2. Delta
  3. BH1000
BH1000

Delta BH1000 User manual

  • Hello! I've reviewed the Assembly Instructions for the delta Bike Hitch BH1000. This document provides a step-by-step guide on how to assemble the hitch which is designed to hold a bicycle by the front fork. The document also includes safety warnings to prevent unsafe use. I'm here to help if you have any questions about the assembly or use of this Bike Hitch.
  • What size of drill bit is needed?
    Are bolts included?
    Can a person be on the bike when mounted?
Assembly instructions BH1000
Bike Hitch™
WARNING
The Bike Hitch is designed to hold a bicycle only and
has not been designed to support a rider and should
never be used with a person on the bike.
Place Bike Hitch in desired location
and mark one hole for drilling.
Drill hole using 1/4" bit.
1
2
3
4
5
IMPORTANT SAFETY NOTE
Wear eye protection when using power tools.
Insert 1/4" (6mm) diameter bolt through hole and
tighten securely.
(Bolts are not included - length will
vary with application)
Drill second hole using Bike Hitch’s base as a guide.
Insert second bolt and tighten securely.
To prevent loosening, we recommend the use of nuts
with nylon inserts, thread locking uid, or lock washers.
Front Fork
Assembly video
Visit designbydelta.com/downloads
120922
/