ProOne Under Counter ProMax User manual

Brand
ProOne
Model
Under Counter ProMax
Type
User manual
For technical support call
1(800)544-3533 or email
[email protected]
Under Counter ProMax Dual Extension Kit
This kit is designed to separate a dual under counter system into two
separate units.Intended for use when there’s not enough room for the
dual system mounted in one location.
(c)
(b)
Contents
Your kit includes
the following:
(a) bracket w/4 screws (2)
(b) brass fittings (2)
(c) stainless steel 30”
flex hose with 3/8”
female ends
Installing Your Kit
1.
2.
3.
4.
5.
6.
8.
7.
9.
(a)
Turn off the water supply line going to your dual system before
removal.
Remove the dual mounting bracket from your system.
While holding one housing, turn the other counter clockwise
to detach the connected housings.
Remove the nipple connector.
Install a bracket using the
supplied screws to each
housing base
Insert a new fitting using
Teflon tape into the
outlet of the pre-sediment
filter and one into the
inlet of the primary
filter.Tighten securely.
Mount both housings
making sure the included
flex hose will reach each
housing.
Attach the flex hose to
both fittings installed.
Attach the inlet water
supply line.
Slowly turn the water
back on while looking
for any possible leaks.
*Periodically inspect your
system for any developing leaks.
10.
(b)(b)
(a) (a)
(c)
  • Page 1 1

ProOne Under Counter ProMax User manual

Brand
ProOne
Model
Under Counter ProMax
Type
User manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents