO NOT DELAY. If an accident occurs, see a doctor familiar with this type of

injury immediately. Any fluid injected into the skin or eyes must be treated

within a few hours or gangrene may result.

Transportation and Storing

►Store machine and fuel where fuel vapors cannot reach sour combustion

like, water heaters, electric motors, switches, furnaces, etc.

►Always secure the machine with tie downs or similar restraints when

transporting.

►The machine be stored in a manner that prevents it from falling, rolling or

tipping.

BUCKET ASSEMBLES

S/N PART NO. PART DESCRIPTION QTYS NOTE

1 Bucket Weldment 1

2 Frame Weldment 1

3 Pin Bearing Weldment 1 2

4 Pin Bearing Weldment 2 2

5 Pin Bearing Weldment 3 2

6 Bucket Plate 1

7 Bucket Bracket 1

8 Nozzle 40*50*30 4

9 Hex Bolt M12*40 16

10 Ring φ12 16

11 Lock Washer φ12（Galvanized）16

12 Common Nut M12 16

13 Lock Washer φ10（Galvanized）6

14 Bolt M10*25（Galvanized）6

15 Ringφ10 6

16 Grease Fittiing M10*1 6

17 4IN1 Bucket Cylinder 2

P9P7

OPERATION INSTRUCTIONS

Never run the skid steer engine in a closed building without adequate

ventilation, as the exhaust fumes are very dangerous.

1. Always make sure all 4N1 bucket components are properly installed and securely fastened

BEFORE operation.

2. Always start the engine from the operator's seat with all the transmission lever(s) and 4N1

bucket drive lever (if applicable) in neutral.

3. DO NOT bypass the safety system by shorting across the terminals of the starter motor to

start the engine. This may cause the skid steer to move suddenly.

4. If the safety start system does not work, consult your dealer immediately.

5. DO NOT use the 4N1 bucket near the edge of drop-offs or banks.

6. DO NOT use the 4N1 bucket on steep slopes as overturn may result.

7. Operate up and down (not across) intermediate slopes. Avoid sudden starts and stops.

8. Drive skid steer backwards up steeper slopes.

9. Slow down before you change directions on any slope.

10. Use wheel weights on your skid steer to increase stability on slopes.

11. Make sure the skid steer is counterweighted as recommended by your dealer. Weights

provide the necessary balance to improve stability, traction and steering.

12. Be especially observant of the operating area and terrain. Watch for holes, rocks, or other

hidden hazards. ALWAYS inspect the area prior to using the 4N1 bucket.

13. Keep the parking brake on at all times during transportation.

14. Always drive at a safe speed relative to local conditions and ensure that your speed is low

enough for an emergency stop to be safe and secure.

15. Always keep the skid steer in gear to provide engine braking when going downhill. Do not

coast.

16. Park the skid steer/4N1 bucket on level ground, place the transmission in neutral, set the

parking brake, disengage the Aux hydraulics, lower the equipment to the ground, place all

levers including auxiliary control levers in neutral, shut off the engine and remove the ignition

key BEFORE leaving the skid steer.

AGT INDUSTRIAL AGT-4IN1BCT Owner's manual

AGT INDUSTRIAL AGT-4IN1BCT Owner's manual

AGT INDUSTRIAL AGT-4IN1BCT Owner's manual

Related papers

Other documents