Acclaim Lighting TW40061GY User manual

I have reviewed the provided installation instructions for the TREND TW40061 light fixture. The document details the steps required to properly install the unit, from preparing the wall to securing the fixture and installing the bulb. It also outlines safety precautions about power and electrical work and mentions that the bulb is not included. Please feel free to ask me any questions you have about this document.
What is the maximum wattage for the bulb?

Is the bulb included?

What should I do before installing the fixture?

TW40061

INSTALLATION INSTRUCTIONS

Please read carefully and save these instructions, as you may need them at a later date.

CAUTION

GENERAL

All electrical connections must be in accordance with local and National Electrical Code (N.E.C.)

standards. If you are unfamiliar with proper electrical wiring connections obtain the services of a

qualified electrician.

Remove the fixture and the mounting package from the box and make sure that no parts are

missing by referencing the illustrations on the installation instructions.

WARNING: Risk of Fire. Consult a qualified electrician to ensure correct branch circuit

conductor. Min 90ºC supply conductors.

Turn off the main power at the circuit breaker before installing the fixture, in order to prevent

possible shock.

ASSEMBLY AND INSTALLATION

1. Make four ¼” holes in the wall, insert plastic anchors(1) into holes.

2. Secure the mounting plate(3) to wall with self-tapping screw(2).

3. Place the backplate(5) onto mounting plate(3) and secure with set screw(4).

4. Install the bulb (7, not included) into the socket.

Do not exceed maximum suggested wattage - Max.60W

DO NOT USE BARE HANDS TO TOUCH THE BULB.

INSTALLATION IS NOW COMPLETE

1. PLASTIC ANCHOR

2. SELF-TAPING SCREW

3. MOUNTING PLATE

4. SET SCREW

5. BACKPLATE

6. KNOB

7. BULB

8. METAL SHADE