2. Defender
  3. Pro Scout Max Extreme
Pro Scout Max Extreme

Defender Pro Scout Max Extreme User guide

  • Hello, I'm a chat assistant and after reviewing the provided document, I can assist you with your questions about the Browning Defender Pro Scout Max Extreme BTC-PSMX trail camera. The document covers initial setup, cellular configurations via the Strike Force Wireless app, various camera settings like capture delay and picture size, and also provides guidance on how to perform a manual cellular test. Feel free to ask any questions you might have.
  • How do I set up the cellular connection?
    What picture sizes are supported?
    How do I perform a manual cellular test?
    What are the available capture delay options?
CELLULAR SETUP
Download the Strike Force Wireless app from the App Store or Google
Play on your mobile device. Set up an account on the new App. From
the App, select “Setup New Camera”. This will bring up a QR code reader.
Power on the trail camera and press the Mode button. Highlight
either ATT or Verizon as your preferred carrier. Confirm your selection.
Scan the QR Code that appears on the camera’s screen with the QR
code reader on your mobile app. This will register the camera informat ion
on your Strike Force Wireless account. Follow the App instructions
for picking your camera’s data. After 5 minutes, your camera will be set
up on the cellular network.
You can do a manual test by navigating to the LTE TEST camera menu.
This will make test communication to your account at
Strike Force Wireless.
CAMERA SETTINGS
After powering on the trail camera, press the mode button to access the avaliable
setting options. The setting options are as follows:
Set Date
Set Time
Camera Mode: Trail / Video
Capture Delay:1, 5, 10, 30 seconds, 1, 2, 5, 10, 30, 60 minutes
Picture Size: 2, 4, 8 or 20MP
MultiShot: 1-8 shots per trigger
Temperature Units: Fahrenheit or Celcius
Picture Info Strop: on / off
SD Card Management: on / off
Motion Test: Activate to test the PIR range and check setup in the field.
Camera Name: Add a custom name for your camera in tis field.
Set Default: Resets your camera to factory defaults.
Delete All: This erases and reformats your SD card.
Software Update: You can update your camera software here.
LTE Test: You can run a manual cellular test here by pressing the OK button.
FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used
in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between th e equipment and receiver.
• Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement: This equipment complies with FCC
radiation exposure limits set forth for an uncontrolled environment. In
order to avoid the possibility of exceeding the FCC radio frequency
exposure limits, Human proximity to the antenna shall not be less than
20cm (8 inches) during normal operation.
Shielded cables with ferrite must be used with this unit to ensure
compliance with the Class B FCC limits.
Warning: Changes or modifications to this unit not expressly approved
by the party responsible for compliance could void the user’s autho rity
to operate the equipment.
This user manual covers both versions of the
Defender Pro Scout Max Extreme Cameras
Model Number: BTC-PSMX
FCC ID: 2ALGTBTC-PSMX
/