2. Sunricher
  3. 0-10V BLE Ceiling Mounted PIR Sensor Controller
0-10V BLE Ceiling Mounted PIR Sensor Controller

Sunricher 0-10V BLE Ceiling Mounted PIR Sensor Controller Owner's manual

  • Hello! I've reviewed the product datasheet for the SUNRICHER 0-10V BLE Ceiling Mounted PIR Sensor Controller. This document details the controller's features, including its Bluetooth mesh network, PIR sensing capabilities, and 0-10V signal output, along with instructions for installation and operation. I'm ready to answer any questions you have about the device.
  • What is the typical wireless communication range?
    How can the device be reset?
    What is the output signal of device?
Product Datasheet
Please read all instructions before installation
0-10V BLE Ceiling Mounted
PIR Sensor Controller
IC
Parameters
Product info
0-10V BLE Ceiling Mounted
PIR Sensor Controller
www.sunricher.com
Input
12-24VDC Max. 20mA
Power Current Operating
temperature
Signal
Bluetooth
Output,
0/1-10V
Relative
humidity
8% to 80%
Environment Others
Size
See dimensions
Control
Dimming
Curve
Logarithmic
Dimming
Method
PWM
Reset Key: Long press it to help
withdraw the device from internet/APP
LED flashes quickly indicates success.
Light sensor: Ambient light
detection and daylight harvesting
V+
NC
GND
+ 10V
Presense indicator
NC： No Connection
0°C~+45°C
IC
Features
Dimension
www.sunricher.com
• PIR sensing with daylight haversting function
• sensor controller, Bluetooth® mesh network0-10V BLE ceiling mounted
• Mesh network, which has a much longer control distance, transmits received signals to
neighboring devices
• All devices on 0-10V line are broadcast controlled by mobile application
• Supporting our kinetic energy switches and EnOcean switches EWSSB and EWSDB
• In typical indoor environment, the range for wireless communication is 20m to 25m . Actual range
is dependent on field installation.
• Available with Magnetic reset (Touch the top part of sensor for 5 seconds)
• Waterproof grade: IP20
• Built-in 20mA 0-10V signal output
• On-board antenna
• 5 years warranty
0-10V BLE Ceiling Mounted
PIR Sensor Controller
IC
Application
Specifications
• Time-of-Day dimming schedule
• Daylight harvesting
• Auto and advanced demand response programs
• Occupancy/Vacancy detection
• Low/High-end trimming
• Energy monitoring
• Light-level stability
• Configurable dim-and-linger occupancy
• Personalized setting profile
• Multi-scenes control
• Advanced occupancy detections
• Work with kinetic switch keypad and dimmer wallstation
ENERGY SAVINGS COMFORT & CONVENIENCE
• Detection area diameter: 8m @ 2.5m height
• Testing height: 2.5m
• Warranty: 5 years
• Operating temperature: 0°C to 45°C
• Agency approbations: UL Listed /FCC/ RoHS/ BQB...
www.sunricher.com
SENSING ENVIRONMENT AND APPROBATION
Silvair Commissioning Tools
1. Power up the sensor. The load should
come on immediately.
3. Enter the room or make some movement
and check that the load switches on.
2. Vacate the room or remain very still and
wait for the load to switch off .
Bend the springs up and push detector
through hole in ceiling. When fully
inserted the springs snap back to hold
the device in place.To avoid injury, take
care when bending springs.
Installation complete.
12
3
0-10V BLE Ceiling Mounted
PIR Sensor Controller
IC
Detection Pattern
www.sunricher.com
2.5m
8m
16m
2.5m/8.2ft
0
2m
0
The detection area for movement sensor can be roughly divided into two parts:
Slow movement (person moving < 1.0'/s or 0.3m/s)
Quick movement (person moving > 1.3'/s or 0.4m/s)
Coverage Side View Coverage Top View
4m
6m
2m
4m
6m
6m 4m 2m 02m 4m 6m
0-10V BLE Ceiling Mounted
PIR Sensor Controller
2m
0m
3.0m/10ft
3.7m/12ft
4m
6m 2m 4m 6m
6m
8m
8m
8m 8m
IC
Warning
• DO NOT install with power applied to device
• DO NOT expose the device to moisture
Operation
• Do wiring according to connection diagram
• Press and hold down the “Reset” button on the controller over 5 seconds until the
indicator flashes , which means it has been reset .
• Kindly refer to for further pairing
• Available with Magnetic reset (Touch the top part of sensor for 5 seconds)
Wiring
Silvair commissioning User Manual
www.sunricher.com
V-
V+
OUTPUT
L
N
G
INPUT
12/24V
CV PSU
0/1-10V Dimmable
Driver
ACN
ACL
DIM-
DIM+
LED+
LED-
L N
LED+ +
LED- -
LED light
V + NC +10V
GND
0-10V BLE Ceiling Mounted
PIR Sensor Controller
IC
www.sunricher.com
IC
Statement
Update log
Date Version Update content Update by
2022-11-12 V1.5 FCC/IC Update Romeo
Subject to change without notice.Please contact us if you have any question.
IC STATEMENT
FCC STATEMENT
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment o ffand on, the user is encouraged to try to correct the interference by
one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the
user's authority to operate the equipment.
(1) This device may not cause interference; and
(1) l'appareil ne doit pas produire de brouillage, et
This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils
the following two conditions:
radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes :
(2) This device must accept any interference, including interference that may cause undesired
operation of the device.
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est
susceptible d'en compromettre le fonctionnement.
0-10V BLE Ceiling Mounted
PIR Sensor Controller
/